Cults3D
RC transmitter Soda-can steering wheel (only for Futaba)
- Creator (as listed at the source)
- SELFWORKS
- Licence
- CULTS PU - Private UseStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Paid
- Published
- Category
- Gadget
- Likes
- 1
- Downloads
- 1
Overview
FUTABA transmitter steering wheel I’ve uploaded a new tighter-fitting model version. Printer accuracy and filament shrinkage can vary, so pick whichever works best for you. If the tighter one is hard to install, just use the previous model. If it feels a bit loose, go with the tight ver.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
DIY vtx plus fan holder !!fpv annything!!whit these models you can fpv annything i used this from aliexpres i put a fan on it becase the vtx will get verry hot and wil maby metlt the plastic i used pla !!!NEVVER TURN ON THE VTX WHEN THE ANTENNA IS LOOSE OR NOT ON THE...
rc transmitter joystick (dx6i and others with 8mm sticks)did you always miss the feeling of your gaming console while driving your rc boat, car, plane or helicopter, here is the solution . just print it and stick it on.
DJI RC2 SunshadeNow that I've figured out which remote is which…I've created a bracket for the DJI RC2 controller to also be compatible with the sunshade in the previous model located here...
RC Transmitter Front Cover (3D Printable)A clean and modern front cover for a DIY RC transmitter. Designed for hobbyists building custom radio controllers with dual joysticks, display, antenna, and switch mounting.
T.1154 transmitter assembly 1/5 scaleThis is a 1/5 scale T.1154 transmitter and receiver assembly. The airplane used as a template is a DH Mosquito. This particular assembly is found at the very back of the cockpit.
Dummy PlaneThis dummy RC plane was created to help me set up complicated flight conditions on my Edge TX transmitter. My print is in PLA with 2 perimeters and 5% infill. Your default settings should work too.
Case for Happymodel ES900TX ELRS ModuleCase for Happymodel ES900TX ELRS module, with fan space. Print the model in any material where there are the leds there are holes of the right size for using transparent filament to bring the light on the outer...
SCX24 Remote Hanger for Honeycomb Storage WallHSW hanger for neatly storing your SCX24 RC remote on the wall.
Tyco Taiyo RC Transmitter Controller Battery Cover 9.6v
5mm LED HolderSecures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 8mm hole with at least 1.5mm material thickness Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.