Printables
7/8-Inch Tube Notching Template Set | 15°–90° | 8 STL
- Creator (as listed at the source)
- HighTest
- Licence
- Standard Digital File LicenseStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Paid
- Published
- Category
- Automotive
- Likes
- 1
Overview
Mark repeatable notches for chassis work, bumpers, small tube structures, and general fabrication using 7/8-inch OD tubing. Each guide wraps around the tube and provides a chamfered Sharpie-marking edge.
INCLUDED
• 15°, 22.5°, 30°, 45°, 60°, 67.5°, 75°, and 90° templates
• Approximately 0.008-inch fit clearance
• Eight STL files only — no STEP or CAD source files
PLA works for normal marking use; PETG offers greater shop durability. Verify fit before cutting metal.
Digital STL files only. Tubing and printed parts are not included.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
1-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches for chassis work, small tube structures, and general fabrication using 1-inch OD tubing. Each guide wraps around the tube and provides a chamfered Sharpie-marking edge.
2-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches for roll cages, bumpers, chassis work, and general fabrication using 2-inch OD tubing. Each guide wraps around the tube and provides a chamfered Sharpie-marking edge.
1-5/8-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches for roll cages, bumpers, chassis work, and general fabrication using 1-5/8-inch OD tubing. Each guide wraps around the tube and provides a chamfered Sharpie-marking edge.
1.5-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches for roll cages, tube bumpers, chassis work, and general fabrication using 1.5-inch OD tubing.
1.75-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches for roll cages, bumpers, chassis work, and general fabrication using 1.75-inch OD tubing. Each guide wraps around the tube and provides a chamfered Sharpie-marking edge.
1-7/8-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches for roll cages, bumpers, chassis work, and general fabrication using 1-7/8-inch OD tubing. Each guide wraps around the tube and provides a chamfered Sharpie-marking edge.
1.25-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches for roll cages, bumpers, chassis work, and general fabrication using 1.25-inch OD tubing. Each guide wraps around the tube and provides a chamfered Sharpie-marking edge.
2.5-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches for exhaust, chassis, bumper, and general fabrication work using 2.5-inch OD tubing. Each guide wraps around the tube and provides a chamfered Sharpie-marking edge.
9° Tube Pie-Cut Marking Jig Set | 1–4 Inch | 18 STLCreate consistent 9-degree pie-cut sections for exhaust, intake, turbo, and general tube fabrication. Each guide includes alignment notches 90 degrees apart to help keep successive marks indexed around the...
Tube Notching Template Set | 8 OD Sizes, 15°–90°Build repeatable roll-cage, tube-bumper, chassis, and fabrication joints without relying on paper templates.
3/16-Inch Tube Notching Template Set | 15°–90° | 8 STLMark repeatable notches in 3/16-inch OD tubing for small-scale fabrication, modelmaking, and detailed workshop projects. Each guide provides a chamfered marking edge.
1.75-Inch Tube Cutting & X-Pipe Marking Jig Set | 5 STLBuild repeatable exhaust, turbo, intake, and X-pipe sections from 1.75-inch OD mandrel-bent tubing. The upper and lower guides can be used for Sharpie layout or as a bandsaw cutting jig.
2.75-Inch Tube Cutting & X-Pipe Marking Jig Set | 7 STLBuild repeatable exhaust, turbo, intake, and X-pipe sections from 2.75-inch OD mandrel-bent tubing. Use the upper and lower guides for Sharpie layout or as a bandsaw cutting fixture.
3.5-Inch Tube Cutting & X-Pipe Marking Jig Set | 11 STLBuild repeatable exhaust, turbo, intake, and X-pipe sections from 3.5-inch OD mandrel-bent tubing. The upper and lower guides can be used for Sharpie layout or as a bandsaw cutting guide.
4-Inch Tube Cutting & X-Pipe Marking Jig Set | 7 STLBuild repeatable exhaust, turbo, intake, and X-pipe sections from 4-inch OD mandrel-bent tubing. The upper and lower guides can be used for Sharpie layout or as a bandsaw cutting jig.
2.5-Inch Mandrel Tube Bandsaw Cutting Jig | 3 CLR Sizes | 5 STLCut repeatable angles from 2.5-inch OD, 180-degree mandrel U-bends for exhaust, turbo, intake, and general fabrication work. The common base accepts three upper inserts for popular centerline radii.
2-Inch Tube Cutting & X-Pipe Marking Jig Set | 5 STLBuild repeatable exhaust, turbo, intake, and X-pipe sections from 2-inch OD mandrel-bent tubing. Use the upper and lower guides for Sharpie layout or as a bandsaw cutting fixture.
3-Inch Mandrel Tube Bandsaw Cutting Jig | 9 CLR Sizes | 11 STLCut repeatable angles from 3-inch OD, 180-degree mandrel U-bends for exhaust, turbo, intake, and general fabrication work. The common base accepts nine upper inserts for popular centerline radii.
1.5-Inch Tube Cutting & X-Pipe Marking Jig Set | 5 STLBuild repeatable exhaust, turbo, intake, and X-pipe sections from 1.5-inch OD mandrel-bent tubing. The upper and lower guides can be used for Sharpie layout or as a bandsaw cutting jig.
1.500" Exhaust Header Fabrication kit - Snap kitA 1.5" version of my popular 1.625" header mockup kit Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend.
2.00" Exhaust Header Fabrication kit - Plastic Snap kitSame design as my 1.625 header fabrication kit. Identical snap system. These 2.000 parts will snap onto the 1.625 parts. Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend.
Tubing Contour GaugesThis is a 3D printed version of the PipeMaster tubing contour gauge. Each PipeMaster is about $50+, this can be made for $11 or less. Simply order 5pc 2 mm x 500mm rod on eBay; quantity depends on how you cut them.
GM LSx Header Flange for Snap-Together Header Fab KitThis is a bolt on flange for GM LSx engines that have the same snap-features that XeonDesigns uses in the snap together header fabrication kits.
1-5/8-Inch Roll-Cage GoPro Mount Set | 4 STLAttach a GoPro-style action camera to 1-5/8-inch roll-cage tubing. The set includes alternative lower mounts for common two-tab and three-tab accessory arrangements.
Dragy GPS Holder | Roll-Cage & Visor Mounts | 3 STLMount a Dragy GPS performance meter to a 1-5/8-inch roll cage or a vehicle visor. A square interface between the holder and lower mount lets you choose the most useful orientation.
AN Fitting Protective Cap & Plug Set | -3AN to -20ANProtect expensive AN fittings during storage, fabrication, cleaning, and assembly. This printable set includes a male cap and female plug for each common size so grease, dirt, metal chips, and shop debris stay away from the sealing...
Automotive Tools Shop Equipment
1.625" Exhaust Header Fabrication kit - Plastic Snap kitFinally, custom header fabrication is easy to do with the help of your 3d printer. No more spending over 4 figures for a plastic snap kit you might use once or twice.
1.750" Exhaust Header Fabrication kit - Snap KitSame design as my original 1.625 header fabrication kit. Identical snap system. These 1.750 parts will snap onto the 1.625 parts. Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend.
2.5" Exhaust bend snap fabrication kitFinally a simple way to mock up and layout custom exhaust designs. I designed this system similar to my header fabrication kits. Makes exhaust system planning and layout a breeze.
Coping TemplateThis is a coping template that you slip over tube and mark the profile to cut and join tube at an angle. Fusion 360 file.
Cutting templates for 60.3mm R76, 76.1mm R95, 63.5mm tubesThese templates facilitate cutting 90° bent tubes to create exhaust lines These templates allow for cutting bent tubes of - 60.3 mm diameter, bent with a 76 mm radius - 76.1 mm diameter, bent with a 95 mm radius - 63.5 mm diameter, bent...
Exhaust Header Fabrication kitKoncepcja projektu Zestaw do produkcji kolektorów wydechowych został stworzony z myślą o odtworzeniu wyglądu i funkcjonalności kolektorów wydechowych w samochodach. Jest idealny dla entuzjastów motoryzacji i osób uczących się motoryzacji.
SCH 10 Merge Collector JIG 20 Degree
Magnetický držiak elektród MMA 350 mm pre zváračov🧲 Magnetický držiak elektród MMA 350 mm | Dvojkomorový organizér pre zváračov Boost Me Ak si model vytlačíš, budem veľmi rád za hodnotenie, fotografiu hotového výtlačku alebo návrhy na ďalšie vylepšenia.
5in Speed Square With Corner Removed5in Speed Square With Corner Removed Used a Swanson speed square and “Replicated” it in tinker cad with a few modifications and designed this.
Welder Railing Fabrication Industrial Torch Worker Metalwork
Fabrication SquaresFabrication Square A fresh take on the everyday carpenter’s square, redesigned with metal fabrication at the forefront.
Curved Connecting Hose Injection Mold 3D CAD ModelThis high-quality Curved Tube Core Injection Mold 3D CAD Model is professionally engineered for manufacturing automotive intake connecting hoses and curved plastic air duct components used in modern vehicle intake systems.
Metric Square Tube Centering & Drill Guide Kit - 20-60 mm - Replaceable InsertsN58-SDG-001 is a modular digital fabrication kit for metalworking layout and workshop prototyping. INCLUDED • 6 open saddles: 20, 25, 30, 40, 50 and 60 mm • 6 end-stop saddles: nominal 30 mm hole centre from tube end • Replaceable Ø4, Ø5...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.