Printables
MFJ-267 Meter Retention Bracket
- Creator (as listed at the source)
- David Witkowski
- Licence
- Creative Commons — Attribution — NoncommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF GCODE
- Pricing
- Free
- Published
- Category
- Electronics
- Downloads
- 2
Overview
The meter on an MFJ-267 Watt Meter and Dummy Load is held in place by a custom nylon retention bracket. If the unit is dropped, the bracket can break. This part replaces the OEM retention bracket.
My repair part allows the reuse of the factory screws if printed (in PrusaSlicer) with a 10 mm solid bottom layer as follows:
Horizontal shells Minimum shell thickness: Bottom: 10 mm Alternatively, you could try increasing Perimeters.
Install the bracket with the embossed arrow pointing at the meter's back side.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
HP Server Power Supply Case.Embellish, protect and reduce the sheet metal look of your modified HP server power supply with this minimalist enclosure. Includes on/off 'start' switch, voltmeter and bail stand. Fits around the standard server PSUs.
Yaesu FT-7800 Remote Face Mount
Case for Common Morse Code Trainer PCB GehäuseDies ist ein einfaches, aber effektives Gehäuse für eine sehr gängige Morsecode-Trainer-Platine (oft als "Morse Code Trainer Card Pro" oder ähnlich bezeichnet).
zBitx V2 - RCA Jack Antenna Plug CoverI've heard a couple YouTubers comment that you need to be careful of the long wire antenna jack (female RCA jack) because of high voltage.
POTA Mast Hitch MountThis hitch mount holds a paint pole to use as a vertical mast for POTA and fits a standard class 3 hitch receiver.
Wire Winder for Ham Radio, POTAQuick and easy wire winders for POTA antenna elements.
Repair Buckle All VersionsA buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG.
Hanging Solar Node - for use with Meshtastic and Meshcore LoRa DevicesThis enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or desire to...
Housing for (tr)uSDX QRP TransceiverThese are the housing files for the (tr)uSDX Radio. Print in PETG / 0,15mm Layer Height / 20-25% Infill Tap (cut M3 Threads) into upper/lower Wall before putting inScrews.
2M (144MHz) Pocket Moxon Ham RadioVideo of build instructions Note: I printed in PLA with 50% infill. I tried once printing in PETG 50% infill but the material was too soft when using a strong band and the frame warped.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.