Printables
Quad Cortex Mini Cover
- Creator (as listed at the source)
- mpanelas
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Audio
- Likes
- 2
- Downloads
- 11
Overview
This will protect the corners and edges of your Quad Cortex Mini without being intrusive or bulky.
I HIGHLY RECOMMEND adding a couple strips of electrical tape on each of the inside corners for grip and padding. This will help keep the cover snug and remove the unlikely chance of scratches from the layer lines.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Modular PedalboardModular Pedalboard This model allows you to print your own modular pedalboard. It is modular because you can add extra lengths of pedal board in the sideward direction, adding 20cm (or 22cm) each time.
Fender Mustang Micro Plus Wall Mount – 3D Printable Holder for Guitar Headphone AmpThis custom wall mount is designed specifically for the Fender Mustang Micro Plus , providing a secure and space-saving storage solution for your headphone guitar amp.
Acoustic guitar soundhole coverA simple and effective soundhole plug designed to prevent unwanted feedback when playing an amplified acoustic guitar using a piezo pickup or an internal microphone.
Neural DSP Quad Cortex Pro Desk StandNeural DSP Quad Cortex Pro Desk Stand This is a print-ready adaptation of the original Quad Cortex Desk Stand by ngbfish , originally published on Printables.
Guitar Pedlboard (pedaltrain classic 1)Guitar pedalboard modeled on the pedaltrain classic 1. Can resist 700N (71kg) load without breaking, printed in PLA.
Guitar Expression Foot Pedal Pinion Gear Replacement PartThis is a replacement print for an expression pedal pinion gear. This was made for a Proel PVP32 expression pedal but this print is applicable to most expression pedals, especially those that use the same type of potentiometers used in...
Guitar Pedalboard System for Common 1.5" x 1" BoardCheap, Custom Pedalboards Sometimes labeled as 2" x 1" boards, these 1.5" (actual width) x 0.75" (actual thickness) boards are sold at many home improvement stores in packs of 4 in 48" length, but you can use any dimensional lumber that...
Pick for Guitar & BassParticular guitar pick design. I've printed it in PLA and works well, I think PETG or ABS work better. I've printed it in two different size and it's a very very simple print. The thickness determines the flexibility.
Modular 3D printable Sound Bar / Center SpeakerSo I have done a few things with speakers so far (Two Way Tube Speaker and 2 Way Orb Speaker) and I came across some nice looking (and at the time dirt cheap) 2 inch full range speakers on eBay.
3D Printed HeadphonesHere is a set of great looking and awesome sounding headphones you can print yourself. The parts that cannot be printed (drivers, cushions etc) are all readily available and will cost around $25 (plus...
Earbud / Earphone Storage Case
DIY Retro Audio PlayerMore Details: Youtube: Inspired by 1980s tape recorders, this audio player was designed with ease of use and accessibility in mind. Despite its nostalgic appearance, it packs modern hardware.
HiFiBerry TouchHi Everyone, Time for my next project to publish. It's called: HiFiBerry Touch. This Boombox is designed in Fusion 360. It contains a 24V 12000 mah rechargeble battery and MoOde audio software. Please press on the Like button?
MakerBot MixtapeRediscover a lost classic - MakerBot a Mixtape! The MakerBot Mixtape Kit gives you the power to create the ultimate gift.![Passive Phone-Horn [iPhorn], a preview image from Thingiverse](/previews/thingiverse/6379059-0/card-aa5c64e3227188a5.webp)
Passive Phone-Horn [iPhorn]Passive Phone-Horn...suitable for an iPhone 11 Pro with case or others. Can be scaled. * passive_iphone_horn_ver1: horn in round shape * passive_iphone_horn_ver2: horn in square shape The sound quality is - as expected - mediocre, but at...
Speaker FriendsSpeaker Friends :-) what can I say. speakers made from ABS and panasonic speakers. :-) for the dimensions of the speakers see pictures. 3d print support material included for the frontside of the head : see picture.
Bluetooth SpeakerI always wanted to have a bluetooth speaker. I thought, why not design and build one. So here it is. This bluetooth speaker contains two rechargeable 18650 battery's, so you have lots of listening fun without plugging it in your...
Speaker Cover: Honeycomb (120mm)Second version of the speaker cover. The model was designed for a 120mm membrane diameter, but just scale it to the desired size. First version:
Mackie Audio Mixer Replacement SliderGot an old Mackie mixer to use as part of a video job. Of course it was missing a volume slider for one of the channels. Here is the replacement I created built from dimensions taken from one of the original sliders.
Trellis SoundboardNEW VERSION WITH NEOPIXELS July 17, 2019 – In this project, the Trellis triggers samples on an Adafruit Audio FX soundboard. The Pro Trinket interfaces between the two over serial and i2c and ties the samples to the buttons.
DeskSHELLDon't know where to put your spare head for your turntable? Your Jack adapter? Don't wonder anymore, this is the box you were waiting for. The Deskshell is a stunning multi-purpose container for your audio items.
Bluetooth Stereo SpeakerPart list: • Stereo Bluetooth: • Stereo 3W+3W power amplifier: • 3W 40mm Woofers: • 3.7V 380mAh LiPo Battery: • LiPo charging module: • Switch: • 1000uF 6.3V capacitor:
Acoustic Boost iPhone 5 CaseAcoustic amplification from a case for your phone! This case for the iPhone 5 boosts audio volume while simultaneously directing it toward you. No need for batteries!
Duli - Dual Stereo Over-Ear HeadphonesThis project began as a prototype & then manufacturing service for Yuni which is attempting to build a set of stereo headphones for people with unilateral hearing loss.
Broken Beats BracketThis bracket resurrects your broken beats headphones, making them useable once again. 1. Simply fill the inside of the Broken Beats Bracket with super glue and slide over the broken area of the strap. 2. Leave the glue to dry. 3.
Tunable "Open/Closed" HeadphonesThis is roughly modeled on the style of 60's and 70's headphones manufactured by Lenco in Switzerland.
Light Headphones StandAn headphones stand I created, inspired by my spool holder. The piece is 50mm long, so be sure your headphone is short enough to fit in :) My Steelseries Siberia V2 fir perfectly with an extra centimetre.
Mackie Volume Knob Replacement *UPDATED*
Flame Controlled MIDI ControllerThis thing is my original design of a 3D printable case for a flame controlled MIDI controller Here is it in action: Project instructions can be found at : The case is designed to be versatile for many printers (hence the minimal use of...
Music Note Headset StandBring harmony to your workspace with this sleek, music-inspired headset stand! Designed with the elegance of a musical symbol, this stand is perfect for audiophiles, musicians, and gamers who want to combine functionality with artistic...
Schiit StackA modular surround that will allow you to stack your Schiit audio components on top of one another. I designed these specifically to place a Mani and a Sys side-by-side, with a Valhalla on top (pictured).
6,3 mm audio jack L connectorL connector for guitar, bass and other things
Speaker wallmount (Sony)This is a Wallmount for my old Sony Soundsystem. But it should fit on many different speakersystems. I use it with a M3 screw and nut.
Socle Google Mini / Nest
Ribcage Guitar PickAdd a touch of skeletal style to your playing with this ribcage-inspired guitar pick. Designed for comfortable grip and unique aesthetic, it’s perfect for shredding riffs or displaying as part of your gothic or metal-themed gear.
GUITAR PICK : DIAMONDA techy looking guitar pick
guitar standModern print-in-place guitar stand, printed in PLA. The design fits most guitars, with a maximum body thickness of up to 120 mm. The one-piece construction ensures stability and ease of use.
GUITAR STRAP LOCKING CLIPDesign Concept The Guitar Strap Locking Clip is designed to securely attach your guitar strap to your guitar, ensuring it stays in place during performances or practice.
Case for bluetooth WSTER WS Q9a little support for a better direction of the sound for WSTER bluetooth speaker. You can buy speaker here: Print with DeltaWASP 20x40 (PLA Black FiloAlfa) For other interesting items go to 🚀
Gibson Gyro Keychain - RemixRemix Details 🔄 This model is a remix of a basic gyro design. To create this specific version, I made the following modifications to the original: I closed the center ring , turning it into a solid...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.