KENWORTH W900

This is a scale model designed to be 1:20 of the famous Kenworth W900. I designed this truck with Inventor using photos of the original truck and some basic blueprints i found on google. I modeled this truck in my spare time wile i was working for Paccar (Kenworth an Peterbilt), as an intern. All the parts can be printed and assembled with screws and crazy glue from local hardware store. I made some cutomizable parts like different suvisors, differents exaust, different rear fenders and an optionnal low-roof bed. Please feel free to ask any question. Also, if you find this model interesting, feel free to leave tips everything is apreciated as a student! Things needed for assembly: - About 100 #5 wood screws cutted to length with cutters (Canadian Tire) - Crazy glue for Marker lite, front grill and mirrors - Screwdriver - 2x Small hinges 3/4'' wide (Canadian Tire) Things to print with quantity: - 1x Cab - 1x Hood - 1x Grill - 1x Front bumper - 1x Rear bumper - 1x Fifth wheel - 1x Front axle - 2x Rear axle - 5x Cross member - 8x Rear wheel - 2x Front wheel - 10x Tire - 5x Marker lite - 1x Air filter - 1x Air filter MIRRORED - 1x Footstep - 1x Footstep MIRRORED - 2x Fuel tank - 2x Washers (Used for exhaust assembly) - 1x Exhaust (any type) - 1x Exhaust (any type) MIRRORED - 1x Front frame rail - 1x Front frame rail MIRRORED - 1x Rear frame rail - 1x Rear frame rail MIRRORED - 2x Fender - 1x Mirror - 1x Mirror MIRRORED For bed option you will need to print: - 1x Bed - Replace Front frame rail for Front frame rail for bed option - Replace Front frame rail MIRRORED for Front frame rail for bed option MIRRORED All Stl parts are placed as i printed them so you should be good.