Printables
Frameless 64×64 RGB Matrix Desk Stand — Raspberry Pi Chassis for Vinyltron
- Creator (as listed at the source)
- emuck
- Licence
- Creative Commons — Attribution — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- SCAD STL
- Pricing
- Free
- Published
- Category
- Music
- Likes
- 1
- Downloads
- 4
Overview
Minimal rear chassis for the P3 64×64 HUB75E matrix display. No bezel: the panel floats edge-to-edge, all LEDs. Single printed part.
Two vertical rails bolt directly to the panel's rear M4 boss columns using the magnetic screws that ship with the display. Raised 9mm seat rings clock up the magnet standoff height so everything clamps flush. A crossbar carries a Raspberry Pi 3B on M2.5 thread-forming standoffs. Wedge feet set a 10° backward lean, coplanar by construction.
FITS
Seengreat P3(2121)-32S 64×64, 192×192mm (boss columns ±86.5mm, holes at y=0 / y=73mm)
Raspberry Pi 3B
Adafruit RGB Matrix Bonnet #3211 (optional)
HARDWARE NEEDED
4× M4 magnetic screws — the ones that shipped with the panel
4× M2.5 screws — thread into 2.2mm pilots, no inserts
PLA or PETG - 0.2mm · 15% infill · ~75g · no supports · flat on the bed Fits any 250×210mm or larger bed
Parametric source included. Boss coordinates and lean angle are named variables — two-number edit regenerates the part for a different panel revision.
Built for Vinyltron — free Volumio plugin that puts album art, screensavers, and weather on a 64×64 matrix.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Flight Tracker Screen for Raspberry Pi (any model) 64x32 HUB75 RGB Screen 4mm PitchAbout This Case This is the official case for the Original Flight Tracker project : The case has been designed to keep the finished Flight Tracker as sleek and minimal as possible while still being easy to print and...
LED LanternYou can build a sci-fi inspired lantern using an Adafruit QT Py and LED Noodles. Powered by the QT Py RP2040, six individual LED noodles are wired up to the GPIO pins and controlled with PWM.
HDD enclosure for Raspberry Pi (or SATA-to-USB)This is an enclosure for two 3.5" SATA hard drives that need to be connected through SATA-to-USB adapters. My particular need is to connect to a Raspberry Pi, so I included accommodations for a Pi case.
Double Decker Bus & Chassis (Parametric)
TELEAVIA MATRIX_ _The Teleavia Matrix is a full-color, 512 LED, NeoPixel matrix video monitor run by Processing and driven by FadeCandy._ _ The Teleavia Matrix's name and design are a tribute to the Art Deco, Teleavia Panoramic 111, a beautiful French...
Stacking Pi CaseI really liked the Adafruit Pi case so I made my own version. It will stack tightly and has both a full legnth top and a shorter top for use with the slice of pi board by Ciseco This version is drawn from scratch in draftsight rather that...
BoomBeastic stereo
Volumio Jukebox with Touchscreen LCD and Pi-DAC Pro
FPV Drone Parametric Modular | Your Own DesignKRAFTONIX 5-Inch Modular True-X FPV Frame A parametric OpenSCAD 5-inch FPV frame designed for FDM printing and MakerWorld Customizer.
Lightsaber RP2040Become a Jedi or Sith and build your own lightsaber with 3D printing and electronics from Adafruit.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.