- Creator (as listed at the source)
- feiweibufei
- Licence
- Standard Digital File LicenseThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- 3MF
- Pricing
- FreeThe marketplace does not list a price. Check the source page before downloading.
- Published
- Category
- Vehicles
- Downloads
- 2
Overview
本模型为1：14比例泥头车无动力前桥，总长190mm，其他零件可按清单购买
后桥模型参见
前轮轮毂和轮胎参见
为我助力 制作不易，感谢支持
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
使用了我的16通道可编程遥控模块，可对声音和灯光控制编程设置多种花样，全套配件可以到我淘宝店铺直接购买，有能力的也可根据在线BOM表自己组…… 【金山文档 | WPS云文档】 可编程自卸卡车声光版BOM表， 以下为介绍视频： 以下为组装教程：
File types: STLLicence: Marketplace terms
MakerWorldFree
将1/14田宫rc卡车轮毂放大至1/10比例，配有 12mm六边接合器 轮毂尺寸： 直径52mm/宽26mm 适配市面上大多数1/10平跑车轮胎 给想整活的伙计们使用 每只轮毂需要m2*10与m1.6*5各十颗 由于正ET值过大，轮毂内侧与平跑车的上下摆臂会有干涉，前轮胎可能会与底盘有干涉，需配合延长接合器使用，本人主页均有上传。
File types: STLLicence: Marketplace terms
MakerWorldFree
三石的塑料手轮质感一般，使用其他金属手轮价格较高且横向很宽，无意间发现HotRC的金属手轮价格低且质感很棒，所以只做了这个转换器。 使用原装的螺丝就可以固定，hotrc金属手轮价格25上下
File types: STLLicence: Marketplace terms
MakerWorldFree
File types: STLLicence: Attribution
ThingiverseFree
Please do not ask for source files or STEP files, I will not share these. _ Change log: 2019-03-03 Added per request the hull and deck as "onepiece"-pieces, for you daredevils that want to try that :) 2018-07-30 Added some links to other...
File types: STLLicence: Personal use only
ThingiverseFree
This is a 48 inch wingspan sailplane of my own design. All parts have been 3D printed using PLA. The wing has been test flown, but the entire assembled plane has not yet been tested. The wing uses the Eppler 214 airfoil.
File types: STLLicence: Attribution
ThingiverseFree
K-141 Kursk was a Russian Oscar II -class nuclear powered submarine capable of carrying 24 cruise missiles and 24 torpedoes.
File types: STEP STLLicence: Attribution
ThingiverseFree
* Assembly Videos At bottom of this page* Now, I am proud to introduce Thumper. Thumper is a scaled CJ7 rock crawler. These crawlers are common in the western and south eastern USA. This model is very close in build to the real thing.
File types: GCODE STLLicence: Marketplace terms
PrintablesFree
Features of this Open Source car: Maximum 3D printed parts Easy to source hardware Simple Assembly Easy maintenance and battery access Dual wishbone suspension Open differential Low noise drive (using Blheli...
File types: 3MF F3Z STEP STLLicence: Attribution
PrintablesFree
A" parts for small servo B" parts for big servo Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R.
File types: STLLicence: Attribution
PrintablesFree
This is a fully functional 3D Printed RC Semitruck model. The main attraction includes an automatic hitching system plus power & command delivery to the trailer.
File types: STLLicence: Personal use only
PrintablesFree
This is a 3D printed model of the P-51D Mustang from WWII. It features the fin offset and the wing washout of the original P-51. The entire model can be printed without the use of supports. I printed the entire model in PLA.
File types: 3MF STLLicence: Personal use only
PrintablesFree
Note: A larger version of this drone, able to fit a 20x20mm stack is available: The Goblin FPV Drone I worked hard on this little guy. Poured love into every edge and crevice. Spared no mechanical consideration.
File types: STEP STLLicence: Personal use only
PrintablesFree
So you think you’re a big bad 3D printing wiz, huh? Well gee do I have a project for you! This project single-handedly consumed more months of my life than I care to admit. But the finished result…? Well, it’s sweet.
File types: STLLicence: Personal use only
PrintablesFree
Adjustable 1/10 Scale Jack Stand for RC cars / trucks. Printed with no supports. Use Axial SCX10 RC trucks / jeeps... etc. 2/10/20 - Added 15mm extended lift part to files in case need a little extra height.
File types: STLLicence: Personal use only
ThingiverseFree
Hello, this is an RC Dozer. Its intended to provide a fun entry level way to get hands on experience with some simple electronic components commonly found in robotics.
File types: STLLicence: Personal use only
PrintablesFree
This is my 3D printed Inspire clone. All the original STL files are here but full details on how to build including arduino code etc are at . All my designs are free to use.
File types: STLLicence: Attribution
ThingiverseFree
Introducing the All-New Robak 2: The Ultimate RC Car for Makers. The second generation features an optimized suspension, providing increased off-road clearance.
File types: STEP STL SVGLicence: Personal use only
PrintablesFree
A fully 3D printable and modular 5 inch quad that's quite good at everything, but most notably s e x i n e s s.
File types: STEP STLLicence: Personal use only
PrintablesFree
JEEP WRANGLER WITH REMOVABLE HARDTOP - SCALE 1:12 (Now updated with optional "angry eye" grill)
File types: STLLicence: Marketplace terms
PrintablesFree
This is a fully functional RC DumpTruck that plays a crucial role in transporting materials like 3D printed scraps, jenga blocks, or debris within RC construction sites. Meant to be used alongside the DIY RC Excavator and DIY RC Skidsteer.
File types: STEP STLLicence: Personal use only
PrintablesFree
The new OpenRC Tractor is finally here!! It's been almost two years since I started working on this new MK3 TEA20 project. Now, after hundreds of hours of design, test, print, redesign… it’s finally here and all the hard work has paid off!
File types: STLLicence: Personal use only
PrintablesFree
3D printed airboat, 1:8 scale, No sealing, 3s battery, 9x6e Propeller, FlashHobby 3542 1450kv motor, Quicrun WP 60amp.
File types: GCODE STLLicence: Marketplace terms
PrintablesFree
It's finally here. Version 2.0 of the FPV-Rover. This is the second version of the FPV-Rover. This one is with 540 motor.
File types: STLLicence: Personal use only
PrintablesFree
This is an almost entirely 3D-printed RC version of the CyberTruck. Once built, it has four-wheel drive and four-wheel steering which makes it extremely capable both on and off road.
File types: STEP STLLicence: Personal use only
PrintablesFree
Slava Ukraini! All funds gained from donations and affiliate commission will be going to Ukraine.
File types: STEP STL
PrintablesFree
A radio-controlled fishing boat that is suitable for exteriors, for example on a lake. The boat is almost 68 cm long, 20.5 cm wide and approximately 28 cm high. Parts of the boat are designed so that they can be printed on the MK3 printer.
File types: 3MF GCODELicence: Personal use only
PrintablesFree
Completely modular, designed for durability and sexiness. The ultimate printed 5" frame
File types: STEP STLLicence: Personal use only
PrintablesFree
RC model tanku KV-1 v měřítku 1:10. Předloha je typ vyráběný v červnu 1941. Model má ovládaný pohon, otáčení věže, náměr a zákluz. Veškeré podklady pro stavbu jsou v návodu.
File types: STLLicence: Personal use only
PrintablesFree
This is a heavy duty 3D Printed RC Excavator that can actually dig!
File types: STLLicence: Personal use only
PrintablesFree
Various designs for XT30 connectors Here you will find my designs for the XT60 size and MR30-M . XT30 angled mounting bracket designd for flat installation and still easy to grip the plug To additionally secure the plug in the holder, a...
File types: 3MF GCODE STEP STLLicence: Personal use only
PrintablesFree
Viz Manual_1990_CZ.pdf See Instructions_1990_EN.pdf Hotový model na fotografiích je na prodej. The finished model in the photos is for sale.
File types: GCODE STLLicence: Personal use only
PrintablesFree
Introduction “HAWk” is a flying wing concept designed for RC hobbyists that feels just as good to fly as an RC plane made from conventional materials.
File types: 3MF GCODE STLLicence: Personal use only
PrintablesFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.