Arduino Face Tracking Robot

What the marketplace statesThingiverse

Creator (as listed at the source)

DIY_Builder

Licence

Creative Commons - Attribution - Non-Commercial - Share AlikeStated at the source marketplace; SliSearch does not verify licences.

File types

STL

Pricing

Free

Published

September 24, 2020

Category

Hobby

Counts at the marketplace

Likes

650

Similar models

Chosen by shared tags first, then category. Each one links to its own marketplace.

Rover Tracks v2This is the second version of my Rover Tracks design. Many small issues were solved following the recommendations of the people that already built the first version of it.ThingiverseSTEP STLAttributionRemotely controlled - Arduino Self balancing robotB-robot EVO 2 : Extremely fast, stable and customizable self-balancing robot. Check the robot in action!ThingiverseSTLAttributionLaser pointer robot (Remotelly controlled + Arduino + Python control APP + EXTRAS)This is, a 2 axis (pan and tilt) Wi-Fi/internet remotely controlled robot. Completely OPEN SOURCE (all the design files and control code are fully available for everyone to modify or adapt it to its needs) and with a 3D printed frame.ThingiverseSTLAttributionSphere PainterThis is an Eggbot derivative that is a remix of the Egg Painter Mini by Thingiverse user Provlax . I have currently been using it for decorating Christmas ornaments like the one in the picture above.ThingiverseSTLAttributionFPV-Rover V1.31 (Tank)This is a remix version of the FPV-Rover V1.21 and FPV-Rover with increased clearance, raised front gear and reinforced hull.ThingiverseSTEP STLAttributionModular Rover Tracks[UPDATE: I've been working on an improved (and compatible) version of this rover tracks, if you are planning to build this, please check the newer version first at This is a self-contained 3D printable rover track that can be reused on...ThingiverseSTLAttributionOmniforma(3-!diotz)Most hobby and even many practical robots are built for a single fixed task —a line follower follows lines, a robotic arm picks objects in one setup, a surveillance bot only monitors.PrintablesSTEP STLPersonal use onlyProtoTankThis thing has been replaced by this A bolt together modular tank style robotics platform! I use this with my students. They get the base kit, then they customise.ThingiverseSTLAttributionServo driven tracked rover w/suspensions (self tightning belts).3d printed tracked rover from Lynlim Nesneros on Vimeo . There are ment to be glued on some rubber square`s at the flat side of the tracks You need: Filament Glue Self tapping screws with a wide head M5 screws (do not use any countersink...ThingiverseSTLPublic domainMR - 4 : Robotic TankMy latest tankbot has been designed to be a larger vehicle but printable on a small scale printer. A number of issues with the other tanks have been overcome (hopefully) with this one.ThingiverseSTLAttribution3D-printable High torque servo/gear reductionThingiverseDXF STLPersonal use onlyrobot hand || bionic hand prosthesis prototypeThingiverseSTLPersonal use onlyRover platformThis a rover platform that you can assemble choosing among many blocks that fit in the same mounting points, so you can adapt the design to what ever fits your needs the better.ThingiverseSTLAttributionTito biped robotWho is Tito? =============== Walker and dancer DIY biped robot, derivative design from Zowi which is based on BOB the original biped robot that uses only 4 servos to walk and move.ThingiverseSTLAttributionRobotic Hand EPS 2018 mechanic bionic robotOn going Project ARDUINO CODE is available ! This is the design I reached at the end of a school project in Romania. Special thanks to Diana Popescu. Specs: Human sized robotic hand (sized and designed following measurments on y own hand).ThingiverseSTLPersonal use onlyFPV-Rover V1.21 (Tank)This is a remix version of the FPV-Rover with increased clearance and reinforced hull. (you can see my other Rover modifications FPV-Rover V1.31 and FPV-Rover V2.31 Print 2 body parts, glue them together and tighten them with 4 studs!ThingiverseSTLPersonal use onlyForklift module for SMARSThingiverseSTLPersonal use onlyQuadruped IIPrintable Quadruped Robot Step by Step assembly instruction. With codePrintablesSTLEasy Robot Arm (SG90 servos & now steppers too) UPDATED 03/21Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it…PrintablesF3D STEP STLPersonal use onlyOpen Source Mobile Robotic Manipulator V1Here you will be able to find the CAD files for an Open-Source Mobile Robotic Platform I developed. It has a 4-wheel drive and a robot arm with 5 degrees of freedom on top.PrintablesF3D STEPShare the sourcePrecision 130 DC Motor Mount (20mm x 15mm)Precision 130 DC Motor Mount / Holder (20mm x 15mm) A simple, robust, and low-profile mounting bracket specifically designed for standard class 130 DC motors (commonly used in RC toys, mini 4WD cars, and small...Printables3MF STLPersonal use onlySegwayRC (Arduino Nano) - Self-Balancing RC RobotSelf-Balancing RC Robot — SegwayRC 💻 Firmware & source code: A fully documented, radio-controlled two-wheel self-balancing robot.MakerWorldSTPPersonal use onlyCompact Arduino Robot ChassisA compact chassis for an Arduino (uno) robot using DC motor driver, with mounting screw holes for members of the free arduino/raspberry pi robot course at Should not require supports apart from on the version with the example...MakerWorldSTLAttributionSpotmicro - robot dogI designed Spotmicro inspired by the Spotmini of Boston Dynamics. It works on the basis of the Arduino mega, and if you use a different board, you have to redesign the 'plate' file yourself and print the 'non-mega' file instead of the...ThingiverseSTLAttributionSpherical Parallel ManipulatorThingiverseSTLPersonal use onlyMini RoverI built this small prototype to test several concepts: the tracks made from O-rings, a simple robotic claw, and wireless communications with Arduino.ThingiverseSTLAttributionrobotic lawn mower - alternative motorsIn some countrys it is difficult to get the motors for the 3d printed robotic lawn mower from I tested alternative motors for the drive system and for the cutting device.ThingiverseSTLPersonal use onlySOLAR TRACKERlIf you have made this thing, PLEASE take pictures and post! Thanks. Hello. because I can not get to know the same language first. I know little about english language ... :) I have inspired this project from another user.ThingiverseSTLPersonal use onlyTitanTitan A RC-controlled quadruped with Tracks. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs, code archives, or...ThingiverseSTLPersonal use onlyESP32 quadruped robot (laser cut+3d)ThingiverseSTLAttributionHoverboard Motor Robot WheelThis is a wheel designed to fit hoverboard hub motors. It replaces the solid rubber tire designed for asphalt with a wheel more suitable for grass / sand / dirt. I plan on using it with a robotic lawnmower project.ThingiverseSTLAttributionSmart Robot Cerbero CAR (Arduino)Leggere relazione allegata (Read attached report) date un'occhiata anche alla versione per la gara: Lo scopo di questa prova è di progettare e realizzare un robot capace di muoversi autonomamente alla ricerca di sorgenti luminose collocate...ThingiverseSTLPersonal use onlyHavoc F v5This is the latest version of my flipper battlebot: Havoc F. I designed it in Onshape and 3D printed the chassis in two materials, TPU and PETG-CF on my Bambu Lab P1S. What's new: The most important change is the scoop.ThingiverseSTEP STLPersonal use onlyRobotic arm 3 DOF V1The robot uses three 5V 28byj-48 stepper motors, one for each degree of freedom. The gripper is made for 20x20x20 XYZ calibration cubes The SG90 is used for the two finger gripper.ThingiverseSTLPersonal use onlyDancing Skeleton - Wind up and motor versions includedThis is a Dancing Skeleton, approx 10-12" high. Wind up and motor versions are possible. (Wind up version could be scaled to a different size, probably.ThingiverseSTLAttributionROS Differential Drive Robot with printed Gearbox and WheelencoderThingiverseRotary bearings 200mm---> 608ZTrying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone.PrintablesSLDPRT STL STPPersonal use onlyPNX CHG-3617 – 36:1 Compound Helical Gearbox for NEMA 17PNX CHG-3617 — 36:1 FDM Compound Planetary Gearbox for Robot Joints Project Overview PNX CHG-3617 is a 36:1 FDM compound planetary gearbox for robot joints, designed to mount directly to a NEMA17 stepper...PrintablesSTEPPersonal use onlyServo Linear Actuator – Rack and Pinion MechanismModelo de actuador lineal accionado por servo motor, basado en un mecanismo de piñón y cremallera (rack and pinion).Cults3DMarketplace termsHighly Configurable Wheel (One Wheel To Rule Them All)Thingiverse

SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.

Report this model