Printables
Lack Stack
- Creator (as listed at the source)
- GBear
- Licence
- Creative Commons — AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- GCODE STL
- Pricing
- Free
- Published
- Category
- Accessories
- Likes
- 844
- Downloads
- 3,101
Overview
Most brackets for stacking IKEA Lack tables either require hardware or are not secure against forces in all directions. Typically they will prevent the leg of the upper table from sliding inward on the top of the lower table but, for forces trying to slide the leg outward, they must transfer the force up through the leg, across the tabletop, and down other legs resulting in significantly less resistance to these forces.
This two piece bracket resists forces in any horizontal direction for each leg. In addition it prints without supports and requires no hardware.
You will need four of each of the top and bottom pieces. Put the top piece on the leg of the top table upside-down from the way it was printed. Put the bottom piece on the leg of the bottom table in the same orientation that it was printed and slide it up on the leg until it engages and snaps into place with the top piece. I used PETG but PLA might also work.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
IKEA LACK reinforcementIKEA LACK table reinforcement in truss structure style
Height-Adjustable Extension Feet for Lack TablesHelps level your Lack-based 3D printing enclosure if your floor is as warped as mine!
IKEA SKADIS for IKEA LACK - 5 SIZES SKADIS MOUNTSAre you looking for a simple and effective way to organize your workspace? This project offers a solution for mounting IKEA SKÅDIS pegboards directly onto your IKEA LACK table or desk, turning unused space into a functional storage area.
Strong Lack BracketI wanted a stronger lack bracket.
Ikea Lack Table ReinforcementThe existing reinforcements aren't bad but ensure only that the Legs can't turn, with no support for actual stability or reduced shaking.
Spool HolderAll around best spool holder design that requires no support and mounts with common screws. It has been tested with a 1 kg spool and can be mounted in various positions.
IKEA Lack Enclosure (3 Variants, modular)This is an enclosure for 3D printers.
IKEA-LACK stack adaptersimple part to hold two IKEA-Lack tables stacked over one another. No bolting necessary.
Ikea Lack drawer hangers for Trofast storage binUse an Ikea Trofast storage bin as a drawer for a Lack table. These are drawer hangers for the Ikea Trofast storage bin. Designed to be mounted to the bottom of an Ikea Lack table using 5x60mm screws from Ikea Fixa screw and plug set.
IKEA Lack Power Supply MountI designed a power supply mount for the bottom side of my IKEA Lack enclosureSliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.