Cults3D
Custom 3D printable Headlight Lower Trim / Eyebrow Panel engineered specifically for C. Rezzo / Tacuma / Vivant models (2004–2006). This model is a precise functional replacement for cracked, broken, or missing front headlight lower mouldings. Modeled to original mounting geometries, it restores the clean aesthetic of your front fascia at a fraction of the cost of OEM parts. Precise Fit: Engineered to match the front bumper and headlight curvature of 2004–2006 production years. Cost-Effective Repair: Eliminate expensive replacement searches for rare or discontinued body trim panels. Symmetrical Design: Includes the 3D file for one side. Simply use the Mirror function in your slicer software (PrusaSlicer, Cura, Bambu Studio, OrcaSlicer, etc.) to print the opposite side effortlessly.
Chosen by shared tags first, then category. Each one links to its own marketplace.
🚗 Volkswagen Caddy (2015–2020) Roof Rail End Cap / Cover Precision 3D replacement model for the longitudinal roof rail end cover, engineered directly from the factory original part for the VW Caddy (2015–2020 / 2K5 Facelift).
File types: 3MFLicence: Marketplace terms
Cults3DPaidWindow Stopper Tool A simple, printable Window Stopper tool! Print it, attach it to your window in seconds, place the stopper anywhere you like, and slowly close the window. It will remain open!
File types: STLLicence: Marketplace terms
MakerWorldFreeSuper Simple to print trays and holder. 1,2,4 compartment trays. Can & SD card for scale. Internal tray dimensions: 77mm x 55mm 38mm x 55mm x2 38mm x 27mm x4
File types: STLLicence: Attribution
ThingiverseFreeQuick Grip Trigger Clamp This is a fully functional Quick Grip Trigger Clamp. C-Clamps have become very popular prints but the clamp allows quick single hand adjustments.
File types: STLLicence: Personal use only
ThingiverseFreeThis is my approach for a mostly 3D-printed Wire Stripper — a functional and robust tool designed to strip wires cleanly and consistently.
File types: STL STPLicence: Personal use only
PrintablesFreeWhenever I get change, I usually end up throwing it into one of my car's cupholders and it never really gets used. It just sits there. So, I decided to design a coin organizer that would fit inside my car's cupholder.
File types: STLLicence: Attribution
ThingiverseFreeStorage Box V1 BOM: 1. Storage Box V1 BODY 2. Storage Box V1 LID 3. Storage Box V1 LATCH (X2) 4. M3 x 16mm (X2) EQUIPMENT: Design software: SOLIDWORKS Slicer: Bambu Studio (body & lid) / PrusaSlicer (latch) Printer: Bambu Lab P1S (body &...
Licence: Personal use only
Creality CloudFreeThe Pythagorean cup is a drinking vessel designed to drain its contents via siphon action if it is overfilled. If the cup is partially filled, it holds liquid which can be drunk in the usual fashion.
File types: SLDPRT STLLicence: Attribution
ThingiverseFreeStart a new project merging several skills in one task. This is my tank track robot controlled by a Raspberry Pi using a webservice. You can control the robot over dynamic website with webcam view.
File types: DXF STLLicence: Personal use only
ThingiverseFree!Inspire V1.5 Want a DJI Inspire One but don't want to spend $3K? Then this is the 3D printing project for you! The cost of building the frame and landing gear is only around $100.
File types: STL STPLicence: Personal use only
ThingiverseFreeSo this is something truly new. From now on everybody can print their own bicycle frame at home. With some SolidWorks skills you can also make your own customized version for best ergonomic.
File types: STLLicence: Attribution
ThingiverseFreeBetter Living with MakerBot, Episode 2 You probably all know this situation: You're supposed to ref a soccer game in less than 1/2 an hour and you cannot find your whistle. You're screwed!
File types: GCODE OBJ STLLicence: Personal use only
ThingiverseFreeMINI TRACK LOADER RC This is a Mini Track Loader RC like BobCat vehicle. Simple to print and simple to assemble, this Loader works with: ALL YOU NEED : - 3x "3.7g Micro Mini Servo : EU : - RX and TX EU : - Lipo 1s : EU : - some M3 screws...
File types: STLLicence: Attribution
ThingiverseFreePAROL6 is 6 axes desktop robotic arm. It is a robotic arm whose design approach is driven by real needs from a robotic education standpoint, small automation, and scaling from RnD to production.
File types: STLLicence: Personal use only
PrintablesFree*The Crossfire has now been updated, check it out here for the new and improved version This is my version of a 3D printed quadcopter. I designed it from the ground up for FPV, but it will work equally well as an aerobatic quad.
File types: STLLicence: Personal use only
ThingiverseFreeThere are two different kinds of lures here for you to land that next river monster! These are based on my adventures with small and large mouth bass and pike.
ThingiverseFreeThis is made ​​by using a 3D printer and a laser cutting machine at f.Labo in japan. The materials are ABS, acrylic3mm, double-sided tape.
ThingiverseFreeThis key is my first 3D object made with openscad. I chose this for two reasons. It's a nice object to learn how to work with openscad. And more important: I think every geek, hacker, technician want to have this tool in their toolbox!!!!
File types: SCAD STLLicence: Personal use only
ThingiverseFree3D printable kazoo instrument, just add wax paper! Just print, assemble the parts, add wax paper, and you're ready to hum.
ThingiverseFreeThe base includes bolts , nuts and washers of M2 - M48 . Separately models are placed in specific folders. All data collected in All_in_one.dwg file (autocad).
File types: DWG STLLicence: Attribution
PrintablesFreeDon't know about you, but I'm always losing the toothpick from my Victorinox Swiss Army Knife. OK, you can get a new one on eBay, but it's so much better to be able to print yours out in just a couple of minutes - and in your choice of...
File types: STLLicence: Attribution
ThingiverseFreeDid You ever try to paint big surface with spray-cans? Really hard job - kill Your fingers...but this equipment help to save Your fingers. Have a good painting!
File types: STLLicence: Attribution
ThingiverseFreeThe OpenRail™ system was created by Mark and Trish Carew of UPDATE V9.Zip added to include VSlot® Extrusion Framing System OpenBuilds™ Parts are now available in many easy to use and share formats!
File types: STLLicence: Attribution
ThingiverseFreeV-Slot Linear Actuators What are V-Slot Actuators? V-Slot linear actuators are modular building blocks for your machine ideas! OpenBuilds™ Parts are now available in many easy to use and share formats!
File types: STLLicence: Attribution
ThingiverseFreeNOTE: Currently being revised. Check back soon for update :) Bike frame mount for gopro. Hole for frame is elliptical, 35.5mm x 41.5mm. Bolt holes are to suit M3.
File types: STLLicence: Attribution
ThingiverseFree_ A video explaining the multitool: _ This is a multi-tool key chain I designed to be used while playing golf... It is part of a golf collection I've been designing. Below are the accompanying ball markers that go with this multi-tool...
File types: STLLicence: Attribution
ThingiverseFreeWall mount ping pong (table tenis) ball holder and dispenser that holds six ping pong balls. Tired of never being able to find your ping pong balls? Use this handy holder. Fill it up and when you grab the bottom ball, the rest slide down.
File types: SCAD STLLicence: Attribution
ThingiverseFreeYet another easy printable and usable mask. (Updated 03-26-2020. Add readme.txt and zipper edition) ===================================================== (---- Notice ----) Why will I not design this mask for printing in PLA or...
File types: SCAD STLLicence: Attribution
ThingiverseFreePractical handle for M6 screws – available in 12 different sizes. Ideal for workshop use, furniture,
File types: 3MF BGCODE STEP STLLicence: Personal use only
PrintablesFreeA double cardan type connector for coping with motor misalignment in CNC machines and 3D printers.
File types: SLDPRT STLLicence: Attribution
ThingiverseFreeHere is another of my fishing lure designs. This one is larger than my last ones but could be scaled up or down to suit your needs. The pivot allows for a more realistic swimming action when combined with the bill.
File types: STLLicence: Attribution
ThingiverseFreeCreate strong and long-lasting springs with these 3D-printed tools – perfect for your projects or the Wire Stripper Pro.
File types: STLLicence: Personal use only
PrintablesFreeI love to fish. I've always wanted to create my own lure ever since I was introduced to 3D printing about a year ago. I've finally found the time to put something together. This is my first lure design.
File types: STLLicence: Attribution
ThingiverseFreeThis is a sound moderator aka "silencer" for an airgun or paintball gun. Pump-up airguns in particular make a lot of noise as the air rushes out, and the moderator cotains a series of what are called "K Baffles" (see cutaway one in the...
File types: SCAD STL
ThingiverseFreePresented worm gear reducer with module 1.5 and 60x10 (6:1) teeth on driven gear and minimalistic frame that hold all details together. Also included motor adapter that I used to connect motor to worm part.
File types: SLDPRT STLLicence: Attribution
ThingiverseFreePETG R5-R40 corner router jig with puzzle joints, organizer rack, and bi-directional clamping slots.
File types: STLLicence: Personal use only
PrintablesFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
