Printables
Loudest Emergency Whistle
My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here .
- Creator (as listed at the source)
- ThreeD-Michael
- Licence
- Standard Digital File LicenseStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Audio
- Likes
- 4,745
- Downloads
- 30,974
Overview
News 2024-03-17:
My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here .
News 2024-01-21:
I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here .
Read the full description
Update 2023-03-08:
I added a variant with an alternative lanyard eyelet ("eyelet-across"), see picture above.
WARNING:
This is an emergency whistle and not a toy! It's extremely loud which can harm the ears, so please protect your ears and don't use it near other people or animals!
Summary:
This time I was looking for a new emergency whistle and again couldn't find anything that suited my needs. So I made my own, and these are the main benefits:
it is exceptionally loud, you will hardly find anything louder here in this size,
it is very sturdy,
it has an ergonomically shaped flat mouthpiece that ensures a proper lip closure,
it can easily be used hands-free,
it has a double tone that increases audibility,
it can be operated softly or loudly depending on the strength of the blow,
it has a large eyelet suitable for thick straps and even small carabiners,
it is easy and relatively fast to print, only requires 7 grams of filament.
How to print:
Use a line width of 0.4 mm and a layer height of 0.2 mm, 5 top layers and 5 bottom layers. Don't use support!
The whistle requires correct positioning of the Z-seam - it shouldn't be placed in the narrow air passages inside the whistle. The Z-seam should be positioned as shown in the image above (the white dots represent the Z-seam). Use the “Z Seam Alignment: User specified” option in Cura or the "Seam Painting" option in PrusaSlicer to achieve this.
Print slowly to achieve sharp edges.
When using Cura, activate the option “Enable Bridge Settings” with the following addional settings:
Bridge Wall Flow: 100%
Bridge has multiple Layers: Off
Brid Skin Flow: 70%
If you want a multicolor print as in the picture above, change filament at the desired height.
Do you like it?
If you have printed this design and you like it, I would be happy if your make is uploaded.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Loud and compact Whistle for your Keychain
Tiny Emergency Whistle - extremely loud
Flat Pocket WhistleAbout the Whistle: With a thickness of only 3 mm, the flat whistle fits in any wallet. Despite its flat design, it's really loud.
Ultimate Referee WhistleLet me introduce my newest whistle design, the Ultimate Referee Whistle . What makes this whistle outstanding: extremely loud and far-reaching, piercing triple tone, high side walls for perfect finger...
Tiny Emergency Whistle - incredibly loud!Tiny, sturdy and incredibly loud keychain emergency whistle, only 40 x 18 x 6.4 mm in size.
2-in-1 Dog WhistlesMy newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here .
2-in-1 Whistle (Dog + Standard)
WhistleCompletely redrawn model based on the original design. Removed the JP inscription for a cleaner look. Improved the sound‑producing edge by sharpening the airflow strike point inside the whistle Extended the mouthpiece section and added a...
the whistle - 1g loud dual note keychainsimple, but loud two tone keychain. due to about 4kHz + 4,75kHz combination extremly noticeable and loud.
Small WhistleA small easy to print two tone whistle. Print instructions Layer height 0,15 No supports.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.