Thingiverse
E3D V6 40mm Fan Mount
- Creator (as listed at the source)
- 13DjjC13
- Licence
- Creative Commons - Attribution - Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- SLDPRT STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 613
Overview
This is a 40mm fan mount for the E3D V6 hotend. The fan is angled to enable it to fit into a tighter vertical space. There are 2 different STL files. The 32mm hole spacing is for a standard 40mm PC cooling fan. The 35mm hole spacing is for fans i purchased on Ebay. V2 MODELS HAVE SLIGHTLY LONGER ZIP TIE POINTS.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Prusa i3 MK2 Upgrade kit for E3D Titan Extruder by S±E
Regulable fan duct Jonas extruder 40mm (Budasch, E3D, CAT...)Fan duct for Jonas extruder and Budasch, E3D, CAT, etc., hotend.
E3d V6 Valcano center piece for dual duct fansremixed this from all credit go to trustfm. i edited the center piece to work with e3d v6 volcano hot end. you need: 1pcs 30mm fans 2pcs 40mm fans 4pcs m3x25mm bolt & nuts (i only use 2 bolt)
modular hotend bowden mount incl. fan duct and lightMy design of a modular hotend bowden mount. The Hotend is very easy removable. It is enough space left for an auto-bed-leveling sensor or any upgrades. You need: 1. variant 3x 30mm fans 2.
*UPDATED* semi-removable 2-in-1 fan duct*New version featuring m3 screw holes to mount the parts cooling section more securely, and improved fit* *Added V2.1 which has a -0.3mm tolerance incase V2.0 is too tight* I wanted to be able to choose whether I wanted parts cooling or...
Piggyback layercooling fanduct for e3d-v6 hotendThis fan duct is designed to mount 30mm layercooling fans directly onto the stock e3d-v6 fan duct that clips onto the heatsink. Mirror the part if you want dual layercooling fans. edit: added source files in SW2015 and STEP.
E3D V6 | Fan Duct
E3D V6 40mm Triple Fan Blower DuctThis is a triple 40mm fan duct for E3D V6 style hot-ends. It is designed to snap around the V6 heat sink and has provisions for a 30mm long M3 screw, nut and washers for extra clamping.
E3D 40x40 Fan Duct
E3D V6 mount with 40mm fan for CR-10This is a combined hot end and fan mount I designed for an E3D V6 hot end on the Creality CR-10. I also made sure this will work with the 50mm fang bracket: I used nylon standoffs to get the part cooler in the correct position with the...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.