MakerWorld
7" Pitch Trolling Motor Prop
- Creator (as listed at the source)
- EastOut
- Licence
- Standard Digital File LicenseStated at the source marketplace; SliSearch does not verify licences.
- File types
- STEP
- Pricing
- Free
- Published
- Category
- Vehicles
- Likes
- 2
- Downloads
- 11
Overview
I built a mount for my paddleboard to use a Minn Kota Edura C2 40lbs trolling motor, using the stock propeller I was only pulling 35 amps and topping out at 4.5 mph. I decided to print a 7" pitch prop and try to get the paddleboard up on plane. This propeller had similar performance in amp draw and speed for the first 3 power levels but for 4 and 5 it gets faster and more energy intensive, the paddleboard went 5.6 mph peaking at 50 amps.
It was fun to play with, please use a fuse on your motor if you plan to test this. it would probably work better on the 50lb thrust motor.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
MINN KOTA Trolling Motor Propeller BladeI build faster, more agressive propeller for minn kota trolling motors (my is minn kota 50lbs, can be installed on other models. That is first version of it. After tests I add a more pictures there.
Fully 3D Printed 1/10 Airboat with 6in 3D printed prop.(Future updates still coming) WIP The Airboat setup file is for orca slicer including all the models on different plates.
RC Boat PropellerPrinting this as replacement prop for Harbor Freight RC Neptune boat. I really have no idea about RC boats, or propellers, I just eyeballed the plastic ones that came with the boat and modeled it in...
RC Boat Propeller 3 Blade d=4mm D=40mm P=50mm DriveDogHerewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 40mm Bore diameter: 4mm Height: 15mm Type: DriveDog 3,7mm
RC Boat Propeller 3 Blade d=4mm D=45mm P=50mm DriveDogHerewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 45mm Bore diameter: 4mm Height: 19mm Type: DriveDog 3,7mm
RC Boat 45mm TPU prop guardRemixed to fit 45mm props, specifically sized or a 4519 prop
FPV Motor Bell Gripper (TPU), 28xx motorsTightening M5 nyloc nuts on large FPV drone motors can be a pain. The motor bell spins, and trying to hold it by hand often leads to cut fingers or a slipping grip.
Water Jet DriveReneeCelDesigns Water Jet is finally available for FREE DOWNLOAD!!! As seen on youtube! This water jet propulsion unit is fast, powerful, and on tests, using a HobbyWing 2045Kv motor with 150amp 11.1v Lipo....
rc airplane Dart-1
PropellerScale-able Boat Propellers. 4 blade and 3 blade versions. Shaft hole omitted so that you can edit in what you need.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.