This is a remix of the great Raspberry Pi Case Top of Malolo . We've had a good cooperation over the last few days and have worked on the design and new ideas to make the case even better.
File types: STLLicence: Personal use only
ThingiverseFree
Printables
orange pi 5 plus case with 40mm fan
- Creator (as listed at the source)
- Malo Fargeas
- Licence
- Creative Commons — Attribution — Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STEP
- Pricing
- Free
- Published
- Category
- Computers
Overview
remix model, i use 2 noctuaa NF A4x20 overkill to cool the orange honnestly.
printed on a ratrig V core 4 with PCTG
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
ThingiverseFree
Case for an Orange Pi RV2 SBC. Simple case with all openings that is needed outside the box. To mount, use 2mm screws
File types: STEPLicence: Personal use only
MakerWorldFree
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake.
File types: 3MF GCODE STLLicence: Personal use only
PrintablesFree
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need...
File types: GCODE STLLicence: Personal use only
PrintablesFree
The ICECASE SLIM Pi 5 is a cutting-edge slim case tailored for the Raspberry Pi 5, housing a premium Noctua 4010 5V fan.
File types: 3MF STLLicence: Personal use only
PrintablesFree
2U 10" rack Mini-ITX remix — 240mm depth, ATX passthrough, dual Noctua 60mm intakes, cable passthrough & rack handles.
File types: STEPLicence: Attribution
PrintablesFree
This is a Mac Pro 2019/2023 model style case for an orange pi zero 2w, might work with a raspberry pi but ymmv
File types: STLLicence: Attribution
PrintablesFree
I made this adapter for an aluminum cooling case for Raspberry Pi 4 that I ordered from AliExpress. The original case uses two small 25 mm fans, but I found them too loud for everyday use.
File types: STLLicence: Personal use only
PrintablesFree
For fitting into a small 3d printed case I chose to redesign the mounting for the cooler mount that I had created and with the mount in place the Noctua cooler sits on the die a lot better and when stress testing the temps never went above...
File types: 3MFLicence: Personal use only
PrintablesFree
// Orange Pi PC case orangePI PC+ sudo nano /boot/armbianEnv.txt overlays=spi-spidev param_spidev_spi_bus=0 extraargs=fbcon=map:2 sudo modprobe fbtft_device custom name=fb_ili9341 busnum=0 cs=0 gpios=reset:110,dc:68,led:6 rotate=270...
File types: SCAD STLLicence: Public domain
PrintablesFree
Fits everything nicely, has a cutout for SD card reader, some gaps for ventilation. Fan mounts with 4x 20mm M3 screws and 4x M3 nuts. Case is screwed together with 4x 26mm M3 screws and 4x M3 nuts.
File types: STLLicence: Personal use only
PrintablesFree
You can support my works here: buymeacoffee.com This is a simple 5 mm spacer for the Noctua NF-A9x14 slim 92 mm fan. I designed it for use as a rear exhaust spacer in my NCASE M2 Grater build.
File types: STEP STLLicence: Personal use only
PrintablesFree
Case for the OrangePi Zero SBC. Contains a friction fit hole for the antenna. Cutouts for both GPIO headers and UART pins. Hexagon pattern holes over the CPU for better airflow.
File types: STLLicence: Attribution
PrintablesFree
Orange Pi Zero 2W Official Expansion board for Orange Pi Zero 2W 4.3" display with touch from Ali Four M3x25 screws with a nut and washer Four M3x8 screws Note: The thickness of the touch display is greater than that of the non‑touch...
File types: STLLicence: Public domain
PrintablesFree
Hi, it seems that there are a lot of choice when it comes to Raspberry Pi cases, but little to none, when it comes to Orange Pi cases. That's why i made a case for my Orange Pi. Use 3mm bolts with nuts to tighten it.
File types: STLLicence: Personal use only
ThingiverseFree
Here is a case I designed to fit a buck converter for the ender 3. It uses this converter off of amazon.com: It makes use of the existing feed to the fan, and only requires a 6" jumper (red, black) to go from the melzi hotend fan out to...
File types: STLLicence: Attribution
ThingiverseFree
This is an easy to print, yet stylish enclosure for the Orange Pi Zero with a mount for 2020 extrusions (such as used by the Ender 3) e.g. to be used as print server (such as Octoprint).
File types: STLLicence: Attribution
ThingiverseFree
🌀 Noctua NF-A8 Fan Cover (Push-Fit) This fan cover is specifically designed for the Noctua NF-A8 and gives your setup a clean, modern look with a stylish honeycomb pattern.
File types: 3MF STLLicence: Personal use only
PrintablesFree
Yet another earbud holder. Not like we have enough of those here on Thingiverse, right? Well, I wanted something a bit different from the designs already available.
File types: STLLicence: Personal use only
ThingiverseFree
For my electronic projects I often need battery holders of various size and for different number of cells: single, multiple cells in parallel or in series, or serial lithium-ion type cells with connectors for balanced charging between the...
File types: SCAD STLLicence: Attribution
ThingiverseFree
Boite compact pour le rangement des micro SD et SD. Dans cette configuration, il y a deux slots SD (pour les adaptateurs) et 6 slots micro SD. Éditez les STL si vous souhaitez modifier la configuration.
File types: STLLicence: Attribution
ThingiverseFree
Please note: This is an adapted version of my Raspberry Pi 3 case that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry Pi 4 myself.
File types: STEP STLLicence: Personal use only
ThingiverseFree
Earbud storage case, in two sizes. The 3.5mm versions have slots for the 3.5mm jack. (added a large and XL versions, but haven't tried printing them) The first 0.4mm works as a hinge, I used clear PET for the first couple of layers since...
File types: STLLicence: Personal use only
ThingiverseFree
A snug fitting case for the Arduino Uno with screw board mounts and a snap top. Shields may be installed over the top of the case. There are four holes on the top to view the four LEDs on the Arduino board.
File types: STLLicence: Attribution
ThingiverseFree
Summary Breathing solder fumes can cause serious health problems, a solder fume extractor is a cheap and easy way to minimize the inhalation of such fumes, for this reason and according to my needs I designed and built this minimalist...
File types: STLLicence: Personal use only
ThingiverseFree
If the thingiverse download isn't working, files are also available here: Custom designed Raspberry Pi Case for the new Pi 4. Printed with 3 perimeters & No Top or bottom layers to leave infill visible.
File types: STLLicence: Personal use only
ThingiverseFree
You can now buy this case from my Shapeways shop here: For iPhone 4/4s This is a version of the iPhone Gear Case that I completely designed and drew myself.
File types: STLLicence: Personal use only
ThingiverseFree
The full set of stereo components (and plenty of other stuff): UPDATE 19Feb20: The new isobaric subwoofer is now online: So here it is, the 4" version of the back horn speaker V2.0:
File types: DXF STLLicence: Personal use only
ThingiverseFree
This case can be used to build a very compact Raspberry Pi powered two bay network attached storage (NAS). You can leave a tip (button left) if you like my stuff.
File types: STLLicence: Personal use only
ThingiverseFree
Flexing battery holders with integrated spring for AA It's very easy to pass the wires with this version ! The batteries are very well set in their housing.
File types: STLLicence: Personal use only
ThingiverseFree
Case feet (or hands) for your PC case. Tested with Ncase M1 but possibly could work with a bunch of other case. Same height as the standard human case foot you can find on the internet.
File types: STLLicence: Personal use only
ThingiverseFree
The Earplug Cable Tidy lets you securely wind up the cable and protects mobile device Earplugs. Once you've used it a few times it's quick and easy to keep your Earplugs safe and the cable wound away tidily. Quick and easy to use: 1.
File types: STLLicence: Personal use only
ThingiverseFree
SliSearch lists public model details and links to the original source. It does not host files or verify licences.