Thingiverse
ULTIMATE triple drawer for Ender 3 PRO - Easy mount
- Creator (as listed at the source)
- Skrycchio
- Licence
- Creative Commons - Attribution - Non-Commercial - No DerivativesThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 236
Overview
The creator did not write a description for this model.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Ender 3 S1 Pro Camera MountRemixed this camera mount for the Ender 3 S1 Pro. I redrew this file to fix a slicing issue I had with thin walls around the screw. This remix allows you to attach a webcam that uses ¼-20 threads to attach to mount.
Ender 3 Pro Camera MountCamera mount for Ender 3 Pro, Ender 3 and Ender 3 V2 Easy to adjust the camera position and easy to dismount if not needed. 3 parts, no extra hardware required. UPDATE: A new and shorter version of the arm is available.
Ender 3 BLTouch MountSpecial features The Extruder Fan Cover can be removed independently (no need to also remove the BLTouch mount), thus maintaining the probe Z offset Optimized cable placement. Small and sturdy design.
DRAWER FOR ENDER 3/ENDER 3 PRO/ ENDER 3 NEO
Ender 3 S1 Pro Camera MountMount for Ender 3 S1 Pro for various cameras
Ender 3/Pro/V2/Neo Extruder Top Mount 20º leftA 20° left angled extruder mount for the Ender 3 Pro's top frame bar, holding a BMG-style dual-drive gear extruder.
Ender 3 S1 / Pro Y-Axis Stepper Motor Mount - Best versionY-Axis Stepper Motor Mount for Creality Ender-3 S1 and S1 Pro Highly robust construction optimized for smooth operation and easy printing. I tried many iterations during development.
Ender 3 pro screw on tool cupEnder 3 pro screw on tool cup i made using a bracket from a model i remixed. this is only my 2nd model dont stare at it too long you will notice its a little wonky. but it fits and functions.
Creality Ender 5 (and Pro) Extruder Re-mount (UPDATED 1/23)Migrated to: UPDATED: I've re-created this in Fusion 360, and adjusted holes, modeled in screw-threads. Should be more robust, less prone to cracking or slipping.
Ender 3 Pro Double Drawer
Ender 3 light switch mountSmall & discrete mount for a rocker switch 6.5mm x 19mm) used to switch LED lights on/off. Designed to front-mount the switch unobtrusively on the side of the ender 3 control panel so that it is easy to reach and use, but also discretely...
Ender 3 X gantry mounted LED light strip mountX gantry mounted LED light strip mount designed for the Ender 3 and Ender 3 Pro. Will also fit onto any 2020 or 2040 etc strip, so can fit other printers, or mount onto other T slot rails: ie can fit onto the vertical rails of the Ender 3...
Creality Ender 3 Pro Dual DrawerI liked the original but had trouble opening them with the smaller handles. I recreated the drawers with an integrated top pull. There are divided and open versions of the top drawer, and I left the bottom drawer open.
Ender 3 / Pro / V2 Z axis motor mount - Ajusted fitThis a remix from the original design, as the former does not fit at all in my printer profiles. Adjusted around -0.5mm on the profile clamps. For those who might want to adjust even further, I leave here the Fusion 360 solid file.
Drawer box for Ender 3 V3 KE with display mountDrawer box for Ender 3 V3 KE with display mount. Top right drawer can either be printed as a nozzle box for 15 nozzles or as an empty box.
Ultimate Spool Holder for Ender 3, Ender 3 pro
Ender 3 / Pro / V2 Dual Z Axis Motor MountReally liked idea of Ender 3 / Pro / V2 Z axis motor mount by mknet. I have a dual Z axis system, so no frame mounting holes for right motor mount. Also noted that left frame mount slightly elevated stepper motor off of base frame.
Ender 3 LED light cable clipI made this clip to keep the wires for my gantry and hot end mounted LED light strips away from the Z lead screw and rollers, and also to conceal the wires. Simply slides onto the X gantry roller support bracket.
Ender 3 Pro - Station (LCD/Pi/Drawer Space/Steampunk Gears)I wanted something special for my Ender 3 Pro with some steampunk style and with personnalisation options and I finally remixed multiple models to get this.
Ender 3 Pro Wyze Camera MountWyze Camera Mount for Ender 3 Pro. Designed to mount using the two existing screws to provide a sturdy platform for a Wyze camera, just above bed level.
Ender 3 Pro - Rear PSU Mount- Print in the default orientation, no supports needed - Some hardware required (3 mounting screws/nuts) - You'll need to re-route some wires
Simple Ender 3 Pro Y Rail MountSimple Ender 3 Pro Y Axis Linear Rail Upgrade Note – This is for the Ender 3 PRO ONLY I was looking online for an easy way to upgrade the Ender 3 Pro to Linear rails on the Y axis.
Ender 3 Pro DrawerI downloaded several Ender 3 Pro compatible drawers. The problem they all have is the carriage bolts scrape or impact the drawer housing.
GEN2 Gridfinity Drawers V2 - STANDARDUtilize the combined power of Gridfinity and GEN2! V2 improves rigidity and extra storage
Spool Filament Holder & Guide Ender 3 V3 / V2 SE KEThe spool is rotated 90º with weight distributed evenly. The spool now sits above the gantry and directly in the middle which helps distribute its centre of gravity and allows the filament to roll directly down towards the extruder rather...
Creality Ender 5 Plus Orbiter V1.5 Direct Drive MountThe Ender 5 Plus does much better without the Bowden filament feed, replaced by a direct drive extruder mounted directly above the hot end and, importantly, with the centre of mass of the extruder balanced over the x-carriage, and this...
Ender 3 Pro MountA shorter version (10cm length) of remixed mount with a hole to attach a tripod mount.
GEN2 Under Table Starter Kit - 185⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs.
Ender 3 Bed Leveling Wheel ClipsReleased along side the original HomeGrown3D newsletter! HomeGrown3D.com Read our article about the version 2 clips: If you enjoy this model, give it a like so I can get more prusameters! Support free, and easy print! Print 2 of each.
Ender 3 S1 cable holder/guide | Pro | laser modulThe new version 04 allows to use the original holder of the laser module. For the assembly, the extruder must be disassembled by means of 4 screws and additionally 2 screws of the original cable...
Prusa MK3 MK4 Body Kit | The Bulletproof Wide Body | MK3 MK3.5 MK3.9 MK4 MK4SA visual upgrade for the Prusa MK3 and MK4 series!
K2 (not pro/plus) drawer baseSource models This is a remix of the following models: K2 Plus drawer Remix with printable rail by Jems K2 Plus drawer with build plates stand by d_v_ermakov Updates * 04.04.2026 - Wrong dimensions for melt-in thread inserts in...
Nebula Camera Mount in X Axis for Ender 3 V3 KEWith this mod, you can install Creality's Nebula camera on your Ender 3 V3 KE without the need for screws or additional
ENDER 3 BOX (COMPATIBLE ENDER 3 & ENDER 3 PRO)Malgré toutes les boites de rangement à installer sous l'Ender 3, je n'en trouvai aucune assez grande pour mettre la spatule.
Ender 3 V3 SE and Ender 3 V3 KE side spool mountingThanks to this mod for your Ender 3 V3 SE or Ender 3 V3 KE, you can place the filament on the side of your printer, either with 's mod or even with a dryer or portable spool holder.
X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)Some Ender 3 S1 and S1 Pro printers that ship have issues with getting a good first layer after auto bed mesh. This can be caused by the y axis not moving in a perfectly straight line (i.e.
Ender 3 Small ToolboxIntroducing The Small ToolBox for the Creality Ender 3. Ever wanted to stuff your 3D Printer's Accessories in one safe and reachable place? Well now you can!
Nebula Camera Mount for Ender 3 v3Mount for nebula camera for Creality Ender 3 v3 printer. Mounted in two holes on right hand side of main frame (M3x10) and as a support, on side of the frame on one screw head (T-screw), original one used for filament spool holder.
Ender 3 S1/pro filament sensor bracketUsed to detach the filament sensor from the original spool holder. You might want to do this when building a custom enclosure for your printer or when using a different spool holder.
Anti-tangle Side Mount Spool Holder Kit Ender 3 V2SliSearch lists public model details and links to the original source. It does not host files or verify licences.