Pinshape
A segmented propeller assembly for 8mm shaft. Segmented parts can be printed on most 3D printers. Shaft is locked to the propeller with a tapered locking bushing. 5-40 x 1.25" screws and nuts for assembling the hub and blades. I used 4 epoxied in 3mm rivet nuts in the top hub to secure the tapered bushing and cone. You can simply thread the four top hub holes and use 3mm screws to secure the tapered bushing and cone to the top hub. The complete assembly gives you a fan diameter of about 200mm or about 8".
Chosen by shared tags first, then category. Each one links to its own marketplace.
This Turbine keychain consists out of two pieces. The case and the Turbine itself. You obviously need one of both pieces to make the keychain. Mounting the Turbine is easy, just press it into the casing.
File types: STLLicence: Personal use only
ThingiverseFreeI had a broken 29mm jet fan like this one: They can be found in small handheld air blowers and dyson hairdryers. The turbine looked too cool to be thrown away, so I made a plane turbine from it.
File types: 3MF STLLicence: Personal use only
PrintablesFreeA pull string helicopter that flies well and is easy to assemble. ABS is the recommended material for best part survival. As requested SolidWorks 2011 source files are posted. Blade profiles are not optimized.
File types: SLDPRT STLLicence: Personal use only
ThingiverseFreeToroidal Turbine Desktop Fan Enjoy and happy printing!
File types: STLLicence: Personal use only
ThingiverseFreeThis is a redesign for an 8040 printable propeller with a 5.5mm (13/64") bore. This prop was designed to keep the minimum cross section above .8mm allowing it to be more easily printed, though at a small efficiency loss.
File types: SLDPRT STLLicence: Personal use only
ThingiverseFreeThis is a spiffed-up version of CorrugatorSupercilii's excellent OpenSCAD Turbine Propeller Generator. The changes are: * Generates the model in print-friendly orientation.
File types: SCAD STLLicence: Personal use only
ThingiverseFreeNot a tool but an ecosystem. Rotating machine with interchangeable tools.
File types: STL STPLicence: Public domain
PrintablesFreeThanks to for the model for the Mavic 2 Pro. For the Air 2, I just scaled the model down to 90%, and extended the bottom parts to grab around the booms a little better. Printed in ABS but PETG should be fine too.
File types: STLLicence: Attribution
ThingiverseFreeThis is a propeller made for printing with no support! Get a good fit on the shaft by drilling the hole after Printing. Printed hole is about 12mm in diameter
File types: STLLicence: Attribution
ThingiverseFreeThe propeller was designed to fit the motor mounts that can be seen in the images. It was able to handle max rpm from 2200KV brush-less motor without failure.
File types: STLLicence: Attribution
ThingiverseFreeHey all I designed a 200mm backwards curved impeller because I couldn't find one on here anywhere! VIDEO OF MY PROTOTYPE PRINT RUNNING This design is similar to EBM Papst motorized impeller, however, this one <$5 to print, vs $200+ for...
File types: STLLicence: Attribution
ThingiverseFreeHerewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 40mm Bore diameter: 4mm Height: 15mm Type: DriveDog 3,7mm
File types: STLLicence: Personal use only
PrintablesFreeHere is the long awaited 10 Stage Axial Compressor that I have modelled & that you all have requested for, so here it is!
File types: 3MFLicence: Attribution
ThingiverseFreeHerewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 45mm Bore diameter: 4mm Height: 19mm Type: DriveDog 3,7mm
File types: STLLicence: Personal use only
PrintablesFreeWhy buy your mini fan blades online when you can print them yourself, in the colors you want? This design is an adaptation of the fan blades commonly found in mechatronics project kits.
File types: STLLicence: Attribution
PrintablesFreeI wanted to mount a prop on the engine, so I put some screw holes in the flywheel and made a mount for the prop. It uses 3 screws and nuts.
File types: STLLicence: Attribution
ThingiverseFreeWater jet propeller. It's Solidworks model was exported in other CAD formats. This 3D model can used in producing on CNC machines and for 3D printing.
File types: STEP STLLicence: Marketplace terms
Cults3DPaidWater jet propeller. It's Solidworks model was exported in other CAD formats. This 3D model can used in producing on CNC machines and for 3D printing.
File types: STEP STLLicence: Marketplace terms
Cults3DPaidWater jet propeller. It's Solidworks model was exported in other CAD formats. This 3D model can used in producing on CNC machines and for 3D printing.
File types: STEP STLLicence: Marketplace terms
Cults3DPaidWater jet propeller. It's Solidworks model was exported in other CAD formats. This 3D model can used in producing on CNC machines and for 3D printing.
File types: STEP STLLicence: Marketplace terms
Cults3DPaid⚔️ A detailed Jet Engine Nacelle with Fan Blade prop and replica — 3D printable and perfect for cosplay, collectors, and display fans.
File types: STLLicence: Marketplace terms
Cults3DPaidWater jet propeller. It's Solidworks model was exported in other CAD formats. This 3D model can used in producing on CNC machines and for 3D printing.
File types: STEP STLLicence: Marketplace terms
Cults3DPaidA model of the chakra blades owned by Asuma and Shikamaru in Naruto. Designed after references from the manga. Made by Alex at Mirrored Line Props
File types: STLLicence: Attribution
ThingiverseFreeCosplay as Squall Leonhart with an epic replica GunBlade! In this project we'll walk through customizing and 3D printing this massive prop. It’s light weight, fun and easy to wield at your next cosplay event.
File types: STL SVGLicence: Attribution
ThingiverseFreeKatarina's Blade from league of legends V1. It is ~18,5" (47cm) long, the blade is 13" (33cm) long and 0.55" (14mm) thick. Should be printed in multiple pieces and glued togeather after.
File types: STLLicence: Personal use only
ThingiverseFreemore legend of zelda swords since the only model of this sword is a payed model. I modified the model directly taken from the game glue required as always update 5/15/2023 -fixed error hole in parts 6 and 7 Update 5/24/2023 -idk what I did...
File types: STLLicence: Attribution
ThingiverseFreeA re-cut of 3Demon's Narsil sword for easier, fuss-free assembly.
File types: 3MFLicence: Attribution
PrintablesFreeThe Infamous Elucidator from Sword Art Online. It is 42" long(1.07m) and you probably can't print this. I printed this on my custom XXL Rostock Max. Total print time was around 15 hours.
File types: STLLicence: Attribution
ThingiverseFreeMy goal was not to be as accurate as possible but to make an easy-to-print look alike krueger's glove. And it's really easy, you can't miss it. You can easily modify the finger dimensions to fit your hand in the OpenScad file.
File types: SCAD STLLicence: Attribution
ThingiverseFreeThis is a model of the hidden blade used in the first Assassins Creed game. Based on popular switchblade designs can now be printed and assembled for a working replica. Intended for display and bragging rights only! WARNING!!
File types: STLLicence: Attribution
ThingiverseFreeHere's my attempt at the Nightingale Blade from Skyrim, its 1:1 scale. Youll need to print 2 square pegs and 6 round pegs Hope you like it!
File types: STLLicence: Personal use only
ThingiverseFreeI love Blade Runner and there's a huge community around the blasters; especially Deckard's and K's. I wanted to challenge myself in recreating a prop from references alone.
File types: F3D STLLicence: Attribution
ThingiverseFreeIt is time to celebrate the unholy glory of the Great Old Ones. Cthulhu lays, dead but dreaming, and we await for his return, reckoning the Earth and leaving nothing but destruction and madness in the wake of his return. The time is nigh.
File types: STLLicence: Attribution
ThingiverseFreeThis is a digital 3D printable model of Zireael , the legendary sword wielded by Ciri in The Witcher 3 .
File types: STLLicence: No changes allowed
PrintablesFreeA Knife that has a Knuckle Duster as a Handle. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below.
File types: STL STPLicence: Personal use only
PrintablesFreeIt's dangerous to go alone, take this: This is a full size, fully 3D printed Master Sword from Legend of Zelda. Even Link would be jealous of your plastic sword.
File types: STLLicence: Attribution
PrintablesFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
