Thingiverse
Ender 3 Magnetic Fan Mount
- Creator (as listed at the source)
- COZMIKDX
- Licence
- Creative Commons - Attribution - Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printer Parts
Overview
A very bare bones fan mount for my Ender 3 v1. This is made for 40mm x 20mm fans in the front and a 5015 part cooling fan. It uses 10 x 5 x 2mm rectangular rare earth magnets from amazon. As you can see, I did use a 3d pen to keep the duct against the 5015 blower fan. A bit where the duct touches the fan mount cap tab too just in case. You could use hot glue or super glue. The blue stuff on the posts going through the fan mount cap is left of blue tac from my previous mount. The duct is kind of funny looking. I'll have to make a new one some time. Onshape link below. Of course, this started out quick and messy, so I didn't much project clean up or good naming.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Ender 3 CR10S Hero Me Remix 3 For Basaraba Direct Drive UpgradeJan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix.
Satsana Ender 3 Fan Duct
MinV2 Ender 3 fan mountA fan mount that is very quick and easy to print and directs the air more effectively towards the nozzle.
Hero Me Remix 2 with Robust Assembly & Extended Wire ManagementJan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: 06\01\20 Uploaded 4010 fan ducts to fit new 2019 version fan.
Manta Compact Fan Duct & Tool Change SystemThere are newer versions of this thing here: Ender 3 & CR10 version Ender 5 version Background Although I really enjoy my Hydra Fan Duct design both my Ender 3 Pros have exclusively 4010 ducts with a Bowden system.
Satsana Ender-3 V2 Fan Duct XHere's the fan duct for the Ender-3 or the Ender-3 V2.
Satsana Dual 5015 Fan Duct for Ender 3 / CR-10This is a new totally redesigned version of my popular Satsana fan duct for the Ender 3 and other compatible printers.
The Box - Ender 3 Print head shroud system for Noctua NF-A4x20 and 5015 blower fanThe Box ====== Ender 3 Print head shroud system for Noctua NF-A4x20 and 5015 blower fan EDIT: Added main part without supports if you want to build your own support structure.
Ender 3 PSU Cover - 80 mm Silent FanEnder 3 Silent PSU - This is a 80mm fan holder replacement for the Ender 3 PSU 60mm. - With this project you can (optionaly) reduce the PSU noise a lot.
The Twin Turbofan - CR-10/Ender 3 Dual 5015 Fan Fang Mount (Stock Hotend)The Twin Turbofan is made to fit the stock CR-10/Ender 3 (MK8/MK10) hotend and the stock heat sink cooling fan.
AYF Minimal 5015 Duct V3AYF minimal duct for 5015 fan needs now M4 screw for 5015 fan rest M3 stock will work .step file uploaded for remixes March 2022 - Redesigned duct to incorporate CR touch ...on default Creality coordinates. no need to flash the firmware..
Uncle Bens Ender 3 & Ender 3 Pro Fang for 40mm Fans with BLTouch and Neopixel supportIntroduction: Remix of jckz82's fang and StevenMLawson's BLTouch mount plus an optional LED strip mount. The fang is kept in place by the two screws which go through the hotend. The pictures show the orientation to print in.![[Update: 2022.06.26] Ender 3 / Pro / v2 BIQU H2 Mount / 4010 & 5015 Fan Duct / BLTouch & CR Touch / Control Board Cover / Cable Management Kit, a preview image from Thingiverse](/previews/thingiverse/5410341-0/card-bd0625c3de3e0ab7.webp)
[Update: 2022.06.26] Ender 3 / Pro / v2 BIQU H2 Mount / 4010 & 5015 Fan Duct / BLTouch & CR Touch / Control Board Cover / Cable Management Kit
MinV2 Ender 3 fan mount - re-uploadBecause Thingiverse is such a fantastic website, the original upload of this design with 100.000+ views and 34.000+ downloads has been deleted on march 21 2020 for reasons unknown to me.
CR-10 / Ender 3 Dual 40mm Part Cooling Fan Ductinator + BltouchThis is the CR10 / Ender 3 part cooling fan from Madau3D. I added a mount for a BLTouch. M3 screw and nut required. Probe offset X 34 Y -57
5015 FAN MOUNT FOR ENDER 3This is a 5015 fan adapter for the ender 3. I designed it because I wanted to combine the original style of the ender 3 (keeping the aluminum hottend fan cover) with a more powerful layer fan.
Thanos 40mm fan guard40mm Thanos fan guard.
Ender 3 S1 Snap-on Gridfinity - Teardrop HolesA Gridfinity base that snaps on to the top bar of the Creality Ender 3 S1 and S1 Pro. Remixed from: This remix adds slightly larger, teardrop shaped magnet holes to the original model.
Ender 3 - Ender 3 Pro Side Mounted Spool HolderThere is a newer version of this thing which prints faster and is easier to assemble at this link: There is a Remix\Alternative Version of this thing here: Update:07\01\20 Uploaded a variation (E3_Spool Holder_V2) with extended fixing...
Snap-on LCD Cover for Creality Ender-3/Ender-3s/Ender-3 Pro/Ender-5A simple Ender series LCD Cover. No supports/glue needed. Printing orientation is as shown in the picture.
Ender-3 Z-motor spacer / support
CR-10 Heavy Duty customisable modular e3D V6 mount Volcano 5015 ABLCR-10 Heavy Duty Modular E3D V6 Mount I have started a Shapeways shop where you can get these parts printed. I have special versions of the V6 mount designed for Aluminium.
Ender 3 Tool Holder - 2.0!-------------------------------------------------------------------------------------------------------------------- | *Completely out of the way!* |...
Filament Guide for Ender 3 v2 / Pro / NEO / CR-X Pro (NO EXTRA NEEDED)
Ender 3 Raspberry Pi 2/3 mount (UPDATED V2)
Drag Chain - Cable Chain - Ender 3I wasn't happy with the drag chains that I printed before for my Ender 3, the hinges didn't feel nice, the print never looked good, then I decided to make my own version using different concepts.
Creality Ender-3 ButtonBox (for OctoPrint)SEE ALSO: Universal Buttonbox (for example for enclosures) Now also on Printables (Check it out if you are not familiar with Printables.
Belt Driven Ender 3/Pro/V2 and CR10Please visit my Github Page to get a better documentation of this mod! If you want to do me a favor and support my work, download this via my Printables Account , thanks!
Ender 3 - Ender 3 Pro Side Mounted Spool Holder V3Now compatible with the Ender 3 V2 This is a remix of my Side Mounted Spool Holder which prints faster and is easier to assemble. I have uploaded 2 variations they both effectively do the same job, one uses slightly less plastic.
Ender 3 (Pro) Spring Guides
Ender 3 Part Fan Duct RingI recently bought the Ender 3 printer and started tinker already before assembling the whole unit LOL this Fan Duct Ring fits nicely and has some certain gap to extruder side and nozzle tip side effect/result still pending but should work...
Ender-3 Cable ProtectorThis will smooth out the passage on the 20x40 frame underneath the bed where the cables sit to prevent them from rubbing on the sharp edges of the frame. Simple push fit design.
Ender 3 / 3 pro z lead screw speed knobKnob for the Z lead screw of the Creality Ender 3/Ender 3 Pro/CR-10 etc that has an 8mm diameter lead screw. Has a finger tip depression to enable fast "speed scrolling" of the Z lead screw to quickly traverse the Z range.
Creality Ender-3 station (LCD + Raspberry Pi)This is a station for using Raspberry Pi3 B+ with Creality Ender-3 (Octopi/Octoprint) and also to protect electronics of printer LCD.
Adjustable Feet (2") - for 4020 & 4040 extrusions
mini Satsana - A Compact Fan Duct for Creality PrintersPrintables What is this? mini Satsana is a remixed version of the very popular Satsana fan duct, which aims to reduce unnecessary weight and size. No supports are required, and there's clearance for the Micro Swiss Direct Drive kit.
Simple gantry support (metric/inch), Z-brace for Ender-3 V3 KE/SEThis gantry support eliminates wobble of the weak frame. It is designed for and tested on the Creality Ender-3 V3 KE. But users told me that the support also fits the SE model perfectly.
ENDER 3/ Ender 3 Pro/ Ender 3X TROUBLESHOOTING GUIDE AND HOW TO REQUEST HELPTHIS GUIDE IS MEANT TO BE FOR REFERENCE ONLY, AND NOT INTENDED TO SOLVE EVERY PROBLEM ONE MAY HAVE. I PERSONALLY CAN ONLY SOLVE ISSUES I HAVE EXPERIENCED OR ASSISTED OTHERS IN FIXING, BUT NOT ALL SIMILAR ISSUES WILL BE RESOLVED AS THE...
Ender 3 Extruder and Hotend Bullseye Duct Compatible Mounts
Ender 3 Screen CoverIf your like me and sometimes find the blue light of your printers screen annoying I have the solution for you. The cover fits easily into the screen casing and blocks the light coming from it.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.