Thingiverse
1.9" Bead Locks for Axial SCX10
- Creator (as listed at the source)
- Anglesmith_Customs
- Licence
- Creative Commons - Attribution - Non-CommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Hobby
- Likes
- 321
Overview
EDIT 10/27/2019: All wheels have been updated with a smaller hub and now should fit stock axles better. These are various 1.9" bead lock designs that can be used with any RC that uses a 12mm axle nut. I recommend printing with a higher infill so they will be stronger and the screws used to hold on the ring do not strip out as easily. You will need to print one ring and one bead per wheel. The bead should be held on with M2x7mm screws. Either drill and tap the wheels or just run the screws straight in. Using PLA it's pretty easy just to run the screws in. The center hole may need to be drilled out slightly. If you find any issues, please feel free to let me know. Please do not sell my designs. Please post pics once you get yours mounted. Thanks for looking and downloading!
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
SCX10 Skid Plate. High Clearance, Flat BottomCenter skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly.
1/10 Axial Scx10 Rear BumperThis is a rear bumper for axial scx10 chassis, will fit without any modifications to the chassis. Hope you enjoy it!!
1.9" RC Beadlock Wheel - Vector Style
SCX10 HONCHO flat bed
1/10 Truck body ZIL 157
1/10 Scale Bumper Jack SCX10
Jeep AMC 4.0L I6 Engine & TransmissionThis is a replacement for the kit transmission of an Axial SCX10.2. It bolts to a stock skid plate. Motor mounts need to be added to mount it up front. It uses stock transmission internals.
Forklift Pallet Rack Lesu 1/14 Tamiya
Cantilever Suspension for Axial SCX10I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on your Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down.
Hitch Adapter for SCX10 II & TRX-4A mountplate for a trailer pin hitch. Both fit Axial SCX10 II & Traxxas TRX-4. TRX-4 spare tire might need to be removed to fit the same pin as i have or simply extend the arm.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.