Printables
Customizable Bushings, Spacers & Washers — Any Size (Parametric)
- Creator (as listed at the source)
- MarineLab3D
- Licence
- Creative Commons — Attribution — Noncommercial — NoDerivativesStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Tools
- Downloads
- 4
Overview
Print bushings, spacers and washers in the exact size you need, instead of hunting for the right off-the-shelf part. This is the standard set covering common marine sizes. Need a bushing sized to YOUR bolt, shaft or hole? Generate a free custom STL at marinelab3d.com — set inner Ø, outer Ø and length in 0.5 mm steps. Perfect for engine bays, rigging, deck hardware and quick repairs on board.
Print settings: PETG or ASA for UV/heat resistance (Nylon or CF-Nylon for load-bearing spacers). 3–4 walls, 40–60% infill, 0.2 mm layers, no supports.
-> Customize this part FREE (any size) at MarineLab3D:
More 3D-printable boat parts:
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Boat Winch Key & Deck / Tank Cap Key — Custom Fit (Parametric)Lost the key to your water or fuel deck filler, or your winch? Print a replacement that actually fits.
Custom Flat Mounting Plate — Countersunk Holes, Rounded Edges (Parametric)A backing / mounting plate in any size, with countersunk holes exactly where you want them and neatly rounded edges. Print the default or design yours free at marinelab3d.com .
BSP Blanking Plug & Threaded Cap — G1/8 to G2 (Parametric)Threaded blanking plugs and caps to seal unused BSP ports on pumps, manifolds and fittings. Pick your thread size — the default is a common G size, and any BSP size can be generated free at marinelab3d.com .
Custom O-Ring & Gasket — Round, Square or Rectangular (Parametric)Flexible O-rings and gaskets in the exact cross-section and diameter you need — round, square or rectangular. This default fits common sizes; make yours free at marinelab3d.com .
Caulk / Silicone Nozzle — Bendable up to 160°, Cuttable Tip (fully parametric)Every caulk nozzle in the box is straight, too short, and the hole is in the wrong place. So I drew one you can bend, cut, and actually screw on.
Snap-Clip Cross Bar — Tool-Free Rail Mount (Parametric)A cross bar with two integrated C-clips that snap straight onto a rail — no screws, no tools. The base for modular deck and cabin kits. Size it to your rail free at marinelab3d.com . Print settings: PETG for the best snap.
Twin Pipe-Clamp Cross Bar — Rail-Mount Base for Modular Kits (Parametric)A rail-mount cross bar that clamps onto tube or rail — the building block for modular holders and organizers on board.
Silicone Smoothing Spatula — Tapered Sealant Tool (Parametric)A tapered spatula for smoothing sealant and caulk beads to a clean, professional finish. Print the default, or size it to your bead width free at marinelab3d.com .
Push-in Screw & Hole Cover Caps — Any Diameter (Parametric)Snap-in caps that hide screw heads and cover open holes in trim, panels and cabin furniture for a clean finish. This pack covers common diameters. Need an exact fit?
Halyard Stopper Ball — Clean Rope Stopper (Parametric)A slide-on stopper ball for halyards and control lines — a neat, snag-free alternative to a bulky stopper knot. The default fits common line sizes; match your line Ø free at marinelab3d.com .SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.