Cults3D
These arent perfect as it was my first go at creating a design but they work great Wall mounts for the alluminium panniers for a triumph tiger motorbike, mine is an 800 xrt I did also fit a piece of wood across the bottom just to keep the panniers vertical and without putting too much strain on the mounts
Chosen by shared tags first, then category. Each one links to its own marketplace.
I always wondered where to put the cover of the LP I was playing. It winds up sitting on the table or floor, collecting dust and not being appreciated for its art. This is the "Now Playing" display for your turntable rig!
File types: STLLicence: Attribution
ThingiverseFreeRemix of mdihle's Milwaukee M12 Tool Wall Holder. I took the Angle and straight single mounts and make them into 3 gangs to use less wall space. Used the same settings as mdihle.
File types: STLLicence: Personal use only
ThingiverseFreeBased on SnakeEyes (Now Playing - Vinyl LP Wall Display Mounts) Link - I wanted to display my vinyl without screwing holes into my walls. During one short trip to my local DollarTree, I came across some poster tack, figured I'd try it.
File types: STLLicence: Attribution
ThingiverseFreeThis is a remodelled Version of Remixed:1918365 - with better strength and more reliability on the thinner edges. It is stable for screwing to a wall and easily holds 300-500g - if you like even more.
File types: 3MF STLLicence: Personal use only
ThingiverseFreeDecor your house everywhere! If you wanna check out more desings: If you wanna send a gift: If you want to wear these desings on clothes, phones cases, mugs, posters...
File types: STLLicence: Personal use only
ThingiverseFreeThe shelf support brackets even when printed with PLA can hold over 100 lbs (tested) and have built-in mounting holes to attach to the wall.
File types: STLLicence: Personal use only
PrintablesFreeDownloaded this as a silhouette from 3d warehouse, gave it some thickness and job done. Can be stuck up on the wall or used as a stencil.
File types: STLLicence: Attribution
ThingiverseFreeWall mounts for Lego technic cars: Porsche 911 GT3, Bugatti Chiron, Lamborghini Sian, and Ferrari Daytona.
Licence: Attribution
Creality CloudFreeHi everyone! I have designed some mounts for the Xbox One, Nintendo Switch (Pro controller), and Playstation 4 controllers. These can attach to the wall via command strips or screws, it's up to you.
File types: 3MF STLLicence: Personal use only
PrintablesFreeFound a good picture of a tiger and remodeled it to a 3d model. The tigers picture was shot mid jump. The model is fully connected and thus printing friendly.
File types: STLLicence: Attribution
ThingiverseFreeI designed for the home theater system, Sony SA-VE835ED. 45 degrees 2-axis. It is manufactured in Vertical Machining Center, 10000rpm I used aluminum 5000 series materials. Total weight except for bolts: about 250 g.
File types: STLLicence: Attribution
ThingiverseFreeI found a nice 3D scan of a Vietnamese bas-relief of a tiger. 123D Catch scans aren't 3D printable because they are surfaces, no solids - so I put in some work to make this printable.
File types: STLLicence: Personal use only
ThingiverseFreeThe print setting for the lightsaber wall mounts was created with Creality print 6.0 slicer with 2 pauses at 3mm and again for 17mm that is how I did it with 2 different colors printing with my Creality Ender3 V3 KE .
Licence: Personal use only
Creality CloudFreeDetailed 3D model of a tiger's head designed to be mounted on the wall. Perfect for adding a touch of the wild and elegance to any space. Suitable for 3D printing and easy to install
Licence: Marketplace terms
Creality CloudFreeSi vous voulez vendre mon travail, vous pouvez me contacter pour un paiement unique et je vous ferai une autorisation de vente. Boost Me Un simple clic sur "Booster" m'aide énormément — sans aucun coût pour vous !
File types: STLLicence: Marketplace terms
MakerWorldFreeI couldn't accept spending money on a rear mudguard for my motorcycle. The cheapest was around 60€ and the most expensive was over 200€. So I made a simple mudguard that will help keep the rear suspension cleaner.
File types: STLLicence: Personal use only
PrintablesFreeMounts for both standard and fast charger Small: Standard Charger (Model: FY4804000) Large: Super/Fast Charger (Model: FY5464000-2) Note: although the model numbers match a generic ebike charger, I've only been able to test these with the...
File types: STLLicence: Personal use only
PrintablesFreeThese are heavy duty hooks for metal garage shelves that have circular holes. 25mm - 100mm sized hooks.
File types: STLLicence: Personal use only
PrintablesFreeThis wall lamp prints in four colors. It's only 12 color swaps, so waste is minimal plus it's not insurmountable to print this on a single color printer with manual swaps. Add an LED puck light to the inside and you're ready to go.
File types: 3MFLicence: Personal use only
PrintablesFreeThese mounts are made for a DERYA DY12 style shotgun. there is a front and a rear mount. the rear mount fits onto the stock shaft .
File types: STLLicence: Attribution
ThingiverseFreeA few mounts for JBL Partylight Stick Send me a message if you have another idea for a mount you want The wall mount has holes on the sides for the USB cable and can be mounted upside down high up on the...
File types: STLLicence: Personal use only
PrintablesFreeAnother simple, camera base, pocket wall mount for the Wyze Cam V2. This design adds a wire hanger bar to attach POE USB and ethernet adapters. Such adapters are usable via open-source firmware.
File types: STLLicence: Personal use only
PrintablesFreeA handy 3 liter hard storage case that mounts right where the left-hand side panel goes on a Triumph Scrambler 1200
File types: 3MF STEP STLLicence: Marketplace terms
PrintablesFreethey can stick to your wall; I have made 1.0 and 0.7 sized ones, they have about 1mm leeway as the 1.14mm pick still fits in the 1mm holder
File types: 3MFLicence: Attribution
PrintablesFreeHabe dieses Modell entworfen da ein Freund eine Tiger 900 fährt und es Ihn gestört hat dass er immer Nass wird .
File types: STLLicence: Personal use only
MakerWorldFreeI made a set of basic wall mounts which you can slot your RC Wheels into Sizes covered - Total Diameter of wheel (ie.
File types: STLLicence: Public domain
PrintablesFreeSee more designs here: 🖼 Transform Your Space with Stunning 3D Wall Art Add depth, personality, and visual interest to any environment with our premium 3D wall art designs.
ThreedingPaidSee more designs here: 🖼 Transform Your Space with Stunning 3D Wall Art Add depth, personality, and visual interest to any environment with our premium 3D wall art designs.
ThreedingPaidTiger 2D Decoration 3D file format: STL 3D model size: X 185 × Y 99 × Z 5 mm
ThreedingPaidNetgear gs305p POE Switch Dog Ear Mounts I printed these in ABS with supports.
File types: STLLicence: Attribution
ThingiverseFreePrinted in PETG 0.2 mm layer height, 3 walls for more stability and 30% infill.
File types: 3MF BGCODE STLLicence: Personal use only
PrintablesFreeSee more designs here: 🖼 Transform Your Space with Stunning 3D Wall Art Add depth, personality, and visual interest to any environment with our premium 3D wall art designs.
ThreedingPaidTriumph Bonneville Bobber Ce modèle 3D de la Triumph Bonneville Bobber, mesurant 5,7 x 10,8 x 0,4 cm, capture parfaitement l'esprit du style bobber emblématique de la marque Triumph.
ThreedingPaidTriumph Speed Twin Plongez dans l'ère de l'élégance et de la puissance avec cette silhouette distinctive de la Triumph Speed Twin, mesurant 13.1x19.2x0.4 cm.
ThreedingPaidSliSearch lists public model details and links to the original source. It does not host files or verify licences.
