Thingiverse
2.5 inch SSD to 3.5 inch Hard Drive Bay Adapter Light
- Creator (as listed at the source)
- jaybeckr
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Gadgets
- Likes
- 103
Overview
Removed some material from the original SSD mount to lessen print time and materials required. Credit to owen for the original design and thanks for sharing Sketchup files! For a solid bottom version of this tray view the original. Bracket to mount a 2.5" Hard Drive or an SSD Hard Drive into a 3.5" hard drive bay
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Folder Drive
Xbox 360 Slim 2.5" HDD/SSD adapterAdapter that will let you use any 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug.
2.5" to 3.5" Drive Bay AdapterBrackets for mounting a 2.5" drive in a 3.5" bay. Made to fit the twist lock system in my NZXT Tempest case. Included Inventor part file if you need to change the spacing or hole tolerance.
Raspberry Pi 4 SSD CaseI created this case so I could easily attach an SSD to my Raspberry Pi 4. It's perfect for using the Raspberry Pi as a media center, a server, or a desktop PC. You will need M3 mounting screws to attach the SSD to the case.
2,5" to 3,5" SSD/HDD adapter
Storage box holder for 10x 2.5" HDD drivesHello, Sharing my project for a storage box for 10x 2.5" HDD drives. It's made to fit standard 7mm thick hard drives (100x70x7mm) - it won't fit thicker versions.
LABRAX 1U Quad 2.5″ HDD/SSD Rack MountA compact 10″ 1U rack shelf for up to four 2.5″ HDDs or SSDs . Print just the base for 2 drives, or add the snap-on top shelf to expand to 4 drives in the same 1U space .
HDD Adapter 3.2I was looking for an adapter to put my 2.5" SSD drive in a 3.5" HDD bay, and found several nice designs, but none that could be screwed in from underneath, so I made one with all modern holes.
5.25" bay to 2x 2.5" SSD slot adapterVery basic adapter to mount two 2.5" SSD drives in a common 5.25" drive bay. You can use the modifier mesh to remove top and bottom surfaces in those areas and save both time and filament.
2.5 inch SSD to 3.5 inch Hard Drive Bay AdaptorBracket to mount a 2.5" Hard Drive or an SSD Hard Drive into a 3.5" hard drive baySliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.