Printables
dfi idler PIN
- Creator (as listed at the source)
- 178222 178222
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STP
- Pricing
- Free
- Published
- Category
- Voron Parts & Upgrades
- Likes
- 3
- Downloads
- 3
Overview
A modification of the standard 9mm gantry idler. A 5x25mm pin is used instead of an M5 bolt.This is intended for those who wish to use the 9mm belt tensioner from this mod
(Модификация стандартного 9mm gantry Idler. Вместо болта m5 используется PIN 25*5D.
Это сделано для тех, кто хочет использовать натяжитель 9mm ремне из этого мода):
for use with the 9mm belt mod that replaces all M5 bolts used for the idlers with pins (для использования совместно с другим модом 9mm ремней заменяющего все болты m5 используемые для роликов на PIN): :
5mm shaft hole: dirty9v2.4_dfi_idler_PIN_5
5.05mm shaft hole: dirty9v2.4_dfi_idler_PIN_5.05
5.1mm shaft hole: dirty9v2.4_dfi_idler_PIN
Отверстие под вал 5мм: dirty9v2.4_dfi_idler_PIN_5
Отверстие под вал 5.05мм: dirty9v2.4_dfi_idler_PIN_5.05
Отверстие под вал 5.1мм: dirty9v2.4_dfi_idler_PIN
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Dremel Cutoff SawThis is a Dremel / Rotary tool cutting mount for precision cuts of rods, screws, bolts, drill bits, tubes and more. I wanted to do the Pin Mod on my Voron 2.4r2 and I didn't have an accurate method to cut the pins to size.
Voron 2.4, Orbiter1.5 MountAn Orbiter Extruder Mount for the Voron Afterburner. Print settings same as Other Voron parts. Bolts: 4pcs M3x20 and regular m3 heat inserts
Voron PTFE bowden tube support (608 bearing - bolted)I needed to add a PTFE tube guide to my Voron 2.4 build, and I came across the design by Compared to the original design, I wanted: * The guide to be screwed to the bearing instead of being press-fit.
Voron 2.4 cable chain coverAfter building my Voron 2.4, I noticed that the cables running from the electronics compartment to the Z-axis cable chain were still visible. Since I'm a bit of a perfectionist, I designed this cover to hide them.
Voron 2.4 - Air quality sensor mount (PM2.5 & VOC)I wanted to monitor the air quality inside my printer's enclosure, so I designed a custom housing for a DFRobot BME680 sensor (SEN0248) and a DFRobot PM2.5 sensor (SEN0460). The enclosure mounts to the back of the printer.
Voron 2.4 - Frame Stiffeners - Poor man's versionWhile assembling my 350 mm Voron 2.4, I noticed that the frame extrusions were only secured by a single bolt at each corner.
Voron - DF Robot 720p wide angle camera FIT0892 mountI wanted to use the DFRobot 720p Wide-Angle Camera (FIT0892) on my Voron 2.4, so I designed this gantry mount for it. :) Materials * Qty. 4 × M2 heat-set inserts * Qty. 4 × M2×20 bolts * Qty.
Voron 2.4 Filament Latch (or any 2020 extrusion)Printable quick release latch for panels on 2020 extrusion This is originally inspired by a youtube video - A recent review video on YouTube by Maple Leaf Makers Another user did a review of the clips on YouTube - Best way to mount panels...
Modular Mesh Inserts for the Voron Fan GrilleThis is a set of mesh inserts and retainers to add some protection and (of course) a nicer look to your Voron printer.
THE FILTER, for Voron 2.4Designed by my friend Nate (nateb16). Updated configuration file to improve Filter function, longevity and performance.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.