My wife likes Victorian things, and we found these awesome faux-Victorian iron shelf brackets in a shop a while back.
File types: STLLicence: Personal use only
PrintablesFreeShelf bracket 72x72mm
- Creator (as listed at the source)
- 43D PRINT
- Licence
- CC BY-NC-SAThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- The marketplace does not list the file types.
- Pricing
- Free
- Published
- Category
- Not categorized at the source.
- Downloads
- 182
Overview
Shelf bracket 72x72mm - use 4mm self tapping screws
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
PrintablesFree
Shelf Brackets for Garage, Shop and Utility Room - 150 mm (5.91 in.), 200 mm (7.87 in.), and 250 mm (9.84 in.)
File types: STLLicence: Personal use only
PrintablesFree
Uses two dowel rods or PVC pipe with a diameter of 1 in. Tolerances may need to be adjusted depending on your printer! The rods should fit tightly without requiring excessive force to insert.
File types: 3MF STEP STLLicence: Attribution
PrintablesFree
These are shelf brackets that are optimised to be printed on a small printer like the prusa mini, a1 mini etc..
File types: 3MF STLLicence: Public domain
PrintablesFree
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle).
File types: STLLicence: Personal use only
PrintablesFree
A simple shelf bracket with a honeycomb pattern! Here you can find two more designs I made from this shelf bracket. 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket.
File types: STLLicence: Personal use only
PrintablesFree
For shelves up to 35cm and heavy weight requirements. Inspired by topology optimised models.
File types: 3MFLicence: Personal use only
PrintablesFree
I needed some shelf space in my office, and I have been fascinated by French cleat mounting systems, so I came up with this simple design that provides a strong mount and hides the mounting screws.
File types: 3MF STEPLicence: Public domain
PrintablesFree
I've designed a shelf to raise my coffe equipment. I've used a pine plank, 200mm width, 18mm height and fits perfectly. It is very stable and can be done in any length size.
File types: STLLicence: Public domain
PrintablesFree
Some simple shelf brackets. Use flat head screws so you don't split the layers Print Settings Printer Brand: Printer: Ender 3 Pro Supports: No Filament: who cares PLA/PETG Black print it flat...
File types: STLLicence: Attribution
PrintablesFree
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙.
File types: GCODE STLLicence: Marketplace terms
PrintablesFree
Hey there, DIY enthusiasts! Check out this cool 3D printable bracket for your next wall shelf project. It’s got a sleek right-angled triangle design with extra support built right in, so it’s sturdy without being bulky.
File types: STLLicence: Attribution
PrintablesFree
This is a remix of my popular Honeycomb Shelf Bracket ! I added a voronoi and a triangle pattern. The shelf bracket has the dimensions of 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket.
File types: STLLicence: Personal use only
PrintablesFree
Brought home a bargain shelf, only to find it's a bit wobbly? Don't fret! These 3D-printed brackets are your wobble-busting heroes!
File types: 3MF BGCODELicence: Attribution
PrintablesFree
Simple and strong Print on its side to get the best layer orientation!
File types: STEPLicence: Public domain
PrintablesFree
note, this is for LIGHT use only!! Simple shelf bracket for use with light weight use shelving. Best if use smaller/thinner screws with a washer in the upper holes, this allows you to angle the screw a tad and still hit the center of the...
File types: STLLicence: Attribution
This is a simple shelf bracket 150x150x15 mm Easy to mount thanks to its accessible srew holes. Print Settings: Resolution: 0.30 Supports: yes Filament Material/Brand: PLA/Das Filament Color: Schwarz...
File types: STLLicence: Personal use only
PrintablesFree
Self-Adjusting Thick-Smart Wardrobe Bracket – Fits Any Shelf Up to 25mm Thickness
File types: STLLicence: Marketplace terms
PrintablesFree
This is a low-profile shelf bracket made for 7 3/4" wide shelves. It was designed to be low profile and thus needs to be reinforced with a 3/16" thick round rod.
File types: STEPLicence: Personal use only
PrintablesFree
En simpel mindre hyllkonsol med öppen förstärkning för att kunna skruva fast med 4st skruvar. 70mm x 70mm, går att skala till önskat mått. utskriven i Pla med petg support.
File types: 3MFLicence: Personal use only
MakerWorldFree
For those Airsoft Players that love the rail shelf system for organize and display replicas but hate the long metallic…
File types: STLLicence: Personal use only
PrintablesFree
Fillament shelf bracket, as pictured. I tested a single bracket up to 4kg and then ran out of stuff to put on it and it didn't flex.
File types: STLLicence: Personal use only
PrintablesFree
Filament spools start to pile up and you need somewhere to store them efficiently. This is one solution to the problem because it puts the spools on a shelf where they are easily accessible while also being up and out of the way.
Licence: Personal use only
Creality CloudFree
Found this on markerworld after watching a youtube video showing the brackets holding 100 lbs for a long time.
Licence: Personal use only
Creality CloudFree
A simple yet elegant shelf bracket, capable of holding pretty significant weight. Measures 4" (102 mm) long on each leg and 0.75" (19 mm) wide. I loaded it with about 50 lbs and it seemed to hold fine, using a couple of #6 x 2 in.
File types: STLLicence: Personal use only
ThingiverseFree
Shelfie allows you to design your own storage and shelf systems using a fully parametric design. Simply generate the required Shelfie connectors based on your preferred storage layout using the Customizer button or OpenSCAD directly.
File types: SCAD STLLicence: Personal use only
ThingiverseFree
File types: BGCODE STLLicence: Marketplace terms
PrintablesFree
Do you have leaning towers of filament in your workspace? Put it on the wall ! Here's everything you need!
File types: STEP STLLicence: Public domain
PrintablesFree
I share these brackets that I made for a shelf. They could be strong as the design maximizes the weight it can carry while minimizing the material in the bracket itself.
File types: F3D STLLicence: Attribution
PrintablesFree
Simple parametric hook/bracket for Skadis. Feel free to use the Fusion 360 file to make design any length of hook as required.
File types: F3D STLLicence: Attribution
PrintablesFree
This is nothing special, just a basic bracket to use in a pinch but is surprisingly strong. I printed mine with 6 walls and 35% infill and have been using 2 of them to hold a wooden shelf with up to 11 rolls of filament at any one...
File types: 3MFLicence: Attribution
PrintablesFree
This is a reinforced version of UDM mount by Revnull. Who's desighn while elagent and well desighned is lacking structulary.
File types: STLLicence: Personal use only
PrintablesFree
Heavy-duty, fully parametric monitor riser bracket for wooden shelves. Supports over 200 lb (90 kg).
File types: 3MF F3D STEPLicence: Attribution
PrintablesFree
Dieses moderne Minimal-Regal kombiniert schlichtes Design mit praktischer Funktionalität 🔥 Durch die cleane geometrische Form passt es perfekt in moderne Wohnungen, Gaming-Setups oder Arbeitsbereiche...
File types: 3MFLicence: Public domain
PrintablesFree
Please click ❤LIKE❤ if you appreciate my work 😊 A functional 90° corner bracket with an original curved design , created specifically for FDM 3D printing.
File types: 3MF STLLicence: Marketplace terms
PrintablesFree
Boost Me Please click ❤LIKE❤ if you appreciate my work 😊 A functional 90° corner bracket with an original curved design , created specifically for FDM 3D printing.
File types: STLLicence: Marketplace terms
Ten nowoczesny, geometryczny wspornik półki łączy w sobie surowy design z wysoką funkcjonalnością. Dzięki swojej unikalnej, fasetowej konstrukcji stanowi nie tylko solidne podparcie, ale również wyrazisty element dekoracyjny...
File types: STLLicence: Personal use only
PrintablesFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.