Printables
BUS BAR
- Creator (as listed at the source)
- Manuel Alvisi
- Licence
- Standard Digital File LicenseStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Electronics
- Likes
- 5
- Downloads
- 32
Overview
In the project I have created, you will find 3 different parts that you can print using the materials you prefer (PLA, PETG, etc.).
The Main body houses the distribution bar and the screws for securing the connectors, and allows the "entire assembled block" to be mounted to frames, walls, and panels using 4x16mm exagonal screws."
The 2 covers (one for + and one for -) gives protection to the wiring and are fixed to the main body with 2 M6 nuts
Extra Materials needed for realization are:
n°1 bar of steel or copper or any other conductor (100x12x1mm)
n°7 M6x16 (or 14) exagonal screws
n°7 M6 nuts and washers
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Bluetooth Speaker 2.0This is my second created bluetooth speaker. This speaker will replace our old radio at work. This time, I made it without battery's and sounds pretty good. All the red parts are printed with Ninjaflex for air tight enclosure.
Gopro Hero4 / Hero3 universal light ring / diffuser / supportThis is an easy and fully modifiable and universal light ring for water resistant gopro hero 4 and 3 case. To use it you have only to print it, attack on some leds strips, connect the strips and connect an external power source!
Air duster based on aliexpress 12v jetfanThis one is designed to use a 12v 3s Workpro screwdriver battery pack.
Schalter Halter GehäuseHier habe ich ein Gehäuse für meine Schalter erstellt. Zu kaufen bei Amazon: Gehen leicht rein nur Schrauben müsste man gucken ob die Passen da ich es verklebt habe.
SW3518 USB - B/C Charger mit HohlbuchseModell für SW3518 Amazon Link zum Bauteil: Wird bei mir für zum betreiben der DJI SDR Transmission mit 12V vom Boardnetz des Fahrzeugs verwendet.
PD Tester Trigger Board Case - CH224K 100WBoost Me Like this Case - Support with a Boost! Simple Case for a CH224K 100W PD Tester Trigger Board PD Tester Trigger Board 100W Tester Trigger Board Trigger Board 5V 9V 12V 15V 20V Amazon...
Caja para Fuente de 12V 5A
Fume Extractor - Adjustable speed | Easy to PrintPrint Recommendations: I recommend printing in PLA or PETG . I printed the black parts in PETG and the gray parts in PLA , if you'd like to use the same combination.
QIACHIP 433M Universal Relay CaseThis is a custom designed enclosure for the QIACHIP 433MHz Universal Wireless RF Relay Receiver (1-Channel) compatible with DC 6V, 12V, and 24V versions.
Box UPS 12v battery 21700 3sHousing for 3S1P 21700 batteries. UPS 12V for router or security camera. Petg manufacturing material. The UPS 12v board was purchased on Aliexpress.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.