Thingiverse
DJI FPV GOGGLE CASE 3D PRINTED
- Creator (as listed at the source)
- carioxue
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 206
Overview
THIS IS FREE FOR FPV ,DJI GOGGLE, IF YOU USE IT,YOU WILL NOT REMOVE THE ANTENLER FROM THE GOGGLE EVERY TIME. SUGGEST TO PRINT IT IN PLA NOZEEL:1MM LAYER:0.6 THICKERNESS:2MM
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
DJI FPV FIN
5inch Deadcat "Neo" - 3d printable frame (+carbon rods) - flies amazing (tune & blackbox data attached)This is a new 5inch Deadcat design labeled "Neo". It was inspired by Anime, and is supposed to look like an aggressive spaceship or buggy type of vehicle.
DJI FPV Googles V2 Battery Holder
DJI FPV Battery Hub HolderThis is a Holder to hold the DJI FPV 3 Batteries and Hub.
Power Cable Holder DJI FPV Goggles V1 & V2TPU or other flexibel Fits for DJI FPV Goggles V1 & V2 Mount with factory screws Cable_Clip: The first Version. No edges rounded. Cable_Clip_smooth: 4 outer edges rounded. Cable_Clip_smooth2: 4 outer and top edges rounded.
Dji O4 Air Unit Pro autofocusАвтофокус необходим для точной фокусировки камеры на приборной панели а так-же элементах интерьера кабины (кокпита) авиамодели, что придает полетам особый интерес и эффект присутствия.
DJI Osmo Action 4/5 Pro Camera Mount/CaseDJI Osmo Action 4/5 Pro Camera Mount/Case This is a camera mount/partial case for the DJI Osmo Action 4/5 Pro with a GoPro-style attachment on the bottom.
DJI 04 Air lite plane mountremixed the camera housing to make a mount for a plane I use velcro to mount it to the plane The file uploaded is a newer version vs the picture I moved the antenna mount to the back left so you can rotate the board 90 degrees leaving...
Atomrc Penguin Single VTX Antenna MountI designed this thing to go with my o4 lite on my Atomrc Penguin plane. It should fit other antennas with a "shaft" diameter of 4mm. It is designed to fit the stock nose and vtx mounting plate.
Mini2 propellerPrint on any printer For mini2 , mini2se, mavic & moreSliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.