Thingiverse
Markierstange Schlitten
- Creator (as listed at the source)
- moritzknbl
- Licence
- Creative Commons - Attribution - Non-Commercial - Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Parts
Overview
Schlitten für Markierstange
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Screw measuring tool, M2-M10, 4-120mmBased on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height rectangular...
Bench Mountable 4-Jaw / 3-Jaw / 2-Jaw Vise with Swappable Jaws - 100% Printable!Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication.
Build Plate Cleaner Microfiber HolderSimply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Added an alternative knob for thin cloth or sandpaper.
Solder Scroll - Ergonomic, Adjustable Solder ToolThe Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm).
Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mmDesign reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case.
Skadis Mount CollectionFirst part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests.
Vacuum nozzles for all common hose sizesA se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes.
Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm)No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while learning Fusion 360.
Fast-Operation ViseA number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl .
Nasa chainmail (4x4, 8x8, 12x16 and 32x34)Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.