Filament dryer mod for food dehydrator

3-4-19 There is now a single piece version for 330mm/13"+ print beds: 3-4-19 Glue up version prototype: Original: This is a riser for the common Rosewill/Best/Flexzion/Yobo food dehydrators. It holds 2 1KG spools. With this mod, you don't need to destroy your food trays to fit a spool. This dehydrator sells for about one third the price of the exact same filament dryer unit. They are two versions; a three and a four-part unit. The three-part panel is quite large. I've also included a 4 part STL including two of the 4 needed panels. It will print on a typical 8.4" bed. Ive included .5mm clearence on the pin shaft. If thats not enough you can scale the pins just in the x-y directions or drill out the holes a little. The pins are optional, you can substitute bolts or even zip ties. Here is a link to the machines: Rosewill Dehydrator Flexzion Dehydrator --- Your Support Appreciated: If you like my designs why not tip me a dollar or two. Your support will allow me to spend more time on these designs and their variations. Other ways to help: Purchase some parts from one of my amazon links. I will get a small advertising fee at no cost to you. Or try Amazon Prime free for 30 days: Thanks!