MakerWorld
2019 - 2023 Honda CB500F Front Winglet (2 styles)
- Creator (as listed at the source)
- Embrace Making
- Licence
- BY-NC-SAStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Vehicles
- Likes
- 5
- Downloads
- 1
Overview
There seems to be a shocking lack of 3D models for the CB500F… so I made a front winglet. Should fit the 2019 - 2023 models - maybe also the CB500X?
There are two styles. One is more subtle and a bit smaller (pictured in green). The wing tips on this one are inverted shape. The other style is slightly larger and is more “arrow” shaped (pictured in grey). If you want an even bigger and more extreme version let me know, I might be able to do something more.
Both styles mount to the trim under the front headlight. There is a central screw that is re-used from the original bike. There are provisions on the winglet for two more #6 thread forming screws. See the link below for a compatible screw. You will need to pre-drill a small pilot hole in your headlight cover to get the screw to thread in and bite. Use the winglet as your template to mark the hole location.
Alternatively, if you don't want to drill the holes, you can line the two side surfaces with some 3M double sided tape and just re-use the center screw. Recommended tape below:
Print in something heat resistant. I have included two print profiles, one for PCTG and another for ABS. ASA would likely also work, maybe even PETG.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Cafe Racer Twin MotorcycleThis is a customization and fix of a few different Cafe Racers Things. I took what I liked from each, modified some, repaired some, and created some completely new pieces to suit my vision.
Cafe racerI made this one a long time ago and had to make again a few parts to upload it here. Print it at minimum 200% to have better results with the thinner parts.
Jawa 50/23 Mustang
Honda DaxCard to pop out and assemble a Honda dax
Bike multipartBased on the Honda Twister 250 Design Concept: This model represents a detailed motorbike and is designed to capture the essence of a dynamic two-wheeled vehicle.
FIGURE BANDIT 650 SUZUKIDesign Concept This model is inspired by the Suzuki Bandit 650, a popular street motorcycle known for its sporty design and strong inline-four engine.
Project: Open Cbf 150Cbf 150'yi Açık kaynaklı yapmak için uzun bir yola çıktık. dosyalar gelecekte güncellenmeye devam edecek.
Motorcycle Paddock Stand Spools / BobbinsJust some motorcycle paddock stand spools / bobbins that you can fix onto your swingarm with 2 x M6 x 25/30/35 screws with cylindrical head. They look like the Evotech Performance model.
right side emblem for Honda cx500Honda cx500 right side emblem
96' CB750 Nighthawk Panels and modelthese are 3d scans from my 96 CB750 nighthawk, they are not neccisarily ready to print they are the raw scans.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.