Heltec V4 Compatible Case with Switch

What the marketplace statesPrintables

Creator (as listed at the source)

Josh Newton

Licence

Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.

File types

STEP STL

Pricing

Free

Published

July 15, 2026

Category

Electronics

Counts at the marketplace

Likes

29

Downloads

52

Similar models

Chosen by shared tags first, then category. Each one links to its own marketplace.

H1+ - Enhanced H1 Case for Heltec V3/Heltec V4 by muzi.work running MeshtasticA remix of the original H1 case design by muzi.works for an enhanced Heltec V3/V4 board-based Meshtastic® radio build.PrintablesSTLPersonal use onlyHeltec T096 Case - Meshcore or MeshtasticHeltec T096 CasePrintablesSTLPersonal use onlyH1 - Case for Heltec V3 running Meshtastic- Case Front has been updated to fit the new BLE antenna on the V3.2 board details here The original case design that started it all for the Heltec V3 Lora board.PrintablesSTLPersonal use onlyH2T - Case for Heltec T114 with GPS running MeshtasticA GPS enabled Meshtastic® case for the Heltec T114 board with GPS module.PrintablesSTLPersonal use onlyHanging Solar Node - for use with Meshtastic and Meshcore LoRa DevicesThis enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or desire to...PrintablesSTLPersonal use onlyCase for Heltec T114 with GPS + Li-Po 103450Battery up to 10mm x 34mm x 50mmPrintablesSTLPersonal use onlyMeshCore/Meshtastic Solar Node with Active CoolingMost solar enclosures are sealed boxes that cook your battery in direct sun. This one isn't — a fan kicks on above 40°C to vent heat, powered by the solar input so it never drains your battery.PrintablesSTEP STLMarketplace termsHeltec LoRa 32 V4/V3 Pocket Pager CaseI updated my Pocket cases for the Heltec LoRa 32 V4 and they still work for V3. PLEASE READ THE ENTIRE DESCRIPTION!PrintablesSTLAttributionH1+ 18650 battery with Heltec v4 / v3 compatibilityThis is the H1+ case modified to fit common 18650 batteries and with added compatibility with the newer Heltec V4 module. Similar to my previous model.PrintablesSTLPersonal use onlyHeltec LoRa 32 V4/V3 Slim CasesCommercial Use and Attribution Notice © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the...PrintablesSTLAttributionMiltary radio case for Heltec V4Tactical Heltec V4 field radio case with battery, GNSS, antenna and printable accessoriesPrintablesSTLAttributionCase for Heltec T114 with GPS + Li-Po 103665Battery up to 10mm x 36mm x 65mmPrintablesSTLPersonal use onlySuperBase Case – Meshtastic radioLicense Notes This work is licensed under a Creative Commons Attribution-ShareAlike (4.0 International License) Copyright © 2026 MUZI WORKS Commercial use is fully permitted under this license , meaning you are free to sell, monetize, or...PrintablesSTEPAttributionLoRa Repeater Node for Heltec V4Enjoy and let me know if you have questions or modification requests! Prints with no supports, I recommend printing with ASA, 4 walls and 20-30% infill.PrintablesSTLAttributionnRF52840 + SX1262 + 18650 case2 варианта исполнения: кейс с выемкой под переключатель Пример переключателяPrintablesSTLPersonal use onlyCase for nrf52840 with E-paper display 2.9" + Li-Po 103665Выключатель: В качестве оптоволоконных вставок применен прозрачный PETG филамент Также потребуются: - гайка вплавляемая м3 х 5шт - винт м3 с потайной головкой х 5штPrintablesSTLPersonal use onlyAlley Chat HT114 Pocket with LED cutout and Switch ProvisonCombination of both the LED cutout and switch provision versions of the integral antenna model. This is the switch on Amazon: . clip off 4 of the 6 leads, and shorten the other 2.PrintablesSTLAttributionWio L1 Tracker Pro Recessed Antenna Case Mod 1I really like Flo's version of the L1 Tracker Pro case as something with a recessed antenna was exactly what I had been looking for. Unfortunately I never got a fully successful print out their model.Printables3MF STPAttributionHeltec V3 OLED LoRa CaseThis is a form fit snap fit case for the Heltec OLED LoRa V3 Board, and includes space for a battery, USB access, and a port for a SMA antenna. Can be used for Meshtastic / MeshCore.ThingiverseHeltec v4 + 2x18650 caseCase for Heltec v4 with 2x18650ThingiverseSTLAttributionLoRaMeshNodes - MSNvAThis case for a solar powered Heltec T114 device, to be used as MeshCore companion or Meshtastic client. It has been designed in OpenSCAD, using the NopSCADlib. OpenSCAD source files and further documentation can be found on GitHub.ThingiverseSTLMulti Mesh Receiver Dual, Meshtastic, MeshcoreA few days ago I made this triple receiver for experimenting, I know the antennas where too close and I didn't know how the Heltec works together, like I wrote, this was just to play around.Thingiverse3MF STLPersonal use onlyfakeTec CaseCompact and sturdy case for Meshtastic / MeshCore node build. The case has a snap in back cover and a spacer to keep the battery separated from the electronics. The case allows the use of RG178 pigtail for better radio reception.ThingiverseSTL STPAttributionHeltec LoRa 32 V3 HT Pocket CasePrintablesSTLAttributionHeltec LoRa 32 V3 HT Slim CasesAdded a 3k version with internal antenna space and no SMA. Added desk mounts and Baofeng clips that take M2.5 nuts. Commercial Use and Attribution Notice: Alley Chat HT Slim © 2024 by Alley Cat and Majestic AV, LLC.PrintablesSTLAttributionHeltec T114 Pocket GPS CaseI updated my pager style case for the Heltec T114 with GPS. Video coming soon. PLEASE READ THE ENTIRE DESCRIPTION!PrintablesSTLAttributionLilygo T-Beam V1.x TB1 Case by Alley CatCommercial Use and Attribution Notice: Alley Chat TB1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 .PrintablesSTLAttribution'26 Harbor Breeze Solar Mesh Node Mounts (Meshtastic/Meshcore)Lowe's Solar Flood Light Mesh Node Bracket System Lowe's Harbor Breeze Solar Light (Item #1234868 | Model #ZDL1362): This is a custom mounting bracket system designed to convert a widely available, inexpensive Harbor Breeze solar flood...PrintablesSTLPersonal use onlyHeltec T096 Modular CaseThese are all in the alpha phase, just wanted to whip something up for this new device. Please offer advice, changes, makes and print settings. I've created all these in tinkercad sooooo... yeah.PrintablesSTLPublic domainCase for Heltec V4 Board with GPS, Battery, and Power ButtonThis design was inspired by: "3D-Printed Enclosure for Heltec V4（GPS)with 3000mah battery" by at . We like the look of that model, but modifying the STL files from it was more work than drawing it from scratch, so we made a design...PrintablesSTLPersonal use onlyScrewless heltec v4 case (soldered pin headers, optional GNSS)Case for Heltec V4 Compact, screwless enclosure for the Heltec V4 LoRa board. The lid is held in place by press-fit (friction), no screws, no threaded inserts, no additional hardware required.PrintablesSTLPersonal use onlyTiny Heltec T096 Case with 3000 mah(103665)I've been using the Heltec T114 with the great 3000 mAh case from Printables, and I really loved that design format However, I ran into two problems: 1.PrintablesSTLPersonal use onlyHeltec Mesh Node T096 Solar Case 1100mAhSolar case for the Heltec Mesh Node T096 using a 1100mAh battery. No screws or bolts required. The T096 slides onto rails, make sure these are smooth.PrintablesSTLPersonal use onlyHeltech v3 18650 caseThe main body requires supports (for the face where the antenna connector is mounted, because it will face down).PrintablesSTLPublic domainRack ears for Heltec V4 radioThis model is an add-on for this model: Choose the frame with the option for extensions. The rack ears will click in and are secured with an M6 bolt. Note: I don't have a 10" rack to test the 10" ears.PrintablesSTLAttributionHeltec T114 solar and air cooled case with 10,000mAh battery - ImmortalA solar powered Heltec T114 with active air cooling and a 10,000mAh battery. The fan will activate automatically when the case heats to 40℃ and turn off when cool. Named 'Immortal' because it can go months on a single full charge.PrintablesSTLPersonal use onlyHeltec V4 Case with Integrated 18650 HolderThis is a Heltec V4 case with an integrated 18650 holder. You can add battery spring clips to hold it securely.PrintablesSTLAttributionxiaoWa PCB case with SSD1306XiaoWa PCB case model . This model is made to actual dimensions and has no tolerances. Please enlarge it before printing to allow for material shrinkage.PrintablesSTLPersonal use onlyLoRa SolarNode v2.0 - solar Meshtastic / MeshCore repeater case (170x115 panel, cable-tie pole mount)A parametric, printable, weather-resistant enclosure for a solar-powered Meshtastic / MeshCore LoRa repeater node. Designed around a 170 x 115 mm / 6 V / 3 W panel, 2x 18650 in parallel, a CN3791 MPPTPrintablesSTLPublic domainheltec tracker case charging standheltec tracker case cgharging stand, to avoid that annoying bottom mounted charging cable issue. Enclosed antenna stays vertical, case isnt laying on its side. Screen is still viewable. Theres a recess for the power cord....PrintablesSTLPublic domain

SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.

Report this model