Pinshape
Open rc f1 Sand & Snow .
- Creator (as listed at the source)
- delukart
- Licence
- Creative Commons AttributionThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Not listed at the source.
- Category
- Not categorized at the source.
- Likes
- 15
- Downloads
- 217
Overview
Driving in deep sand or snow a problem?? Well not anymore with this new sand and snow setup. I designed a set of front ski's and skid bumper that will enable your front end to glide over sand and snow and still be able to steer. ski's use original wheel bearings. Next I slightly modified the existing Open R/C Formula 1 rear chassis created by Daniel Noree To except the new sand and snow paddle tires. They are designed to fit the original F1 rims or any of My race rims These new paddle tires will blast you across sand and snow with the greatest of ease. while shooting rooster tails like a mad man.. great for sand drag racing --Printing -- --ski's and bumper-- recommend --abs / petg / nylon layer height 0.20 infill -- 60% supports -- Yes. --Tires-- Recommend -- ninjaflex Layer height 0.25 speed -- 25 mm/s infill 15% triangular temp 220 retraction 1.00 retract speed 0.20 supports-- no
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Open rc formula 1 fully movable turret accessorythis is a two piece fully movable turret. That will eliminate any opponent on the track or in the office.!!
led Rally light accessory for open rc formula 1Want to race at night??? This is the solution.. This is a real working 3 piece led rally light for the open rc formula 1 car. I designed it for a 8mmx5mm led (image of the one i used is in the pictures above.
open rc formula 1 driver accessorythis is a simple race driver for your formula 1 open rc car.. uses a m3 screw to attach it threw the supplied hole in the cockpit..
LED police light rack for the open rc formula 1 carCop lights strobe test i designed this police light rack for added night racing fun... there are two racks one with accessory attachments and the other without.the frame is hollow to rout your wires.
Micro RC QuadCopterThis is my micro quad copter frame built for indoor flying. It has motor mounts for 8.5mm brushed motors and a space for wires and also the control board.
Open R/C F1 MadMax EdicionAre you ready for the apocalypse? if you're not prepared, with this update for your Open F1 you will be. This update is inspired by the vehicles in the movie Mad Max and It is the first version.
F1 MadMax V2 (For use with the original nose)At the request of some people, the front bumper is redesigned to be used with the original F1 nose. The upgrade kit consists of 5 parts: Front Bumper Set Mini-Explorer Fuel Tank Stand Rollbar Wheels All parts fit entirely in the Open R/C...
open rc f1 camaro body concept kit.Camaro Z28 hard body concept kit . This is an entire new body kit. takes place of the Open R/C F1 body . I also added a set of performance tires for wet pavement . And a set of race tires for dry pavement.
OpenRC F1 Front Suspension (Updated V2)
open rc f1 tribal flame body artI designed these tribal flames to spruce up the body of your open rc f1 car.
Rat Rod exhaust accessory for open rc formula 1 carplain and simple.. add some flare to your ride with this Rat Rod style exhaust system... layer height 0.20 infill 100% support from build plate only to support the pin.)
Open RC JoustingWhy not have a good old medieval jousting tournament in the modern age? Bridge the gap between old medieval jousting and RC cars and see who comes victorious in the kingdom!
DJI Inspire 1:9 hobby replicaFull DJI Inspire Clone with FPV mount and retractable landing gear. Assembly Video
Wing tip of RC airplane KRAGA KodoThis is right wing tip of 3D printed RC plane KRAGA Kodo. If you are able to print this part you should be able to print whole plane.
Open R/C F1 Bumper Car KitAs a child who is not loved to go to the fair and ride the bumper cars, for that reason I wanted to make an accessory for the Open R / C F1 and recreate that excitement of children.
OpenRC F1 Rear SuspensionAfter designing front suspension for Daniel's OpenRC F1 car I decided I had to come up with a way to make REAR suspension work. After several attempts I'm proud to say I've succeeded!
open rc f1 Air-ram fendersfront and rear air-ram fenders (with front&nose accessory body parts from openrc-f1-accessory-kit-by-danielnoree Installation-- Rear fenders.Remove the rear wing and rain light then slide the air ram fender on the frame fender has a clip...
AG Thumb Sticks (Taranis/Spektrum)The stock sticks on a radio (both the DX8 and Taranis) don't cut it for me. The biggest problem I have with them is that they are too thin and don't grip on my thumb and index finger. There are two types of pilots: thumbers and pinchers.
T.1154 transmitter assembly 1/5 scaleThis is a 1/5 scale T.1154 transmitter and receiver assembly. The airplane used as a template is a DH Mosquito. This particular assembly is found at the very back of the cockpit.
High-Speed UAV Landing Area Warning SignHigh-Speed UAV Landing Area Warning Sign A warning sign designed to alert people to a high-speed UAV landing area.
OpenRC TractorOne day like today in 1971 my father bought his first tractor. Today in its 45th anniversary, I proudly present my next project, the OpenRC tractor. It's an open source 1/10 scale replica of an original Ebro 160D tractor.
RS-01 Version C OpenRC F1 Adjustable Suspension Chassis
Katana Rc car 1:10 On/Off RoadCompletely designed from the beginning with the idea of making a full functional and time enduring RC car with solid components found on the internet.Works GREAT on road and off road and gives you the possibility to personalize all the...
Open RC Gatlin GunWhat’s better than an F1? An F1 with guns! Blow by your competition as you blow them away. Your F1 will now be complete. Circuit of the Americas tested. Formula One not approved. Cartridge size 20x 102 mm Caliber 20 mm.
Open RC LaserJust when you thought your F1 was complete What’s better than an F1 with a gun? An F1 with Lasers! Disintegrate the competition, since now most of the Open RCs have Gatlin Guns, you need something with a little more clout.
Sexy iPhone dockThis is a iPhone dock 3-D print sent to fine.![RC-CAR [ Only for android ], a preview image from Pinshape](/previews/pinshape/23912-0/card-aaa9201490800001.webp)
RC-CAR [ Only for android ]大家好 這是我的第一雙在野外工作 操作和實驗已經完成！ 請為樂趣！ 用戶菜單和應用鏈接： HTTP：// ...
Inductrix FrameAlternative frame for the Blade Inductrix indoor quadcopter. I made this design after having trouble finding a design that I could reliably print on my printer(s).
OpenRC F1 DRS systemI designed a DRS system for the OpenRC-F1 design contest. I tried to keep modifications to the minimum. I modified the rear wing and added a pin and an extra diffuser.
open rc f1 rear spoilersThis is a set of new rear spoilers for the open rc f1 car.. These spoilers (which ever one you choose will further stick the rear of the car to the track and look good doing it..
Formula-1 concept carInspired by the Ferrari F80 concept. If you have the Open-RC F1 car designed by DanielNoree and want to print my accessory pack, please upload a picture of your result. Leave a like if you like the design 😊 **Obs!
OpenRC Tire Mold for castable Rubber TiresThis is a 3D printable mold for casting your tires. Ninja Flex is expensive, and many extruders won't handle it, this is an alternative way of making your tires yourself.
open rc f1 racing rims packWhats a better way to customize your ride than a new set of rims here are 8 sets of custom rims for your Formula 1 car.. rims v4 and up were designed with two colors in mind.
OpenRC F1 Front Wing&NoseIdea taken from Ferrari F1 2017 concept. My suggestion is to print nose from hard material like PLA, ABS. Wing from flexible material. (I used flexible PLA)
RC _ Batmobile Add-on V.3Wanted to try something for the contest. I know its not great but I love batman and i know you do too. Will fix the pins soon.
Action camera mount OpenRC F1This is an action camera mount bracket for OpenR/C Formula 1 car designed for the OpenRC F1 accessory contest. I tried to keep it as simple as possible. I use a xiaomi yi action camera but it should fit any other action camera case.
Open R\C New Wheels (Rims & Tire)A new wheels (Rims & Tire) for Open R\C
OpenRC F1 Standard Rubber Tire AdaptersThese are 3D printed adapters to allow the mounting of standard R/C F1 tires on the wheels from the original design. After printing the included tires with both TPU and NinjaFlex I decided that it needed real tires.
OpenR/C Speed Boat AccessoryThis is my entry for the OpenR/C Accessory Design Contest . I designed some parts to transform this nice Formula 1 car (made by Daniel Noree into a speed boat .
open rc f1 exhaust.A nice looking exhaust accessory that fits into the original body to add a nice bit of detail to any formula 1 car. . layer height 0.20 supports yesSliSearch lists public model details and links to the original source. It does not host files or verify licences.