MakerWorld
Modular Flatbed System for Redcat Ascent-18 Apex
- Creator (as listed at the source)
- Bill
- Licence
- Standard Digital File LicenseStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- RC
- Likes
- 10
- Downloads
- 20
Overview
A modular flatbed system designed for the Redcat Ascent-18 Apex using the factory body.
The bed and headache rack are separate, removable parts, allowing the different styles to be mixed and matched without reprinting the entire assembly.
Included files:
Plain flat-style bed
Read the full description
Horizontal plank-style bed
Vertical plank-style bed
Slotted headache rack
X-brace headache rack
The beds were designed to mount to the factory Apex body while maintaining clearance for the rear suspension and tires. The latest versions are slightly shorter than my original test prints for improved fit.
Recommended print setup:
0.4 mm nozzle
0.20 mm layer height
Four walls
15–25% infill
Print the beds vertically as oriented in the included Bambu Studio profile
Supports may be required depending on the selected part and printer settings
Assembly: Mount the headache rack to the bed using at least three M2 × 8 mm screws. Additional mounting holes are provided for alternate screw locations or a more secure attachment.
Installation: When installing the body, the rear of the cab may need to be bowed inward slightly to clear the headache rack. Once it passes the rack, slide the body forward and engage the factory front body mounts.
Fitment: This design has been tested with the factory Redcat Ascent-18 Apex body. Fitment with aftermarket or modified bodies may vary.
Notes: Fit may vary slightly depending on printer calibration, body placement, hardware, and vehicle modifications. Test-fit all parts before final assembly and confirm screw length before tightening.
Feedback: Feedback is welcome. Feel free to share photos of your print or suggest other bed, rack, or accessory ideas for future versions.
This is an unofficial fan-made accessory and is not affiliated with or endorsed by Redcat Racing.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
fms magnum exhaust pipeFMS Magnum Dual Vertical Exhaust Give your FMS Magnum a true semi-truck look with these dual vertical exhaust stacks !
Chevy Crawler V2This V2 is the same cab as 1969 Chevy Pickup V1 but instead of the truck bed I sized up the flatbed to work with this body.
1/10 Truck body ZIL 157
1/10 Scale MaxTrax MKII Traction Board1/10 Scale Traction boards * MaxTrax MKII traction boards for 1/10 scale crawlers * 145mm long X 42.5mm large X 6mm high * Optional * Clips to carry them on the body Comments, suggestions and tips are welcome !
GHST - Goodson's Hobbies Scaler Trailer
Flatbed for rc crawlerChanged the flatbed from Alexby's build, I'm new to the rc crawlers and trying to build it like my own personal truck. second file I made the stacks a little bigger, added the toolbox lid and welder.
1:10 Jeep Gladiator Interior setThis Interior set is designed for the JKRC Jepp Gladiator body. · 1:10 Jeep Gladiator 313mm · 1:10 Jeep Gladiator Honcho 313mm
1:10 2016 RAM 1500 Quad Cab 353mm1:10 2016 RAM 1500 Quad Cab RC body - wheelbase 353mm This Quad Cab version is based on the fully tested Single Cab model, which has been 3D printed, assembled, and mounted on an RC chassis.
1:10 Range Rover Classic Pickup 6x61:10 Range Rover Classic Pickup 6x6 Wheelbase: 324 + 130mm(trx6) This 6x6 version is based on the fully tested 4x4 model, which has been 3D printed, assembled, and mounted on an RC chassis.
1:10 Pinzgauer 712DK 6x6 Body1:10 Pinzgauer 712K Body 324+130mm - fits TRX6 This model has been fully tested — 3D printed, assembled, and mounted. You're getting a proven, real-world RC body. * Only the background was changed using AI. The vehicles are original.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.