Thingiverse
Multimeter sturdy case
- Creator (as listed at the source)
- Cascao
- Licence
- Creative Commons - Attribution - Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF STL
- Pricing
- Free
- Published
- Category
- Tools
- Likes
- 1,029
Overview
Case for multimeter. Max multimeter dimension is 180x100x60mm. Space for wires, probe, temp sensor, fuses... Cases: print with minimum supports (only on latch area) Latch: slide in place on top shell when open. (maybe will need some sanding to slide smoothly. I choose to do it with tight tolerances to have a firm movement without any sloopy feeling. If you is not much into sanding, you should print it at 101 or 102% size) Pin hinge: they are split in a half for better printability and strenght. You need four of these. Maybe you will need to clean case holes with a 5mm drill before mounting. Seal: to be printed in TPU 30% infill. [optional] Handle is optional to be screwed, if you want see also: Clamp meter case: IR thermometer case: Drill bit box: OBD2 case:
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Clamp meter rugged caseA case for my clamp meter [or anything you want] It print in place with functional hinge and minimum use of supports (only on hinge area)! Latch is to be printed separatelly in TPU. Latch mount is a 2mm diameter nail.
Tackle Box with Hooks, Bobber, and Lure
Drill boxRugged box for drill bits (or anything else) internal dimensions are 140 x 62 x 40 Box and lid print in place with hinge fully functional. Supports (minimum) are only needed at latch area.
IR thermometer boxA box for my infrared thermometer [or anything you need to safely guard] Internal dimensions are 65 x 170 x 53 mm It prints in place with supports needed only on the hinge area The latch should be printed in TPU or...
Water proof storage boxWater proof tactical optic storage box for fishing lures, srews or other small parts. With clip shutter. Also Base with and without partition. 160cm x 100cm x 35cm Also usefull as survival kit box.
Modular Honeycomb Storage Container / Label spaceThis Container is a customizable storage solution designed for makers, hobbyists, and organizers.
Fluke - Rugged Case with foam insertThe case is based on my parameterizable " Rugged Box ". Inner dimensions: 130 x 185 x 65 mm (Bottom height: 50 mm) Support my work For non-Prusa parts and filaments, check out 3DJake International , UK , Germany , France...
Easy customizable / parametric electronics project box case enclosure housing by pbtecThis is a OpenSCAD highly configurable regular electronic project box V2.4. See the pictures for what is possible.
FLUKE 87 Rugged CaseRequires only 6x M3 x 30 mm bolts for assembly, with no additional hardware needed. May also fit Fluke 89, 187, and 189, but compatibility has not been tested.
ratgdo32, v2.53i, v2.52i, v2.5i, v2.5, & v2.0 PCB Case / Enclosureratgdo32 & v2.x case/enclosure with multiple mounting options!SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.