Printables
J1772 EV Charger Holder
- Creator (as listed at the source)
- Ken
- Licence
- Creative Commons — AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF GCODE
- Pricing
- Free
- Published
- Category
- Automotive
- Likes
- 296
- Downloads
- 2,826
Overview
J1772 Charger Holder. Slim profile - doesn't stick out from the wall too far. Mounting holes are aligned so that you can mount it to a single stud. Loop the extra cord over the top.
No supports needed as long as you print it on its side (as shown in the picture).
UPDATE 1: I made a “Larger” version of this model with two key improvements: 1. A larger notch as per the feedback from JVANHOU (thank you!). 2. I increased the distance between the port and the wall. I found that if I had the cord looped over the top, then often times I have to move the cord in order to get my hand around the J1772 to remove it. Hopefully this fixes that problem. I'll be printing/testing this out shortly.
UPDATE 2: I uploaded version 3, with an improved the length of the notch, which provides a better fit (latches on better). I also made other minor improvements. I highly recommend this version!
If you download the model, please do me a favor and hit the “LIKE” button too. Thanks!
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Remixed EV Charger Holder J1772 for smaller build platesA very very simple remix of Jerrari's EV Charger Holder J1772, to remove a few mm of size so that it will fit in 120mm^3. Will need to be diagonal on the build plate, no supports needed.
Hidden Dashboard Drawer for Tesla Model Y 2026Upgrade your Tesla Model Y (2026) with this sleek hidden dashboard drawer designed to fit neatly beneath the center display.
Tesla Model 3 Driver's Door J1772 Adapter Dock - Rear MountedThis is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation.
Tesla Model Y Driver's Door J1772 Adapter Dock - Rear MountedThis is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation.
Type 2 charging plug wall holderI was inspired by the design of Lindh3D 's “Type 2 cable holder”. But I didn't like the idea to print it with support. Also I thought it could be improved for less material use and better mounting.
Prusa Spool EV Type 2 Mennekes charger cable holderSimple holder for electric vehicle (EV) charger with Type 2 (Mennekes) connector. Connector is slightly tilted, holds in place safely. Prusa spool is used for holding the cable, which can be pretty heavy, depending on length.
PatchKart - The Ultimate Sub-Miniature Go-KartWow! What a cool and original idea!" - Some guy We designed this sub-miniature gokart some time ago after seeing countless power wheels races, drift trikes, chibi karts, and other DIY micro electric vehicles.
Modern Wire Nut Truck NutzWanted to do a play on the truck nuts for my new Ford Lightning EV. Dont use wire nuts anymore, so made a them from a more modern replacement. Latest version has drainage holes and uses a through bolt.
Rivian R2 rear driver cubby NACS adapter holderJust got a new Rivian R2, and I needed a place to store my Rivian shop provided J1772 to NACS and CCS1 to NACS adapters where they wouldn't rattle around and make noise.
NACS EV Charging Cable and Plug Holder REMIXI needed a space-efficient solution for storing my home EV charging setup which supports both J1772 (Kia Niro EV) & NACS (Ioniq 5).SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.