Printables
Audio Mixer Knob
- Creator (as listed at the source)
- T Fristen
- Licence
- Creative Commons — AttributionThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- 3MF
- Pricing
- Free
- Published
- Category
- Audio
- Downloads
- 1
Overview
Volume knob for audio mixer
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Questo modello 3D è progettato su misura per sostituire perfettamente la cap slider originale Consigli per la stampa: Materiale: PETG / PET Altezza Layer: 0.12 - 0.16 mm Perimetri: 3 - 4
File types: 3MFLicence: Personal use only
PrintablesFree
Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob.
File types: STLLicence: Personal use only
PrintablesFree
Got an old Mackie mixer to use as part of a video job. Of course it was missing a volume slider for one of the channels. Here is the replacement I created built from dimensions taken from one of the original sliders.
File types: STLLicence: Personal use only
ThingiverseFree
Jocys.com 3D Printed Audio Source Switch and Volume Control Boxes DOWNLOAD Version 1.4 (2022-08-04) ZIP ~16MB • Intro • Updates • Parts • Tools • PETG Filament • Printing Settings • STL Files Below you will find parts and tools, which will...
File types: STLLicence: Attribution
ThingiverseFree
this is a fader knob replacement for Pioneer DJM mixers. to my knowledge it is similar to the ones in DJM300 and DJM600 models, maybe more models. print without supports and enjoy!
File types: STLLicence: Personal use only
ThingiverseFree
Just another Deej enclosure I created, features 4 sliders and 2 knobs, plug in the back and with the stand it sits up nicely, used M4 bolt inserts Logos are glued in to secure, holes are for easy removal Parts I used: Slider Potentiometer...
File types: STLLicence: Attribution
ThingiverseFree
This is a replacement radio knob that I created for my Jensen Car Radio however it should be compatible with any dial that utilizes a 6mm D-Shaft drive.
File types: 3MF STLLicence: Personal use only
MakerWorldFree
Replacement for one of the tiny parameter knobs on a Pioneer DJM-600 mixer. I got the best result by printing it upside down with a 0.4mm nozzle and 0.2mm layer height. No supports needed.
File types: 3MF STLLicence: Attribution
ThingiverseFree
3D-gedruckte Halterung / Box für den Soundigital Bass Knob Verleihe deinem Soundigital Bass Knob eine hochwertige und saubere Optik im Fahrzeug.
File types: STLLicence: Marketplace terms
MakerWorldFree
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping...
File types: STLLicence: Personal use only
PrintablesFree
A wireless rotary encoder knob that connects via Bluetooth to a computer or Android device and controls audio.
File types: F3D STLLicence: Public domain
PrintablesFree
Rotary encoder knob. 30mm x 30mm x 16.3mm For 6mm rotary encoder Very easy and fun to print. You can print in one color or, like I did, use two, as shown in the attached photos. Supports disabled.
File types: 3MFLicence: Personal use only
PrintablesFree
Small enclosure box for NE5532 mixer boards, which you can get for cheap from Aliexpress. The lid is really simple and has to be put with M3 screws. For keeping the board itself in place I made some 3mm holes to also fit M3 screws.
File types: 3MFLicence: Personal use only
PrintablesFree
Pc volumes mixer, Deej based Makerworld link: An arduino volume mixer for your pc! It uses the community created deej system to mix the pc volumes, i disegned this 3d case for arduino that hosts 5 faders. Also the knobs are 3d printed.
File types: STEP STLLicence: Attribution
ThingiverseFree
A GHOSTLY assortment of various knobs and faders for customizing various pro-audio gear from dj mixers, analog mixer boards, midi control surfaces, DJ controllers, to stereo systems, and more!
File types: STLLicence: Personal use only
ThingiverseFree
A redesign from Fed2828. 10k Ohm potentiometers have been added on the left side. Everything was assembled on an Arduino Mega mini, but an Arduino Pro Micro or Uno can also be used. But firstly check if it will fit in this base!
File types: STLLicence: Attribution
ThingiverseFree
Remix of the Deluxe Audio Strap: Valve knob real nut & bolt for supreme realism. 🇺🇸🔩💯🧬⚒️ For nut/bolt designs!
File types: STLLicence: Public domain
ThingiverseFree
These are labelled knobs for standard sliding potentiometers, except for the mic knob, which is for standard rotary ones.
File types: STLLicence: Marketplace terms
MakerWorldFree
I'm using this for a stand alone art installation which is open for the public 24 hours a day. I want to reduce volume during the night, though, so the servo adjusts the volume based on the time.
File types: STL
YouMagine![Rotatory knob for mixer (internal hole 6mm) - [Dual Extruder Ready], a preview image from YouMagine](/previews/youmagine/rotatory-knob-for-mixer-internal-hole-6mm-dual-extruder-ready-0/card-8732519f82b846df.webp)
Kitchenaid Professional Mixer Speed selector knob works also w. Tilt mixers. Printed w. Elegoo CC2 in black PLA
File types: 3MFLicence: Marketplace terms
PrintablesFree
File types: STEP STLLicence: Personal use only
ThingiverseFree
Hi this is a Head phone mount that can slip on to a shelf or on to a desk. These are design to just slip on to a shelf or desk with no effort and hold themselves in place using the materials properties to allow it to act as the spring...
File types: STLLicence: Personal use only
ThingiverseFree
--- Mini-Speakers - best with a sub-woofer but usable without ! P-CUBE Satellites: Desktop Obelisks: --- Satellite Speakers - require a sub-woofer ! Ray-gun Satellites: Tower 35 Loudspeaker: --- High Output Sub-woofers !
File types: STEP STLLicence: Personal use only
ThingiverseFree
The Earplug Cable Tidy lets you securely wind up the cable and protects mobile device Earplugs. Once you've used it a few times it's quick and easy to keep your Earplugs safe and the cable wound away tidily. Quick and easy to use: 1.
File types: STLLicence: Personal use only
ThingiverseFree
I modified the original design to fit my 19mm Ikea Bjursta desktops. The tops actually measure closer to 18mm with calipers, but with the surface texture and variation in the print and the wood, 19mm is the perfect fit.
File types: STLLicence: Attribution
ThingiverseFree
Monster Mouth Headophone Holder 2020 edition. New version that incorporates feedback from the original design which is almost 5 years old : New version changes: 1. Reduced material used by >%25 (faster and easier to print) 2.
File types: STLLicence: Personal use only
ThingiverseFree
I have been asked many times to release this so I finally decided to. It's a GoPro knob replacement for the original long one. You will need to provide the bolt.
File types: STLLicence: Attribution
ThingiverseFree
GhostlyVinyl - iPhone amplifying dock. Also available with cassette for Samsung phones.
File types: STLLicence: Attribution
ThingiverseFree
Project & Support Moved This project and it's continued support have moved to Josef Prusa's I will no longer be updating items here, and may not respond to comments or questions.
File types: STLLicence: Attribution
ThingiverseFree
I modified an older design to fit the iPhone 6 (also added model for iPhone 6 Plus plus). This is a passive amp/speaker/horn/stand for iphone 6 that I modified in Tinkercad (shared publicly there too).
File types: GCODE STLLicence: Attribution
ThingiverseFree
NOMOON is a parametric spherical 3d-printed speaker generator created in OpenSCAD. For a demo video of NOMOON see: Some additional notes are on working with NOMOON are at It is loosely based on my previous OpenScad speaker generator...
File types: SCAD STLLicence: Attribution
ThingiverseFree
My version of the shelf mount headphone hanger. NO SUPPORTS REQUIRED Using 3d print guide from TheGoofy's "Yet ANOTHER Machine Vise" and inspired by philbarrenger's "Monster Mouth Headphone Holder" ending up with this completely different...
File types: STEP STLLicence: Attribution
ThingiverseFree
Learn how to build your own MP3 audio player. Code, files and full step by step instructions are on available on the Adafruit Learning System.
File types: F3Z STEP STLLicence: Attribution
ThingiverseFree
File types: STLLicence: Personal use only
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.