Treatstock
Flexible Tube POC
Testing the Nylon: I was getting nice flow at 230 C but layers where not bonding together good enough. The test in the pictures was made at 254 C which "I suspect" is far, and I mean far, too much. The part breaks quite easily.
- Creator (as listed at the source)
- Not listed at the source.
- Licence
- Personal use onlyThe marketplace states no licence. SliSearch shows the most restrictive assumption; check the source page before you use the model.
- File types
- The marketplace does not list the file types.
- Pricing
- Free
- Published
- Not listed at the source.
- Category
- 3D Printer Accessories
Overview
hing...
Testing the Nylon:
I was getting nice flow at 230 C but layers where not bonding together good enough. The test in the pictures was made at 254 C which "I suspect" is far, and I mean far, too much. The part breaks quite easily. I also slow it down to 20mm/s. Layer height was set to 0.15mm. I'm thinking in trying again even slower, with a 0.5mm nozzle (that's gonna be difficult) and with a fat profile that lays down way too much material... we'll see...
More about testing the Nylon:
I have been reading about different ways to get the print stick to the build platform, the quickest I could try this morning was the "hairspray" solution but I though I would rather use some other spray... Glue spray! Looks like it works quite fine however...
It's such a dirty thing: I made a "window" in a large sheet of paper (DIN A3) to keep the printer clean, be careful !
Other tests
As I mentioned, I have been printing things like this using ABS and PLA, using active cooling for the PLA, the resulting parts look very nice however, and as expected, they are very easy to break!....
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
1.75mm Filament ClipSmall clip that snap on to spools and holds the end of the filament to prevent it from unraveling. There are several versions, should work with spools from the following suppliers (at least in 2013): added 2013: * Octave* * Up!* *...
Ender 3 Cable Chain
Baby GrootHello, my version of baby Groot from the upcoming blockbuster movie "Guardians of the Galaxy 2". The model resembles the baby groots appearance in the trailers of the movie.
Baby Yoda - Free SampleJoin our facebook page to get further updates and to be notified first when changes or activity happens!
T-nut M3 drop-in rotating V-Slot
2020 / Ender 3 Filament GuideSnap In Guide, Many to choose from! The Base Will fit tight but should not need any trimming, tested at a few resolutions. Once its in the aluminum just click your guide in and call it a day.
Parametric pulley - lots of tooth profilesThis thing will create a range of metric and imperial tooth profile pulleys, with any number of teeth, specified in the Openscad file. Tooth profiles currently supported are: profile == 1 for MXL profile == 2 for 40 D.P.
TUSH - The Ultimate Spool HolderIntroducing TUSH - The Ultimate Spool Holder v.2. I was using a regular spool holder. Not the most convenient design, if you ask me, because It takes some time to replace the roll.
Bag Clip with Screw Capnew version! - I was trying to make a normal bag clip a bit more practical, so I don't have to take it off every time and just have to unscrew the cap.
Corner Brackets For System20 2020 / 2040 ExtrusionThese are corner brackets designed to suit System 2020 (2020/2040) extrusion. They can be used to build or strengthen/reinforce 3D printer frames and to assist in vibration isolation of vertical frame components such as the Z axis...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.