Printables
BC250 All In One Frame
- Creator (as listed at the source)
- Earstorm
- Licence
- Creative Commons — Attribution — NoncommercialThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Computers
- Downloads
- 22
Overview
A small plastic based frame to hold the BC250, PSU, and Power Button in one place.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
A simple, toolless case for the BC250. Who knows how bad the thermals are! Printed in PLA, it's probably fine. The build assumes the center fins of the card have been opened up to accept a fan.
File types: 3MF STEP STLLicence: Personal use only
PrintablesFree
A very solid, and attractive looking AIO Mount for the BC250 Single Board Computer
File types: 3MFLicence: Personal use only
PrintablesFree
This Dell Server PSU mount is intended to be used with NexGen3D's BC-250 REDUX v4.1 case. The original design was taken from ntsanov's HP Server PSU mount and modified for a Dell E495E-S1.
File types: 3MFLicence: Personal use only
PrintablesFree
File types: 3MFLicence: Personal use only
PrintablesFree
You must use ABS, ASA, or PC for this. The bottom heat inserts are M3, and the top are M4. The washers go directly under the heatsink.
File types: STEPLicence: Public domain
PrintablesFree
- Verrry light version of guerrilladrone's mullet mode canopy
File types: STLLicence: Attribution
ThingiverseFree
Simple bracket for aio cooler. Cooler's steel bracket requires modification. Caution, it is hardened steel, really hard to drill through. The model is ready for press in threaded inserts M3x3.5x4.6x6 Print with PETG for the least.
File types: STLLicence: Personal use only
MakerWorldFree
📤 Prusa i3 MK3 Frame Organizer / Cup (Over-Power-Supply Mount) A practical, slide-on frame organizer designed specifically for the Prusa i3 MK3/S/+.
File types: 3MFLicence: Public domain
PrintablesFree
Just some cable combs to get your custom PC cables nice and tidy. The pack has pretty much all the sizes you are gonna need, you can also download them individually. Hope you find it useful.
File types: STL
ThingiverseFree
Fully 3D Printable Mini ITX computer case. FULL VIDEO: Features: - Graphics Cards up to 270mm - Bottom to top ventilation - Mounts for ATX power supply (depth max 125mm) - Mounts for 3.5" HDD - Unique clean design...
File types: STLLicence: Attribution
ThingiverseFree
File types: STLLicence: Attribution
ThingiverseFree
Frame holder for the GoPro Hero3 Black Edition camera. Openings for USB and SD card, both mics (Placement different between Black and Silver Editions!), shutter release and WiFi button.
File types: STL STPLicence: Personal use only
ThingiverseFree
This is my Emergency- and Recovery-kit based on a Pi 4 and the official 7" touchscreen. The case is designed and 3D-printed by myself, though i got some inspirations of r/cyberDeck and back7.co Because the price of the pelican cases is...
File types: STLLicence: Attribution
ThingiverseFree
This is a simple remix of the GoPro Frame: by GoPro_3d. A few change have been made to fit perfectly the 4 Silver, some minor issues bother me enough to adapt the well designed frame to make it perfect: - Cut out on the lower left backside...
File types: STLLicence: Attribution
ThingiverseFree
Open frame computer case for full size ATX motherboard. Lightweight to keep you mobile for that on the go gaming.
File types: STLLicence: Attribution
ThingiverseFree
This is a frame kit for the 1st Generation iPad. I had an old iPad sitting in a draw for years and decided to turn it into a smart mirror using a mirror screen protector. So I made this frame kit for it.
File types: STLLicence: Attribution
ThingiverseFree
This is the simplest mount for the GoPro 3+ that I can made. The differences with other are: * This have all the holes need for Gopro3+ * It is possible put and quit the side cover * It uses the side insert to lock the camera in It is...
File types: STLLicence: Attribution
ThingiverseFree
Moin Moin, a cable comb for the bequiet! 20+4-pin ATX cable (Power Cable CB-6620). I think it only works with the specified bequiet! cable because they use a different thickness and some pins are occupied with 3 cables.
File types: F3D STLLicence: Personal use only
ThingiverseFree
File types: IPT STLLicence: Personal use only
ThingiverseFree
Corsair Individually Sleeved Cable work in progress updated 11/7/2015
File types: STLLicence: Attribution
ThingiverseFree
I've created this horror for my Lan nights and used a few things to cobble this jank together. it works for me.. maybe it will work for you? probably not "But..
File types: STLLicence: Attribution
ThingiverseFree
This is an adapter to mount a small form factor (SFX) power supply (PSU) onto a PC case or anything that fits an ATX power supply. Useful when building a small PC but want to test the PSU on an existing full-size PC.
File types: STLLicence: Attribution
ThingiverseFree
Keeps loose 4-pin Molex power connectors in your PC from shorting against the case or other components.
File types: SCAD STLLicence: Attribution
ThingiverseFree
Inspired by dr_badger's "Square rotating wall clock" I made my own smaller version to fit my Finder's 140mm maximum print size. Works great, looks weird. Office colleagues hate it. Make yours today! The "skirt" part is optional.
File types: F3D STLLicence: Attribution
ThingiverseFree
Creality Cloud
Remix of Marfusio's GoPro Hero3 mounting frame (Black Edition) to fit the Hero 4 (Black). Tested and does fit GoPro well, also GoPro screw mounts. Way better than paying the $40+ for similar parts!
File types: STLLicence: Attribution
ThingiverseFree
This is an open frame modular chassis design for a mini-ITX based NAS or home server. The chassis measures 30.4 cm 22.8 cm x 22.8 cm and can take: - An ATX PSU - A mini ITX motherboard - Up to 5 x 3.5" HDDs (bracket holes are spaced for 1...
File types: STLLicence: Attribution
ThingiverseFree
This is my take on a mini stx Louqe Ghost S1. It houses a mini itx motherboard and a pico psu. I have found if you take the shroud off an ssd it will tuck in the back.
File types: STLLicence: Personal use only
ThingiverseFree
A Gopro vertical frame for vertical filming for phone apps like TikTok, Instagram... For Gopro Hero 5, Hero 6, Hero 7 Black and Hero 2018. >Holes for buttons and connectors >Robust >Easy to use
File types: STLLicence: Attribution
ThingiverseFree
This a design I made to build a custom frame made of 10x10mm aluminium hollow square bars (6x 1m needed). Corner slots are provided for first simple build of the frame.
File types: STLLicence: Attribution
ThingiverseFree
Fusing old and new technology for storing memories. Turning digital into analog with 3d printing. See it in action here Bracket includes : 4,5,6,8,9,10,12 sides (can be mix and match) Lithophane instructions : - Head over to - Tips for...
File types: STLLicence: Attribution
ThingiverseFree
Follow the collection for new rack modules and updates Labrax 1U Rack Reinforcement Connector This is not just a rail connector—it's a structural reinforcement for the Labrax rack.
File types: STLLicence: Marketplace terms
MakerWorldFree
35mm spacer to allow for a radiator, larger PSU etc, to suit a Cooler Master NR200 case. Version 2 now available, includes 280mm radiator option: Makes use of the existing lid Relocates front I/O (USB ports, power & reset buttons, 3.5mm...
File types: STLLicence: Attribution
ThingiverseFree
GoPro style frame for the Xiaomi Yi action camera with some level of lens protection.
File types: STLLicence: Personal use only
ThingiverseFree
This is a simple test bench fitting a Mini-ITX (17 x 17cm) motherboard and an ATX power supply in vertical position.
File types: STLLicence: Personal use only
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.