Printables
Qidi Plus4 Ultimate PEI Wiper
M3 Ultra Low Profile , i used 20mm length 4mm OD 3mm ID PTFE tube Short length !!!IMPORTANT!!! Despite being modeled from original Qidi CAD, I found that I had to sand the top and bottom surfaces for clearance.
- Creator (as listed at the source)
- ProtaDec
- Licence
- Creative Commons — Attribution — NoncommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- STEP STL
- Pricing
- Free
- Published
- Category
- Other Printer Parts & Upgrades
- Likes
- 3
- Downloads
- 7
Overview
BOM
Q.ty
M3 Ultra Low Profile , i used 20mm length
2x
4mm OD 3mm ID PTFE tube
Short length
!!!IMPORTANT!!! Despite being modeled from original Qidi CAD, I found that I had to sand the top and bottom surfaces for clearance. I prefer keeping the design as-is rather than taking away layers for it not to match CAD.
TIPS & NOTES:
The plastic parts of the holes are 2.8mm in diameter, you are meant to cut the PTFE tube to lengh (eyeballing it is enough), insert it, then pass a 3mm drillbit through. This ensures a smooth sliding surface for the bolts;
Don't immediately stick the PEI plate after installation. Place it on, and check that the nozzle comes in contact with the PEI and not the printed frame first. Best practice is to do this while the printer is warm and the nozzle is slightly dirty.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
QIDI Plus 4 Ultimate Door SealM3 BHCS any length as long as they reach the metal hinge (for mount-door) M3x25mm OR Ø3x25 M2.5 Shoulder Bolt (for hinge-mount) 4mm OD 3mm ID PTFE tube (for hinge-mount) Short length Ø1.5x25mm Dowel Pin (for...
QIDI X-Plus 4 FreeDi config files inkl. YouTube Tutorial Deutsch & EnglishHier ist das YouTube Tutorial auf deutsch zu finden // by using the english audio track you can watsch the Tutorial in the english language (automatically translated with an AI voice) Ich habe hier meine persönliche Config hochgeladen...
Silica gel desiccant enclosure for Qidi Combo box qidi q2, plus 4, maxLower the combo box moisture with this silica gel enclosure
Qidi Cutter V2.0, for X-Max 3/X-Plus 3, uses 9mm Snap-off bladesThis filament cutter was originally designed for the Qidi X-plus 3. Although I don't have an X Max 3, others have said it works perfectly. If you have the Smart 3 let me know if it fits.
Permanent Bed Platform Levelling Blocks for the Qidi Plus 4Designed to fit over the Z-stepper mounting bolts in the base of the print chamber (see photo). The model is a single piece. Print two of them.
Qidi Plus 4 Rear Chamber CoverThis is a simple print that allows you to cover the rear slot in the back of the chamber. This seals the chamber up even more and blocks the air coming from the mainboard chamber.
Qidi Plus 4 Phaetus Conch hot end air ductVariation on this model so it will fit the Phaetus Conch hot end.
Qidi Plus 4 Glass Riser VentThis is a glass riser with vent holes for the Qidi Plus 4 to help aid in cooling for materials like PLA, I printed this with supports for the overhang but mine have held up well for over a year printed in PLA.
gidi plus 4 pool holderI designed this spool holder so i can easily see how much is on my spools without leaning over the machine.
Qidi Q2 Toolhead Cover - Full body setsFixed and reuploaded ALL the models with clearance for the new filament sensor for the QIDI BOX. Also increased clearance of the part right below the filament cutter, to allow easier removal.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.