Printables
DuPont Wire Organizer - minimalist + small footprint
- Creator (as listed at the source)
- greenribbit
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STEP STL
- Pricing
- Free
- Published
- Category
- Organizers
- Likes
- 350
- Downloads
- 1,019
Overview
I wanted a way to keep my DuPont wires together and organized but wasn't a big fan of the big clunky comb-style organizers. So I made my own!
This organizer can hold about 20 to 22 wires at a time. The wires I have are about 195mm long (excluding the plastic connectors). Fully packet, the organizer has a foot print of roughly 25mm by 125 mm.
Keep in mind I print with a 0.8mm nozzle @ 0.4mm layer height. So, this model is optimized for that configuration. It should print fine if you use a different nozzle diameter and layer height, but no guarantees! You might want to take 's tip and scale the model 105% if you feel you'd like a bit more clearance.
There is a slight technique to inserting the wires into the organizer. Basically, hold the organizer in one hand, and press the wire against the slot with the thumb on that hand, while using your other hand to kind of “wind” the wire around the curve. I know, I know…trust me it is easier than it sounds and it keeps your wires nice and snug! Here is a video for reference:
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Stackable dupont/jumper wire holdersOrganizes for 100, 150, and 200 mm wires, seperates by color
Stone Wall Desk Set
Phone Pen Holder
Minimalist Desk Cable Organizer - Management RackTired of cable chaos? Tame the tangles with the DeskOrg, a minimal yet charming desktop cable management solution.
Cable KeepersKeep your loose cables tidy. Slicing Tips: Try to orient the main part so the first layer of bridging is as short a distance as possible. Orient the cable wrap part so there is no need for bridging.
Filament Shelf Brackets3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud.
Glasses StandVernier & Pen Desk Organiser by SD-3D | Download free STL model | Printables.com Watch Stand by SD-3D | Download free STL model | Printables.com
eyewear standThis is a stand for placing your glasses anywhere, such as on your desktop. It can also be used to display your favorite glasses. Print Settings Filament: Any Nozzle: 0.4mm Layer Height: 0.2mm or less
Fishing rod holderFishing rod holder. It holds up to 4 rods and is 22 cm tall. Wall mounted.
Modern table/Monitor standSmall table/monitor stand based on the FURTIF desk. Needs no supports, just print it on the angled side.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.