Prusa i3 MK2/S/3 Filament Guide ClipOn

IMPORTANT: Get the latest updates for this model here on PrusaPrinters. In 2021, all updates and uploads of new models were moved to PrusaPrinters, of course still free and under the same conditions... :) The *Prusa i3 MK2/S/3 kit* comes without a filament guide - this is a problem when using stiffer filaments on small spools. The filament tend to unwind and get stuck when printing. My filament guide is a two part solution, a base with a new ClipOn design to lock the guide to the Prusa frame and an interchangeable filament guide (loop). The ClipOn Holder (base) it is securely locked to the aluminum frame, but still easy to re-position. The loop has a friction fit into the holder that closes the filament loading slot and prevents the filament from escaping the loop when printing. Selecting models: + Select a ClipOn Holder rectangular or angled. Angled version will prevent collisions in top Z positions. + Select a Loop size and if it should have filament slot. If you often forget to put the filament through the guiding loop when loading the hot end, the guide with filament slot is the solution. The thin part of the ClipOn base acts as a spring but is strong enough the securely hold the top part in place. I tested with PLA and PETG and both materials works great. Let me know in the comments if you have ideas or changes to the design. *Update:* Added Filament Guide Dust Clearner for ClipOn base Don't forget to like it, if you like it...