Thingiverse
Wire Spool rack
- Creator (as listed at the source)
- celtharius
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Tools
- Likes
- 166
Overview
While trying to organize my work area i realized i needed a bunch of reels/spools for all the different types of electronic wire i have all over the place. there are 2 different types of spools in this. one 80 mm, and one 60 mm. with racks corresponding to them. the mounting holes work for both, but the top one needs to be 60. the "feet" are measured to allow for 80 at the bottom, and 60 on the top. the "reel brackets" are made to fit into each other, but depending on your printers accuracy, you might need to file a little on the insert part. there are 0,2 mm difference between the hole and the insert though, so with decent accuracy it should be fine. 8x m3 bolts + nuts to attach everything will be needed. this is my first post ever, and probably not the greatest design in the world as i'm new, but hopefully it can come in handy for someone. Edit: forgot to add the side piece to the original post, have updated it. Also added a 3 high module side which is currently not tested yet. but should work fine. the stability of 2 modules is great. Also added racks for 5 rolls, 60 and 80 mm.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Screw measuring tool, M2-M10, 4-120mmBased on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height rectangular...
Bench Mountable 4-Jaw / 3-Jaw / 2-Jaw Vise with Swappable Jaws - 100% Printable!Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication.
Build Plate Cleaner Microfiber HolderSimply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Added an alternative knob for thin cloth or sandpaper.
Solder Scroll - Ergonomic, Adjustable Solder ToolThe Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm).
Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mmDesign reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case.
Skadis Mount CollectionFirst part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests.
Vacuum nozzles for all common hose sizesA se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes.
Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm)No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while learning Fusion 360.
Fast-Operation ViseA number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl .
Nasa chainmail (4x4, 8x8, 12x16 and 32x34)Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.