Thingiverse
Gyro Spinner For MPSM (keyless)
- Creator (as listed at the source)
- TrunkFullaAmps
- Licence
- Creative Commons - AttributionThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
Overview
My extruder post is not keyed, so I removed the flat spot from the inside of the original cylinder. While I was editing it, I also adjusted the tab slot to fit without needing to shave the tab down. This version has a 0.2mm clearance on each side of the tab slot and mine fit perfectly on the first try. Maybe I got lucky..
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
This collection of things combines to form a E3Dv6 Hotend mount for the Monoprice Select Mini (Malyan M200) 3D Printer.
File types: STLLicence: Personal use only
ThingiverseFree
WK9 Extruder MPSM V2 Extruder Replacement. Wiley Kyoto _ This is an upgraded extruder meant to work with the MPSM V2 stock hardware (mid 2017 - 2022? See Version Compatibility Note below).
File types: STLLicence: Personal use only
ThingiverseFree![MP Select Mini X Gantry Support + Camera Mount [Reinforced and Realigned], a preview image from Thingiverse](/previews/thingiverse/1864625-0/card-cd38550170b53ad7.webp)
MP Select Mini Gantry Support This is a remix of the support pylon for FDM_Guru's excellent X Gantry Support System for the Monoprice Select Mini 3D printer.
File types: STLLicence: Attribution
ThingiverseFree
I was jealous that other 3D printer users had their own filament sensor accessories, and I thought it was about time for a Monoprice Select Mini user to have make it happen!
File types: STLLicence: Attribution
ThingiverseFree
I liked the camera mount from thing:2267182, but I didn't have any M2 screws and the local stores didn't have them in stock. Since I didn't want to wait to have them delivered, I adapted the screwless case from thing:92208.
File types: STLLicence: Attribution
ThingiverseFree
This is an extruder spinner designed for the MP Select Mini v2 extruder knob. It was remixed from the above file sized to fit the extruder.
File types: STLLicence: Attribution
ThingiverseFree
Simple Extruder Spinner for the mini. >35min print! (varies per your settings).
File types: STLLicence: Attribution
ThingiverseFree
Fully Adjustable Z Spacer MP Select Mini By Wiley Kyoto _ This Z spacer is designed to give you continuous adjustment from 1mm to 5mm.
File types: STLLicence: Personal use only
ThingiverseFree
I created this extruder spinner for my Monoprice Select Mini v2 inspired by a similar design. Rather than remix the design I saw, I came up with my own as an excuse to learn Tinkercad and to make the parts easier to print.
File types: STLLicence: Attribution
ThingiverseFree
Street Fighter (Ken) spinner for MP Select Mini or other bowden type extruders
File types: STLLicence: Attribution
ThingiverseFree
Do you make mods for the MPSM and find it pain having to constantly reference your printer to dimensions, or worse, have to keep taking it apart to recheck some internal dimensions?
File types: F3D F3Z IGES STEPLicence: Personal use only
ThingiverseFree
Fab365
Designed this gyro keychain in Inventor as a gift for my friends. The keychain prints in one piece, and consists of three rings encircling a center hub. The rings are 3mm thick and spaced 0.6mm apart.
File types: STLLicence: Attribution
ThingiverseFree
Inspired by hitechguy2000's axis cover , I thought I definitely need a mini spool as an extruder visualizer for my sprite extruder.
File types: STLLicence: Personal use only
PrintablesFree
A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm
File types: STLLicence: Personal use only
PrintablesFree
Simple Pokeball Extruder Spinner, 15mm in diameter. More extruder spinners to come! Comment with what you'd like for me to design.
Licence: Personal use only
Creality CloudFree
Add an extruder visualizer to your 3D printer it's cool way to pimp your 3d printer. Quick print, print with supports. 0.4 mm nozzle, 0.2 mm layer height.
Licence: Personal use only
Creality CloudFree
Extruder spinner, peace symbol. Add a 6mm diameter round magnet, eventually some glue. I set a pause after a few layers and changed to black filament. If you like my work, consider buying me a coffee:
File types: 3MF STEP STLLicence: Personal use only
PrintablesFree
Find the dial this printer came with a pain in the butt to use? Here's a replacement dial that's much easier to use. The hole at the bottom is made to be snug, don't want that slipping off. To install, remove old dial.
File types: STLLicence: Attribution
ThingiverseFree
These stabilizers will fix the loose rods in the Z-Axis of the Monoprice Select Mini 3D Printer. This is part of an ongoing project to upgrade the Mini on a budget!
File types: STLLicence: Personal use only
ThingiverseFree
This is a upgrade to the stock extruder base plate of the MP Select Mini 3D Printer. Watch the detailed installation guide on YouTube.
File types: STLLicence: Personal use only
ThingiverseFree
A customizable spacer for the monoprice mini allowing you to print a spacer that clicks onto the z block. This allows you to add any glass thickness to your bed and effectively move your z zero point up to match.
File types: SCAD STLLicence: Personal use only
ThingiverseFree
Inspired by hitechguy2000's axis cover, I thought I definitely need a mini spool as an extruder visualizer for my sprite extruder.
File types: STLLicence: Personal use only
ThingiverseFree
Just a fancy indicator for visual check of the Extruder movement
File types: SLDPRT STLLicence: Attribution
ThingiverseFree
This is a upgrade to the stock extruder arm of the MP Select Mini 3D Printer. Watch the detailed installation guide on YouTube.
File types: STLLicence: Personal use only
ThingiverseFree
I loved the look of Ardjan's non-flat hamster extruder indicator, but when I read they downgraded a Pikachu model to create the hamster I felt that an incredible opportunity was missed.
File types: STLLicence: Attribution
ThingiverseFree
A spiral to put on your extruder gear to visualize it's movement. As the spiral branches overlap in your view, even very small movements become visible by shifting the place where they cross.
File types: STLLicence: Attribution
ThingiverseFree
The tool holder features space for your: - Micro SD to SD card adapter. - A 2.0mm hex key (adjusting the bed). - A 1.5mm hex key holder, really comes in handy when your extruder gets jammed.
File types: STL STPLicence: Personal use only
ThingiverseFree
File types: STLLicence: Attribution
ThingiverseFree
I realized that my MP Select Mini's prints were having some print warping issues due to the uneven cooling the stock fan shroud provided. I found Kenny_boy's design and really liked it, but I touched on a few things.
File types: STLLicence: Attribution
ThingiverseFree
I wanted to print a small spool for wrapping Makerbox filaments onto for printing, but all of the options I found were either too big for my little printer or took up at least 100g of filament to print.
File types: STLLicence: Attribution
ThingiverseFree
Just a small plaque to attach to the Monoprice Mini Select's gantry tower so those magical numbers are always right at hand.
File types: STLLicence: Attribution
ThingiverseFree
At what point does something stop being a "remix" and become its own thing? I don't know, but this design incorporates elements of thing 1636941, thing 1989704 and my own work added in 123Design and TinkerCAD.
File types: STLLicence: Attribution
ThingiverseFree
This object is supposed to reduce or stop the vibration coming from the hard edged spool holder on the Monoprice MP Select Mini or Malyan M200.
File types: GCODE STLLicence: Personal use only
ThingiverseFree
File types: STLLicence: Personal use only
ThingiverseFree
This is a spinner for the top of the Monoprice Select Mini. I have made a few but it was only when I was printing out the Death Star trophy that I realized how awesome this would be on top of my 3D printer and here we are.
File types: STLLicence: Attribution
ThingiverseFree
This is a dual fan hot end mount that replaces one piece of the original V2 hot end mount. You can use the original 30mm fan to cool the hot end and a standard 50mm radial (5015) for part cooling.
File types: STEP STLLicence: Personal use only
ThingiverseFree
An adjustable Z endstop for the Monoprice Select Mini / Mayan M200. No more need to adjust the bed level screws and install spacers if you are printing on glass, swapping nozzles, doing maintenance, or trying to fine tuning your first...
File types: STLLicence: Attribution
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.