mINI mod for the whole thing so it could fit Ender 5 plus. Also made a new Creality Bolt holder to fit the horizontal bracket EDIT I ADDED A ROLLER WITH A LIP PER A REQUEST FROM A USER I Include a stl to do a single Print everything is in an order so the support brim is all connected for more support for the roller. Update02 I Went Ahead and addthe wall mount and the stand to the mINImod **The first upload was bugged for some reason it's now fixed If you wanna use real bearings instead of plastic use 608zz skate bearings For The Roller Support with cross and 30%fill Brim with 20 lines bed temp 70 20% fill on the roller 1.2mm walls .15 layer speed 50mm/s I also put a tweak at Z and slow the speed to 50% at layer 560 not necessary but my nipple kept coming out weird everything else is the same except the infill should be set to 40-70% I use 50%
Chosen by shared tags first, then category. Each one links to its own marketplace.
A shorter version of my previous filament holder. Filament spool holder with a maximum width of 100 mm. Update 04/02/2024 - additional dimensions of spool holders Bearing size: outer diameter: 22 mm. inner diameter: 8 mm. width: 7 mm.
File types: STLLicence: Personal use only
ThingiverseFreeEnder 3 s1 Pro filament holder with ball bearings. Designed to match the stock one so you can hold two spools of filament on the machine. I used 6000ZZ Ball bearings from Amazon and got 10 for $9.
File types: STLLicence: Attribution
ThingiverseFreeFilament spool holder with 75mm, 80mm, 90mm, 100mm width. Bearing size: outer diameter: 22 mm. inner diameter: 8 mm. width: 7 mm. (I used ABEC9 roller skate bearings)
File types: STLLicence: Personal use only
ThingiverseFreeDeutsch: English is below =) Ich habe diesen Spulenhalter entworfen nach dem Vorbild des TUSH Spoolholders. Diesen habe ich auch verwendet (ist auch sehr gut!), nur ein paar Dinge haben mir daran nicht ganz gefallen. 1.
File types: STEP STLLicence: Attribution
ThingiverseFreeUseful design. This touch feelings very good, so I definitely recommend doing it. This is knob attachment for Creality 3D printers(Ender-3, Ender-3 pro, CR-10). *I don't know suitable for ender-5 and pro.
File types: STLLicence: Attribution
ThingiverseFreeRemix from very good TAKAYUKI_MANO_Ender3_Filament_Spool_Holder I improved the roller for best guide of spool and the reduce the diameter of the nut for insert the spool without having to unscrew the nut every time.
File types: STLLicence: Personal use only
ThingiverseFreeFile types: STLLicence: Attribution
ThingiverseFreeI was uncomfortable with the way the filament reel on my Ender 3 V2 was turning on the spool holder. So, I designed this adjustable spool holder which holds the reel centrally, whilst accommodating various sizes of reel.
File types: STLLicence: Attribution
ThingiverseFreeAngled bracket to fix filament spool holder on left side of ender 3v2. I remade original design, this one uses 2 original t-nuts and screws to fix from left side of the printer. You also need 2x M5 screw and 2x M5 nut.
File types: STLLicence: Personal use only
ThingiverseFreeAfter my Kitten broke several of Matts design I decided to make a tougher version. Also added an spiral quick release to allow filament change out, even if you forget to feed thru it initially, like i do.
File types: STEP STLLicence: Attribution
ThingiverseFree2020 Ender 3 filament guide and cleaner all in One. Version 4 - Single Print with mild support (use tree supports in Cura) and More Rigid Mount To Printer.
File types: STLLicence: Attribution
ThingiverseFreeFile types: STLLicence: Personal use only
ThingiverseFreeJDs_Work designed this filament spool holder because they didn't like the way the original spool holder does not hold the spool centred on the axis of rotation (and neither did I).
File types: STLLicence: Personal use only
ThingiverseFreeThis mod// fix adds a spacer inside the top of hot end that allows a cut length of tubing to be lightly compressed against the nozzle. also taking the extra work of maintaining that seal away from the teeth in the bowden coupler.
File types: F3D STLLicence: Attribution
ThingiverseFreeI created this filament spool roller using 608zz bearings because I didn't like any of the ones out there and this also doesn't use any bolts. Everything snaps together.
File types: STEP STLLicence: Personal use only
ThingiverseFreeFile types: STLLicence: Attribution
ThingiverseFreeHi, If you download and use this, please give it a like and/or a collect! If you print it, please post a make with pictures of the end result! Thank you!
File types: STLLicence: Personal use only
ThingiverseFreeI´ve designed this spool holder for the Ender 3. You only have to attach the original spool holder from the Ender and you can put your spool wherever you want.
File types: STEP STLLicence: Personal use only
ThingiverseFreeA spool holder for Creality 3d printers that will solve 3 common problems. 1- Will hold spools that are wide 2- Will hold spools that have a narrow inner diameter 3- Will minimize friction Print the 6 parts and assemble with 2x 608ZZ...
File types: IGES STEP STLLicence: Personal use only
ThingiverseFreeSupport for the top of the Z lead screw on an Ender 3 3D printer. This is to prevent accidentally bending the lead screw by rotating it by hand unsupported.
File types: STLLicence: Personal use only
ThingiverseFreeThis remix combines the 2020 Snap On Filament Guide - Ender 3 / CR-10 by keithcorcoran and the Ender 3 - Z-Axis Bearing Stabilizer by benawhite.
File types: STLLicence: Attribution
ThingiverseFreeLATEST UPDATE: Pincher Version 2 has been added to the folder for those who would prefer to save a little filament and be able to remove spools even faster than before.
File types: STLLicence: Attribution
ThingiverseFreeWith this adapter it is possible to rotate the reel arm of the Ender-3 V3 KE and SE by 90°. As a result, the center of gravity of the filament reel is no longer outside but above the gantry bridge so that the latter is no longer twisted.
File types: STLLicence: Personal use only
ThingiverseFreeAnother version of filament guide with 6mm airsoft ball bearing. Animation: --- If you are interested in supporting my work and possibly having access to the original STEP file of this model, you can receive it with a small donation.
File types: STLLicence: Personal use only
ThingiverseFreeNo Supports 22mm 608 Bearing TAKAYUKI_MANO_Ender3_Filament_Spool_Holder.STL TAKAYUKI_MANO_Ender3_Filament_Spool_Holder.STEP CAP.STL CAP.STEP
File types: STEP STLLicence: Attribution
ThingiverseFree•Relocates the filament spool from on top of the printers gantry, to the side of the printer right behind the screen.
File types: STLLicence: Attribution
ThingiverseFreeI wanted to have more spools on printer, when I am printing dual color medals. So I looked at my MK3 spool holder, and made a simple dual spool holder for my Ender-3. Its simple to print, and works very well.
File types: STLLicence: Personal use only
ThingiverseFreeThis is an alternative that replaces the original spool holder of the machine. It adapts to the metal part that supports the original axis. The axes are smaller and enter into a spool of filaments with a smaller hole.
File types: STLLicence: Attribution
ThingiverseFreeFile types: STLLicence: Attribution
ThingiverseFreeEnder 3 filament guide and cleaner remixed from original FurioPrints' one. I've found it too long for my needs so I made it more compact and gave it a "techy" look using empty spaces, it's light and very rigid.
File types: STLLicence: Attribution
ThingiverseFreeEnder 3 Z-axis support and filament roller combo No support material or disassembly required! This part was designed to slide perfectly into the top cross member of your Ender 3 or CR10 printer to support the Z-axis screw and provide a...
File types: STEP STLLicence: Attribution
ThingiverseFreeThis Thing is based on kelokera's Bowden Filament Guide WITH!!! Cable holder for Ender 3 and CR's 3d printer and Janubis' soft Bowden Filament Guide with fitting and without Cable holder After I printed kelokera's version I realized that...
File types: OBJ STLLicence: Personal use only
ThingiverseFreeI got the idea by improving the design of the maker "TwinA" I tried to achieve this by reducing the supports and strengthening the fixings. It also showed that the play between the PTFE tube and the filament switch is minimized.
File types: STLLicence: Attribution
ThingiverseFreeThis is an aerodynamically optimized component cooler and extruder cooler. The combination fits through its individual mounting plate on Ender 3 and on the Tronxy x5s. The cooler is the same for both printers.
File types: STL
ThingiverseFreeI used the original thing for some time, but then 2 long prints suffered from under extrusion. I figured out, that the filament got stuck between the lever of the micro switch and the wall. So i measured everything.
File types: STLLicence: Personal use only
ThingiverseFreeQuick and easy way to hold a filament spool on any 2020 extrusion. Uses clips not screws for quick installation and change. - Fits spools from 50-74mm wide using four different width sets of rollers.
File types: STLLicence: Personal use only
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
