A remix of m3x's very nice antenna mount.
Chosen by shared tags first, then category. Each one links to its own marketplace.
I needed a mount for dual external Wifi Antennas. Print on edge with supports. update: After assembling teh bracket on my PC I found that the screw hole was on the wrong side... so I moved it on this update.
File types: STLLicence: Personal use only
ThingiverseFreeThe Upgrade: This remixed version scales the quick-release pyramid base up to 43mm x 43.6mm x 9.6mm. This allows you to drop your Arrow Antenna securely into full-sized, standard tripods without any wobble, twisting, or modifications.
File types: STLLicence: Public domain
ThingiverseFreeThe DeepSpace SEEKER35 DJI O4 Pro Antenna Mount is a TPU replacement mount designed to provide a more secure and protected mounting solution for the DJI O4 Pro antennas on the DeepSpace SEEKER35 frame.
File types: STLLicence: Marketplace terms
Cults3DPaidThe archive contains 52 models, 30 of which are antenna mounting parts, and 4 are GPS mounts for up to 22 mm and up to 28 mm. The GPS models are available with a hole for the power supply cable and without it.
Licence: Personal use only
Cults3DPaidModel of basic HGLRC Hammer Dual 170mm. You can use it as Dummy unit for modeling a holder for Antennas or parts including antennas.
File types: OBJ STEP STLLicence: Marketplace terms
Cults3DFreeIf you're like me, and you have the Bingfu Dual Band WiFi 2.4GHz 5GHz 5.8GHz 9dBi Magnetic Base MIMO RP-SMA Male Antenna - you may have noticed the magnetic base a little lacking.
File types: SCAD STLLicence: Personal use only
MakerWorldFreeInternal seeed studio XIAO ESP32S3 (or similar) mount for uConsole. Best if used in conjunction with the HackerGadgets expansion board or AIO board with the extra headers for USB.
File types: STLLicence: Public domain
PrintablesFreeI use the Decathlon CAPERLAN Lakeside 100 (7m) as a lightweight mast for my portable antennas. To make the setup easier in the field, I designed this simple ground base.
File types: 3MFLicence: Personal use only
PrintablesFreeMounts for VHF/UHF Yagi elements for portable satellite operations.
File types: STLLicence: Personal use only
PrintablesFreeThis is a simple wall mount for adhering an SMA pigtail to a wall or flat surface with double-sided tape. Should fit any standard SMA connector panel mount.
File types: F3Z STEP STLLicence: Personal use only
PrintablesFreePole mount and housing for ADS-B 1090 MHz PCB antenna You can find the mount for a 25/35/40/50/60 mm pole.
File types: 3MF BGCODELicence: Personal use only
PrintablesFreeLoRa / Meshtastic Antennenhalter für die Fensterbank – ohne Bohren, spurlos No-Drill Windowsill Mount for a LoRa / Meshtastic Antenna Warum es das gibt Ich wollte eine LoRa-Antenne draußen vor dem Fenster aufstellen – mit freier Sicht für...
File types: SCAD STLLicence: Attribution
PrintablesFreeA mount/support for the UV-K5 that can be screwed onto any support. For security, to insert the radio you need to open the rear clip.
File types: STLLicence: Public domain
PrintablesFreeThis adapter lets you mount a Trivec-Avant 2055-3 SATCOM antenna on a Discovery Drive azimuth/elevation rotor. You can aim the antenna the same way you would a dish or ham antenna to maximize signal.
File types: 3MF BGCODE STLLicence: Public domain
PrintablesFreePart A Hardware: 1x 7/16" Bolt Head 1x 1/4" Bolt See attached dimensions for Part A, parametrically spec'd to print a 1" interior diameter.
File types: STLLicence: Personal use only
PrintablesFreeA single-piece bracket that holds an LDG RBA-1:1 balun or RU-9:1 unun (or others). The back plate is mountable on a wall or tube, and the unit drops into an open-top cradle at the bottom.
File types: STLLicence: Personal use only
PrintablesFreeI designed this base to keep both the radio and its main accessories within easy reach, such as the supplied antennas, an adapter (SMA to SO-239 or SMA to BNC) for connecting a coaxial feed line, and the USB charging...
File types: STLLicence: Personal use only
PrintablesFreeWindow mount for the LilyGo T-Echo (Meshtastic) designed for use in vehicles with sliding windows. The antenna is routed outside, the device sits inside the car.
File types: STLLicence: Personal use only
PrintablesFreeDieser Starlink Halter eignet sich zum Befestigen des Starlink an einer M8 oder M10 Schraube, zum Beispiel an der beliebten Manfrotto Superclamp oder auf einem Stativ.
File types: STLLicence: Personal use only
PrintablesFreeIt it was an OEM product, you know it was tear a hole in your wallet. This cost effective alternative has 3 mount options. Use the core base plate to have a slim mounting option.
File types: 3MF BGCODELicence: Marketplace terms
PrintablesPaidI saw Kawobei's D8R V Mount but needed one for the D4R so I made a copy in Designspark Mechanical. Enjoy. Antenna Tubing be found using this search: 3mm is the stuff to get.
File types: STLLicence: Attribution
ThingiverseFreeThis thing was made with Tinkercad. This Antenna Ear Cap add-on is a two part set designed to be used with a 14 gauge bicycle spoke.
File types: STLLicence: Attribution
ThingiverseFreeThe Quick-Mount Bracket is designed for easy and efficient mounting solutions for various applications. Its modular design allows adaptability for both wall and pole setups.
Licence: Personal use only
Creality CloudFreeFile types: STLLicence: Personal use only
ThingiverseFreeThis is the insulator bushing found on many SO-239 3/8" inch stud CB and ham radio antenna mounts. Use PETG for outdoor durability. I recommend 2 or 3 walls and 20-25% Gyroid Infill
File types: STLLicence: Attribution
ThingiverseFreeJust some minor modifications and slots for a zip tie to mount an rx antenna
ThingiverseFreeThis is a designe inspirated on the Nazgul Evoque V3 that finishs a new designe. Print both in TPU. Two M3 bolts and nut are needed to assembly
File types: SLDPRT STLLicence: Attribution
ThingiverseFreeO4 antenna mount for the base version of the Axisflying Manta 5 SE dc
File types: STLLicence: Personal use only
MakerWorldFreeNeeded a mount for the RTK antenna for a Navimow mower. This fits the base mount, mounts with 4 screws to gable end of building.
File types: STLLicence: Marketplace terms
MakerWorldFreeThe feet were too tall for my motors and rubbed against the bell, so I cut a bit off them.
File types: STLLicence: Attribution
ThingiverseFree5" GEPRC racer frame dual antenna and capacitor mount. made to fit a "Panasonic FM 1000uF 35v Low-ESR Aluminum Electrolytic Capacitor"
File types: 3MFLicence: Attribution
ThingiverseFreeI was looking for a nice solution to mount the antenna in to the 90° angle.The Piece can be pushed to the landing and holts already firm in my case.
File types: STL
The non-SMA version fits antennas like the Flyfish Osprey. This is a Remix, I sadly cannot find the original Version anymore though.
File types: STLLicence: Attribution
ThingiverseFreeA snap-in cradle that mounts an inline SMA lightning arrester and supports the LMR-400 coax on both sides, so your surge protection isn't just dangling mid-run on the connectors.
File types: F3DLicence: Marketplace terms
MakerWorldFreeGot tired if not finding any preexisting mount that worked for me. My VTX is quite big and won't allow an SMA connector to fit properly so I made this mount as far as possible from the frame so that it doesn't break the SMA connector Used...
File types: STLLicence: Attribution
ThingiverseFreeI needed an antenna mount for my Recruit, and thought others may need too. I printed mine out of TPU (Filiflex actualy) so it has a little bounce which should (and has) prevented damage to VTX.
File types: STL
This model is a pole mount top piece for my Mesh Tower, which contains a basic triangle attached for guy wire connection.
File types: STLLicence: Personal use only
MakerWorldFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
YouMagine
