Creality Cloud
SCRAPER / WIPER WITH CHANGEABLE BLADES
- Creator (as listed at the source)
- HansN
- Licence
- CC BYStated at the source marketplace; SliSearch does not verify licences.
- File types
- The marketplace does not list the file types.
- Pricing
- Free
- Published
- Category
- Tools & Spare Parts
- Likes
- 196
- Downloads
- 327
Overview
I made this scraper with the same handle as my spare file handle. The blades are changeable and clamp in place with a small ridge
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
STACKABLE BINS ORGANIZER MINIThis is a smaller version of the original design. Could be useful to keep small parts in order. Dimensions: 80 mm x 80 mm There are four different heights for the same layout: 8 mm 11 mm 16 mm 21 mm The same set was created with handles...
STACKABLE BINS ORGANIZERIt was designed to keep my electronic parts organized. However, it could be used for different items as well. I hope you will find it useful in your household.
Modern FunnelModern funnel for pouring all kinds of liquids with an air channel. Base diameter 110 mm, height 125 mm. Easily scalable in slicer. Tested in sizes from 50% to 150%, with PLA, PETG, ABS and PA(Nylon) filaments.
Spring Factory 1.2Instant springs with this 9 grams (0.30 oz) spring factory. Works with 0.8mm to 1.5mm "normal" steel wires and 0.8 to 1.2mm piano wires.
Hexagon(hex key) handle "snap-lock" wedge design Allen Wrench with modular holders, complete set 1.3mm through 10.0mmThese are tight fitting handles that feature a "wedge-lock" design. These parts shouldn't require any post processing at all, just print the parts and seat the Allen wrench by pulling it tightly into the wedge.
Spring Factory
My Personal Spool DrawerI was inspired by the 3dlio model but by noticing that it was not the right height for my spools I redesigned it totally and not to throw the already printed drawers I added intermediate.
RC Pocket Boats - Simple Print & Build!Pocket Boats! I decided to design a simple cartoony egg-boat to be run off the bare minimum of electronics. This uses two metal gear micro servos, two 18650 batteries, and a receiver. It doesn't get much simpler than that!
Slim profile scope mountsSlim profile rifle scope mounts and red dot sight mount for Picatinny rails. Designed to be stiff, lightweight, strong and easy to print. Safe to use without sharp edges.
Allen Key HandleThis is a universal handle for every allen key you have. The file is for 1mm size key. If you need a handle for a 3mm key you only need to escale it by 3. The key can be easily installed and desintalled on the handle with a clic.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.