Thingiverse
The creator did not write a description for this model.
Chosen by shared tags first, then category. Each one links to its own marketplace.
Build your own custom RC boat stand using inexpensive 3/4" PVC pipe and standard 90° PVC elbows! I designed this connector specifically to make building an RC boat stand simple, affordable, and customizable.
File types: 3MFLicence: Marketplace terms
Cults3DPaid-Free version of the 3D printed RC airplane Eclipson Model T. The free version available here does not include landing gear and floats. You will need to hand launch the airplane.
File types: STLLicence: Personal use only
ThingiverseFreeHi guys. My talented friend name Gong Shuang like to share this easy to print, easy to build and cheap to own RC Speed Boat to you guys.
File types: STLLicence: Attribution
ThingiverseFreeThe step file can be found here, so you can improve or costumize it on your own: Have fun! Foresail and keel is added, it improved steering a lot. Files for the clip-on-keel added...
File types: STEP STLLicence: Personal use only
ThingiverseFreeVideo on Youtube: Code to control the boat with two esp8266: Parts List: (Not affiliate links because i don´t know how tu use them) Motor: Racerstar 2207 (1600KV Version): Props: D1 Mini NodeMcu: Buttons for the controller: ESC: 18650 Zell...
File types: STLLicence: Attribution
ThingiverseFreeNeedz MOAR boat? U can haz 4/3 moar here: Note I am seeing copies of my design being posted by other users in violation of site TOS - I am the original creator of this project.
File types: STEP STLLicence: Personal use only
ThingiverseFreeThis JetBoat is a remix inspired by the great work or wersy, I recommend reading his build instructions ! : Speed Boat 3 RC This design remake features a jet propulsion.
File types: STLLicence: Attribution
ThingiverseFreeProject: convert a small RC-boy boat into a cruise ferry. Why? because my son loves the cruise ferries on the rout near our summer house.
File types: STLLicence: Personal use only
ThingiverseFree1/35 semi scale model of a armored sub chaser "project 194" or "BMO" i am designing at the moment. You might need to lengthen the Deck Cover a little bit, to fit it to your print.
File types: STLLicence: Personal use only
ThingiverseFreeThis is a small side project for my combat boat 90. The project can be seen here: Ironically, a cooling water pump for the motors proved to be the hardest part of the whole project! There are basically 3 problems with a micro pump design.
File types: STLLicence: Personal use only
ThingiverseFreeI always wanted to design and print a swamp boat. Now it was time to realize it. The boat consists of two parts, which are screwed together. For sealing the whole thing is glued around the internal cable duct.
File types: 3MF STLLicence: Personal use only
ThingiverseFreeI am try to create new another water jet boat propulsion for RC models. Actual version used on by boat is "v12" It is complete open source (only for non-commercial use, another license on request) Do not hesitate to add comments about this...
File types: STLLicence: Personal use only
ThingiverseFreeMy parent's front yard will flood with up to 4 inches of water in heavy rain. I've told my dad for years that it would be a lot of fun to run an RC boat when this happens. I decided to make one for him for father's day.
File types: STLLicence: Attribution
ThingiverseFreePremise: This is my take on the concept of an open source outboard motor. Inspired by the original open source outboard by Makeshift_, I wanted to design one that had a bit more customizability, with varying options for cosmetic...
File types: STLLicence: Personal use only
ThingiverseFreeHope you will enjoy this sexy little hovercraft I designed on my surface pro during lunch hours at work : I am not an engineer or a designer so please, feel free to modify at will.
File types: STLLicence: Attribution
ThingiverseFreeJune 2017: News!!! The rudder assembly has been reworked to allow for a change in the pitch angle. I mounted two servos and mix them (V-tail program on the transmitter). You need two 624ZZ 4mm x 13mm x 5mm ball bearing.
File types: STLLicence: Attribution
ThingiverseFreeThis is a prototype of a mini jet boat drive. First trys looks good in the bathroom. Next tests in the swinmming pool.... For the moment the propeller is not printed, it's a 20mm propeller
File types: STLLicence: Personal use only
ThingiverseFreeFile types: STLLicence: Personal use only
ThingiverseFreeFull, RC ready, free model. Quite complicated and requires some skill to make it look like in the pictures.
File types: STLLicence: Personal use only
ThingiverseFreeThis is my first try in designing an outboard motor. It uses 3mm screws for assembly. It also uses 5mm shafts and 5x7x10 bronze bushing. It is designed for a 540 / 36mm size motor with 25mm mounting.
File types: STLLicence: Attribution
ThingiverseFreeA simple 1/10 scale boat and trailer to haul it about on. The hull is a scaled version of KAD370's simple boat hull plus a new bow cover (windshield not included) and the trailer is inspired greatly by Troyanderson's boat trailer but...
File types: STLLicence: Attribution
ThingiverseFree2895 Downloads & so far not one make !! the first maker may just get some thing for free ! video links seem to have cocked up below heres my channel Are you fed up printing benchy's .There a great model don't get me wrong ! ..
File types: STLLicence: Personal use only
ThingiverseFreeThe great KMS Bismarck by TheFoxInTheBox begged to be made into an RC version. While the size was great, the portions needed to be sliced to fit my Ender 3 and Elegoo Saturn, so just thought I would share the work.
File types: 3MF STLLicence: Attribution
ThingiverseFreeA nozzle with steering and trim option for this water jet drive:
File types: STLLicence: Attribution
ThingiverseFreeThis is a RC Boat Hull that i will let you do customize to fit a motor and other stuff that you will need a for a RC boat to run.
File types: STLLicence: Attribution
ThingiverseFreeThis is an RC ship that is modeled directly after USCG FRC. Its 4'6" if printed at 100% scale. It can handle roughly 10" seas. The hull must be modified to accept whatever propulsion system you want to use.
File types: 3MF STLLicence: Attribution
ThingiverseFreeBasically took two awesome RC boat parts and combined them, this is a work in progress, I haven't started printing it off yet so I'm bound to change it up a bit. I've also cut it up a bit smaller than the original to fit on my machines.
File types: STLLicence: Attribution
ThingiverseFreeThis LCM 3 is based on m-bergman`s 1:200 LCM 3, scaled to 1:16 and made wider for fitting a 1:16 Tiger I. I have also added under part of the hull and space for rudder and propeller. I still need to make engine and servo mounts.
File types: STLLicence: Attribution
ThingiverseFreeF222 Fregatte Augsburg (1972) Bj,1955 Länge: ca111cm Breite: ca 11.5cm Höhe: ca 35cm Maßstab: ca ! : 100 Mit 3D Drucker (Anet A8) und K40 Laser gebaut !
File types: STL SVGLicence: Attribution
ThingiverseFreeI created this stand to work on almost any RC vehicle. It is designed so that it is detachable and easy to transport to the field. The arch is 11.3 cm from tip to tip and has a depth of 7 cm.
File types: STLLicence: Attribution
ThingiverseFreeThis is my second 3d print project. Scale: 1/35 Lenght: 730mm Width: 174mm The different hull pieces can be aligned with small pieces of 6mm rods or pipes. The stern tube can have a diameter of 6 or 8mm.
File types: STLLicence: Personal use only
ThingiverseFreeServo mount designed for my R/C boat, flat as possible, small as possible and stable as possible. Servo mount is designed to glue it into the boat but can also be screwed, bottom hole diameter is 3mm. Fits with standard 40x20mm servos.
File types: STLLicence: Attribution
ThingiverseFreethis is a 30 mm vectorable water jet for rc boat need part - 1 ball bearing sc684zz - 1 stainless steel rod 4 mm diameter - 1 brushless motor - spare m3 bolt and nut - 1 aluminium coupler for rc boat (3mm to 4mm) 9 - 06 - 2017 - Add a new...
File types: STLLicence: Attribution
ThingiverseFreeThis is a remix of the excellent model by rene76 I have exported the separated parts as .STL files. There's 2 versions of the hull pieces with or without the sacrificial support panels. I included a custom cradle stand I made for it.
File types: STLLicence: Attribution
ThingiverseFreeThis is a project of a yacht with features of a typical Dutch "Bakdekker". I am now busy printing the hull and fittings. A STEP file of the entire boat is available. !!! Everything is still in design phase and can still change !!!
ThingiverseFreeCheaten beim Fischen? Angeln an Stellen, an die sonst niemand kommt... Fischköderboot mit Köderkipper und Hakenschlepper. Ausgestattet mit einem Echolot, welches Fische unter dem Boot anzeigt.
File types: STLLicence: Personal use only
ThingiverseFreeThe aim of this remix was to have a complete library of parts required to print and build a single propellor version utility ship.
File types: GLB OBJ STLLicence: Attribution
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
