Printables
Air intake caps for Mazda Miata Jackson Racing M45 Supercharger
- Creator (as listed at the source)
- nintendoeats
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Automotive
- Downloads
- 2
Overview
I expect this will fit over the throttle body as well, and so would be usable on a stock engine, but I have not tested that.
Print in TPU with say 20% infill, and it will be nice and snug.
It's just a cover for a pipe, don't overthink it.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Mazda Miata / MX-5 (NB) Kit CardPrint and build your Miata / MX-5 NB! Rear wheels goes wrrrrr....
Mazda MX-5 NC Ducktail (Soft Top only)MX-5 NC Ducktail Spoiler Printing, Post-Processing & Installation Guide Important Notice This model requires post-processing to achieve a finished, automotive-quality result.
Mazda Miata Mx5 na Daisy Rim Turbofan !cosmetic!Mazda Miata MX-5 Daisy Rim – Wheel Hub Mounted Turbofan A cosmetic turbofan designed specifically for the Mazda Miata / MX-5 with Daisy wheels. This model is purely cosmetic.
MX5/ miata NC sunvisor sunglasses clipsunglasses clip that slides onto mx5/ miata sunvisor. I wouldnt reccomend using PLA as in summer it may deform with the heat
Mazda Miata / MX-5 (NB) Kit Card COMPLETE REDESIGN with hardtop and softtopPrint and build one of the best roadsters! Rear wheels goes wrrrrr....
MX-5 Miata NA/NB Alternate AC VentFully 3D Printed version of the eclipse vent mod for miatas. Fits NA/NB.
Miata Kenwood DPX Radio BezelMiata Radio Bezel for Kenwood DPX series and maybe other headunits Print from ABS or similar Pull the tombstone off and screw the bezel into the back of the tombstone Then push the radio into the bezel until the clips...
Mazda MX-5 ND miata - trunk lid handlePlease select a filament that is heat-resistant. What You'll Need M3 x 15mm Countersunk Head Screws Double-sided tape (recommended) Secure it with bolts through the holes on the side of the striker.
Modular Cupholder Mount (ND Miata, NF 124 Spider)Printing Instructions: Mount: flip 180° in slicer, supports, 30% infill Twist-lock male: 30% infill Cupholder: 10% infill Notes: Twist-lock male is intended to be press-fit on bottom of cupholder.
MX5 NC (Miata Mk3) Phone holder bracket - 17mm with screw holeThis is an improved version with an hole. Use an M3 x 30 screw and press-fit a M3x4 bushing on the opposite side to keep the screw in place.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.