Thingiverse
remixed fooyabt for Y and X belts
- Creator (as listed at the source)
- propmaker
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 146
Overview
I really liked the fooyabt belt tensioner but my bed tray is only a few mm off the extrusion so it would hit the tensioner and shave off about 5mm of Y space so I went to mesh mixer and made it flush with 2040 rail I use the fooyabt belt tensioner for my x and love it EDIT I added an X belt case that I originally made for the CR-10 but as I was trying to maximize the build volume the standard belt tensioner case cut a few mm's off the X also I use to use washers to fill the space between the puller and the idler and Dfr2923 remixed a better puller i'd advise using that one rather then the standard cause the idlers fit better without washers here's the link Edit 2 I added a dual angle X belt case for those who have something like a light bar on the back of the X arm and need the extra room I haven't printed or tried it myself but its there if you need it
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Timing Belt Holder for 20mm Aluminum Extrusion RailThis is a belt holder for mounting a 6mm-wide timing belt to a 20mm-wide aluminum extrusion rail. Fastens to the rail with an M5 bolt and nut. Belt is fed through the bottom of the mount, back out the front, and clamped by two M3 screws.
fooyabt - fessyFOO's Yet Another Belt Tensionerfooyabt - fessyFOO's Yet Another Belt Tensioner Belt Tensioner for Tronxy X1 and other that use the v-slot extruded aluminum rails. have STL's in a few sizes specified by their range of travel: 10mm, 15mm, and 20mm.
Customizable Plate Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, ...)
Creality (Ender 3) Filament holder 80mm spools
Extrusion profile SLOT COVER 2020 2040 4040 Cable managementExtrusion profile slot cover. Perfect for cable management and to protect against dust and scrap of plastic. To install it you have to pop it in from one of his corner and push the rest in. Or slide it from an end of the extrusion.
Precise Customizable Extrusion V-Slot Covers | 2020, 2040, 4040 | Ender 3 compatible
Ender 3 - Ender 3 PRO Filament fixPrint it have fun..........
Creality CR-10/S4/S5/Ender 2/Ender 3/Ender 4 Extended Extruder Arm
ultimate creality cr10 ender 2 3 double blower fan mount (stock hotend)(EZABL)
Creality Ender 3 V-Slot Tool Holder TrayA simple v-slot tool tray for the Creality Ender-3 3D printer. Print and slide into the bottom v-slot on the y axis, the fit could be a little better but it does the trick to hold your things lying around :) Please share your makes if you...
Ender 2/3/5 part-cooling fanduct (also fits CR10)Upgrade your Ender 2 with this fan duct and get better PLA-prints! (but don't use PLA to print this upgrade, use PETG or ABS instead) Check out our website for more cool stuff! HERE .
CR-10 Double X stepper damper bracket
creality improved lever feeder (cr10 10s ender 2 3 4 )(UPDATE 05/08/18)
CR-10/Ender-2 Filament Guide for EZRstruderThe normal filament guide for the CR-10 and Ender 2 doesn't fit with SeeMeCNC's EZRstruder due to the filament loading path hitting the base of the guide. I've cut some pieces out, so now everything fits nicely.
Ball Joint Filament Guide for 2040 ExtrusionNeeds M5x10mm, M5x10mm or M5x6mm bolt, and 4mm wide PTFE tube. Use 4mm drill bit if PTFE tube doesn't wand to go through the hole.
Adjustable 2020 USB LED Mount - Ender, CR-10
Creality Mk8 Hotend Captive Heatbreak Liner ModThis is a fully reversible modification to the Creality hot end that eliminates the known issue of the PTFE tube slipping in the Bowden fitting allowing a small gap to form between the end of the tube and the back of the nozzle.
CR-10S/Ender 2 Filament Spool Holder REMIXOriginal Text: I loved the design/concept of the spool holder designed by edgarp but found the edges very hard to grab when trying to take the holder off of the filament spool.
CR-10/Ender-2 Filament Guide/Cable HolderThis is just a simple filament guide/Cable Guide for the CR-10 and Ender-2 Extruder or derivates. It uses a 3mm or 4mm PTFE Tube to guide the filament as straight as possible to the extruder inlet to prevent touching the leadcrew or wear...
CR-10 magnet mount for e3d, volcano, cr-10 stock, remix of heavy duty, MGN12Update9: 02-Jun-2019 No real update - but I repaired the SWAP part v0.16 through netfabb because it had errors. More than a year until Stalkk (thanks for the hint! found out that the part had errors.
spacer for ender 2 ender 3 cr10remixed for fast placement. also on my ender I managed to pass the z,Y,ystop cable behind the Zmotor, this improved my cable management. with the 2mm sopacer u will need longer bolts. P.S.
2020 SliderWork in Progress I will build a 3d FDM printer myself in the next months and want to try something else for the X axis carriage, also I wanted to use the E3D V6 holder for the Anet A8 by TNS to fit onto the slide, therefor I took the...
Universal V-slot frame Z-brace mod - Tevo Tarantula ProUniversal Z-brace mod - Tevo Tarantula Pro should fit almost any v-slot frame design (just pick a bracket version that fits your frame) ** Mod describtion : ** - this mod helps make the frame more rigid and eliminates any vibration that...
CR-10/Ender-2 Filament Guide/Cable Holder (with a twist)This is quick remix of the filament guide by , with the wire clip flipped 90 degrees to make room for the extruder release lever. Note: I only remixed the 4mm tube variant.
Aluminium V-Slot FreeCAD Sketch 2020 2040 4040 ExtrusionFreeCAD is a free software for parametric 3D modelling but I was not able to find a freecad sketch for extruding vslot used in 3d printers and cnc, so sharing this freecad file to the designers allows you to make extrusions of any length...
Ender Fan Fang Ender2 ENDER3 CR10 STOCK 5015 Double BlowerEnder 2 Double Blower reduce Fan 90% It works 101%! Ender Fan der zu 101% funktioniert!
Ender3 Filament Spool Holder REMIXRemix from very good TAKAYUKI_MANO_Ender3_Filament_Spool_Holder I improved the roller for best guide of spool and the reduce the diameter of the nut for insert the spool without having to unscrew the nut every time.
Ender 3 tensioner - uses stock bearings and screwbearings smooth out the friction a lot better than no bearings. so why throw those out? not needed for Ender 3 v2s (already uses bearing tighteners)!
Clip-On Maintenance Stands 2020 2040 4040Loved and used mbaldwin's maintenance support stands when fiddling under the bonnet of my Ender 3 v2 but they kept slipping off, so redesigned them with clips so they stay put. Clip on and rotate off.
Ender 3 Pro - X & Y Belt TensionersMy take on an X and Y axis belt tensioner. I looked around thingiverse and didnt really see anything I liked so I designed my own.
Complete Ender 3 BL Touch Guide (Updated 06/13/19) - No cutting wires or buying adaptersLuckily BL Touch is now fully supported by TH3D so this makes things incredibly easy. Misc Requirements: * Generic or branded BL Touch (Clones can be bought for as low as $4 on Aliexpress or genuine for about $48 on Amazon.
2020/2040 Linear Rail Mount Helper (Customizable)I am currently in the process of creating my own 3d printer based on 2020 beams and there is a common issue when it comes to mounting linear rails: It is hard to get them dead center, as the hammer nuts or the preferable pre mount nuts...
2040/2020 Spool Holder2020/2040 Spool Holder A remix of the excellent spool holder by Jason Canning. This spool holder is designed to be bolted into M5 T-Nuts on the back of a 2040/2020 frame. This was created for use with the Prusa Bear Upgrade.
PLA Temperature TowerSTL, G-code for Ender-2 and G-code for Tevo Tornado. Temperature tower to analyze the optimum temperature for PLA. v2-tornado-torre-temperatura, fix a startup problem.
ULTIMATE creality cr10 ender 2-3 single blower LEFT RIGHT fan mount (stock hotend) EZABLI've made this fan mount in remix of my double fan mount, better suitable for little printers like the ender 2. I'm at the moment using the double blower version so I havent the photos of this one.
V2: Filament Guide for 2020 2040 3030 Extrusion
Ender 3 X Axis Belt Tensioner
Transform3r 3D PrinterPreface This printer was built during my YouTube Series of the Transform3r. Although the series isn't really meant as a tutorial and would also be way too short, it should be easy to puzzle all the knowledge together to build this printer.
Dial Indicator Gauge/Laser/SN04 probe mount for the Petsfang on a Tornado/ CR10/ Ender2or3/Michelangelo and more
V-Slot Covers now flush with extrusion (optional) - fully customizableAfter receiving several questions on how to make the customizable v-slot covers of Kerb Orbiter flush with the extrusion (had left a comment there), I decided to upload my modifications as a remix.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.