Thingiverse
Airsoft Foldable picatinny stock
- Creator (as listed at the source)
- Blackdragon_FC
- Licence
- Personal use onlyThe marketplace states no licence. SliSearch shows the most restrictive assumption; check the source page before you use the model.
- File types
- The marketplace does not list the file types.
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 10
Overview
A simple stock for picatinny stile mount designed to require minimal supports. The stock features: - Fixed mount (minimal hardware required) - Foldable mount - Symmetric hinge, allows to change the folding side - QD sling point - Separated butt stock to be printed in TPU or just other colors. Hardware needed: -2 M3x6 screws -2 M4x20 screws -2 M4 nuts -1 M5x30 screws -1 M5 nuts (additional hardware for the foldable mount) -2 M3x6 screws -2 M2x12 screws -2 M4x16 screws -2 M4 nuts -2 small O-rings / rubber bands (6mm OD)
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
![KAC SOPMOD Flip Up Iron Sights [2 Styles] By Goticwar, a preview image from Thingiverse](/previews/thingiverse/4743484-0/card-49377883c8cbea5a.webp)
KAC SOPMOD Flip Up Iron Sights [2 Styles] By Goticwar
Flat M-LOK Hand StopFlat M-LOK Hand Stop use 6-48 socket head cap screw F3D files included in case you want to scale or make holes bigger or reposition the holes
Angel Customs airsoft tracer housingTracer housing designed for a Angel Customs tracer core. I got this idea after getting one of the cores but not wanting to spend the $40 on a housing that I could make myself.
Airsoft AS150-2 Mock Threaded SuppressorHi everyone, this is my non-functional mock suppressor intended for use with Airsoft or other replica rifles. The design is based on many different suppressors from video games and real life.
M870/M8876 M4 Mag AdapterMine was too loose and I didn't like the release being on the side because I would randomly eject my mag on accident.
Airsoft M4 Hop-up UnitM4 Hop-up Unit for an Airsoft Gun. Should work with any TM Compatible Airsoft Gun. Been looking for an 3D Printable Hop-up and None where available, So i ported an Model Created By an user on GrabCad user to STL files.
Canted Rail (Picatinny)Picatinny 45 Degree offset rail mount with thumb screw mount slight variations in model was made specifically for the mounting clip to prevent plastic from breaking, had to make the clip tooth a bit thicker and give some material on top of...
Airsoft Picatinny angled grip, no hardware neededSimple angled grip fixed in place with the provided 3d printed tab. (Optional: an M2 screw can be added for additional locking)
Airsoft AS52-1 Mock Muzzle BreakHi everyone, this is my own designed mock muzzle break designed to be used with airsoft or similar replica rifles. The design is slightly influenced off a Huxwrks muzzle break.
M870/M8876 GripI slightly remixed this because when I pumped mine it would not pull back far enough to load more BBs. So this is like 2mm shorter.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.