Thingiverse
3-pin fan connector (molex)
- Creator (as listed at the source)
- jpnurro
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 216
Overview
The connector body for the 3-pin fan cable. This unit doesn't require any additional metal parts. Strip wire ends 5mm put them in to the holes (note the order) and bend them through the canals. The locking bar might require a bit force (depending cable size), press the end e.g. towards table (no tools needed). When the connector is it's place, the motherboard's connector body secures the assembly. Obviously the original connector with the tin parts is the superior solution. This unit should be used only for the secondary applications. (Tip: print locking bar 'B' the right side visible surface downwards to get better layer direction strengt)
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Motherboard Fan Mount Mk2 Collection - Creality K1 SeriesI designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was.
Creality K1 Max - Improved Motherboard Fan MountThis is an improved remix of Henlor model available here . 3 x M3x18 screws to fix support to motherboard 2 x M3x8 (or M3x10 or M3x12) screws fo fix fan on support 2 x M3x10 washers to keep fan on...
VORON 2.4 - CAN 'n More Connector Skirt (CNLINKO and EW LP12)Looking for a solution to reliably hookup CAN devices, fans, sensors and more to your beloved 🥰 VORON with a tiny bit of 😎 premium touch ?
Bambu A1 Active Colling Motherboard FanA simple fan interface for the Bambu A1 to support active cooling of the motherboard. While the model does fit the side of the A1, I used a small command strip (or double sided tape) to help hold it ins place during those “aggressive”...
Qidi Q2 moderboard cooling fan duct (V2)Using 6025 fan and this duct drop the XY drivers for 10-15°C V2: improved aiflow, better ballance between X and Y driver
Ender 3 Triple 4010 Radial Fan Mainboard CoverI upgraded my stepper motors, raised the current accordingly, and noticed that the heatsink on my BTT SKR Mini E3 V3 was running too hot to even touch.
Ender 3 mother board case
Qidi Xmax3 Noctua Motherboard fan remixAs mentioned this just supports mounting the noctua a12x25 120mm fan. I mounted mine on the outside from the inside using the supplied screws. I could have modeled a small hole in for the cable routing but am using a slot instead.
Ender 3 V2 / Pro motherboard cover for 80X25mm fan (no support)This is a remix of 'Ender 3 V2 & Pro Silent Motherboard' by TerraVestra Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. This cover houses 80x25mm fan.
Anet A8 Electronics Case (mainboard, octopi, step-down converter, relay and fan.)This is a remix/overhaul of a previous case for the Anet A8. i have cleaned up the cases mounting and other areas. changed the cable opening and moved a bit of the mounting locations.
Ender 3 V2 & Pro Silent Motherboard
Biqu B1 Motherboard Fan SilencerThis mod is designed for canceling noise. You need to remove bottom bolt which is under the fan. You can assemble it with stock bolt. Enjoy! Use 10% infill 0.2 Layer hight 0.8 wall thickness
Rialzo elettronica Creality3D CR-10S - Electronic uplift CR-10SRialzo elettronica Creality3D CR-10S per ventilazione e raffreddamento. -------------- Creality3D CR-10S electronic booster for ventilation and cooling.
3 Pin Fan connectorI made this to connect a old pc fan to my 3D printer, and actually worked... lol Had to use a 1.5mm drill to be able to insert the wires on the holes and push them with a plier. It wasnt very easy to connect it but after a wile I did It.
Parametric Electronics Panel Generator - OpenSCADBoost Me Thank You :) Parametric Electronics Panel Generator Create fully customized front panels for electronics projects directly in MakerWorld’s Parametric Model Maker.
Hose Connector | Magnetic | Duct Adapter | 100mm 4inchUsed magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters.
The Circuit CaddyPCB inspired desk organizer for pens and tech
CR-6 SE Motherboard and PSU Cover Set for 80mm FanThis is a set of replacement covers for the Creality CR-6 SE that allow the use of 80x80x25mm (8025) fans for the motherboard and power supply.
Computer Fan ConnectorsI needed a larger fan, and had some PC fans sitting in a box, so I made a small print that would allow me to connect them together to make a larger fan. I've currently only made up to a group of four.
Pin Connector for fan cover on FoldarapIn the last foldarap kit, I can't screw a fan cover on the fan due to short screw, so I've designed this pin (inspired by Emmett Lalish's pin connectors) the smallest design I've made :D
120mm fan connectorThis can be used to connect two 120mm fans together when case holes aren't available, such as on the side panel of NCase M1 EVO or M2
4" Duct Connector for 120mm Blower Fan120mm (4.72") Blower Fan to 4" (101.6mm) Duct Adapter This functional, high-airflow adapter seamlessly connects a standard 120mm x 120mm (4.72" x 4.72") blower / centrifugal fan to a standard 4" (101.6mm) ventilation duct or hose...
14x14 Fan Connector Rack 19A mounting connector designed to attach a row of three connected 140 × 140 mm fans to a standard 19-inch rack frame. Provides a secure and stable installation for a custom rack cooling system.
hovercraftRemote controlled hovercraft frame, fits E-flite mSR helicopter electronics. Works on water but the mSR board is not waterproof. Video of earlier prototype here: More to come soon!
Solenoid EngineReady for a in depth project? The engine runs at a high rate of speed, but gets to hot for PLA after 2-5 min. Id like to see someone make this made in ABS or a better power/solenoid setup for better heat tolerances.
PC Fan Push ConnectorInspired by this model: but actually holds with no fasteners or glue. Tested with Arctic P8 Max, but should work with most fans since they should have a standard footprint.
140mm Fan Array Connector Arctic P14 PRO 4-Way 4 Fan ConnectorIts a 4 way connector for the Arctic P14 PRO. When connecting a bigger grid you have to fidget them into place and "open" the fans away from each other in order to get the connector into place.
Connector reversed for "fan to 100mm duct with twist lock connection"A version for connecting inline to my laser exhaust
Hero Me Gen7 Platform Release4Hero Me Gen7.4 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across 3D printers, hot ends, extruders, ABLs, and other components.
Quick ConnectSymmetric universal connector for tubes, PTFE, Bowden or bracelets. (PLA might not work for long term use)
Delta-P fan duct V2-R2 for MK3S(+) extruderSomehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well.
Eds powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!!
Fan Guard for Prusa i3 MK3s - snapableDeleted rubbish. Added new version with much smaller mash - only 0.4mm thick - to pretend hitting the leadscrew at homing the x-carrige.
Bambu X1 Exhaust Muffler / Fan SilencerBambu X1C Exhaust Muffler / Fan Silencer Work in process. Updates will be posted below. Make the printer quieter by muffling the noise from the extremely loud rear exhaust fan.
K1 K1C Max - Wider and Quieter Aux Fan DuctWider Aux (Side) Fan Duct for more even and quieter cooling. Fits all K1 versions including K1C and Max -- I may make a larger Max specific one but want to get feedback on this first. Key Recommended Settings... MUST ENABLE...
Ender 3 V3 SE Lightweight Fan ShroudFan relocation shroud that uses stock 4010 fan. Better airflow and reduced weight.
Improved MK4 Fan DuctThis fan duct improves the air flow so the overhangs are better (up to 70º with very good quality, 3rd picture) I recommend to use Prusament PC Blend-Carbon Fiber or PA11-CF, because they are heat resistant and to reduce weight mainly, but...
PC4-M6x1.0 PTFE Tube ConnectorI designed this M6x1.0 PTFE Tube Connector for a ø4mm PTFE tube to be able to fit the *Filament Guide Arm M6X1
Modular Mesh Inserts for the Voron Fan GrilleThis is a set of mesh inserts and retainers to add some protection and (of course) a nicer look to your Voron printer.
Elegoo Neptune 4/Pro/Max/Plus Fan Shroud V5As I'm currently not really motivated to further redesign the fan shroud, I thought to add the last prototype I made. I think I'll finish it in the future, but not right now.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.