Printables
Temporary HF Telescopic Whip Antenna Mount
- Creator (as listed at the source)
- Murder Hornet
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Electronics
- Likes
- 1
- Downloads
- 10
Overview
This lets you support a HF whip antenna to a deck railing or other structure.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Red Antenna BaseThis is a printable body to build your own base for the common "red base" antennas sold an Amazon and Ali Express. They work great, but the hardware rusts.
Portable Ham Radio Hex Antenna Center Hub for 20m to 6m3D printed center hub for a portable ham radio hex antenna, designed for telescopic poles and field use from 20m to 6m.
K6ARK Wire Antenna WinderUnable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one.
Quansheng K5/K6 Stand (stable base)Stable base for Quansheng UV-K5 & UV-K6 radio. Base pour radio Quansheng UV-K5 & UV-K6.
Xiegu G106 Desk MountA simple angled bracket for the Xiegu G106 HF radio to sit on your desk top. you will require the correct mounting screws.
Hanging Solar Node - for use with Meshtastic and Meshcore LoRa DevicesThis enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or desire to...
Tripod for ground stake vertical ham antennasAdd a tripod to a ground spike vertical ham antenna. This allows use on difficult surfaces such as rocky soil, frozen ground or paved surfaces. It also allows use in parks which prohibit disturbing the ground.
Xiegu X6200 Pouch InsertSmall insert for an amazon tool pouch for the Xiegu X6200 Radio. Theres an attached pdf with instructions. If you want it done exactly like pictured, you will need the following.
NanoVNA H4 Hard CaseThe NanoVNA slides in from the end and snaps into place. Accommodates BNC connectors up to 23mm long. Includes a holder for the stylus. I printed it with 4 walls and 25% gyroid infill because I like overkill.
Tripod to convert ground spike ham vertical antenna to POTA PerformerThe build consists of a spike mount telescopic 5.7M antenna and feed point and the tripod made from 3d printed parts and one inch or 32mm PVC pipe.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.